Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Optimizing Silanization to Functionalize Stainless Steel Wire: Towards Breast Cancer Stem Cell Isolation

ABSTRACT: Chemically modified metal surfaces have been used to recognize and capture specific cell types and biomolecules. In this work, stainless steel wires were functionalized with aptamers against breast cancer stem cell markers. Stainless steel wires were first electropolished and silanized via electrodeposition. Aptamers were then attached to the silanized surface through a cross-linker. The functionalized wires were able to capture the target cells in an in vitro test. During surface modification steps, wires were analyzed by atomic force microscopy, cyclic voltammetry, scanning electron and fluorescence microscopy to determine their surface composition and morphology. Optimized conditions of silanization (applied potential, solution pH, heat treatment temperature) for obtaining an aptamer-functionalized wire were determined in this work together with the use of several surface characterization techniques suitable for small-sized and circular wires. These modified wires have potential applications for the in vivo capture of target cells in blood flow, since their small size allows their insertion as standard guidewires in biomedical devices.

SUBMITTER: Bekmurzayeva A

PROVIDER: S-EPMC7504676 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mouse Lung Response to Stainless Steel and Mild Steel Welding Fume

Project description:A/J mice are genetically predisposed to spontaneous and/or chemically-induced lung tumors while C57BL/6J (B6) mice are resistant. This genetic disparity provides a unique scenario to identify molecular mechanisms associated with the lung response to welding fume at the transcriptome level.

2010-04-30 | GSE20174 | GEO

Stainless Steel Wire Mesh Supported Molecularly Imprinted Composite Membranes for Selective Separation of Ebracteolata Compound B from Euphorbia fischeriana.

Project description:Stainless steel wire mesh supported molecularly imprinted composite membranes for selective separation of Ebracteolata Compound B (ECB) were prepared based on surface polymerization using ECB separated from Euphorbia fischeriana as a template, acrylamide as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, azodiisobutyronitrile as an initiator, and stainless steel wire mesh as support. Structure and purity of ECB were characterized by nuclear magenetic resonance (¹H-NMR, 13C-NMR) and ultra high performance liquid chromatography (UHPLC). The molecularly imprinted composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The membrane adsorbed on the ECB reached equilibrium about 30 min later, with a maximum adsorption amount of 3.39 μmol/cm². Adsorption behavior between ECB and the molecularly imprinted composite membranes followed pseudo-second-order kinetics equation and Freundlich isotherm model. The molecularly imprinted composite membranes that could selectively identify and transport ECB in similar structures have a permeation rate of 38.71% to ECB. The ECB content in the permeation solution derived from the extract of Euphorbia fischeriana through the imprinted membrane was 87%. Overall, the obtained results demonstrated that an efficient approach with the molecularly imprinted composite membranes for selective separation of ECB from Euphorbia fischeriana.

| S-EPMC6384690 | biostudies-literature

Disposable Stainless-Steel Wire-Based Electrochemical Microsensor for In Vivo Continuous Monitoring of Hydrogen Peroxide in Vein of Tomato Leaf.

Project description:As one of the pivotal signal molecules, hydrogen peroxide (H2O2) has been demonstrated to play important roles in many physiological processes of plants. Continuous monitoring of H2O2 in vivo could help understand its regulation mechanism more clearly. In this study, a disposable electrochemical microsensor for H2O2 was developed. This microsensor consists of three parts: low-cost stainless-steel wire with a diameter of 0.1 mm modified by gold nanoparticles (disposable working electrode), an untreated platinum wire with a diameter of 0.1 mm (counter electrode), and an Ag/AgCl wire with a diameter of 0.1 mm (reference electrode), respectively. The microsensor could detect H2O2 in levels from 10 to 1000 µM and exhibited excellent selectivity. On this basis, the dynamic change in H2O2 in the vein of tomato leaf under high salinity was continuously monitored in vivo. The results showed that the production of H2O2 could be induced by high salinity within two hours. This study suggests that the disposable electrochemical microsensor not only suits continuously detecting H2O2 in microscopic plant tissue in vivo but also reduces the damage to plants. Overall, our strategy will help to pave the foundation for further investigation of the generation, transportation, and elimination mechanism of H2O2 in plants.

| S-EPMC8773776 | biostudies-literature

Preparation of Porous Stainless Steel Hollow-Fibers through Multi-Modal Particle Size Sintering towards Pore Engineering.

Project description:The sintering of metal powders is an efficient and versatile technique to fabricate porous metal elements such as filters, diffusers, and membranes. Neck formation between particles is, however, critical to tune the porosity and optimize mass transfer in order to minimize the densification process. In this work, macro-porous stainless steel (SS) hollow-fibers (HFs) were fabricated by the extrusion and sintering of a dope comprised, for the first time, of a bimodal mixture of SS powders. The SS particles of different sizes and shapes were mixed to increase the neck formation between the particles and control the densification process of the structure during sintering. The sintered HFs from particles of two different sizes were shown to be more mechanically stable at lower sintering temperature due to the increased neck area of the small particles sintered to the large ones. In addition, the sintered HFs made from particles of 10 and 44 ?m showed a smaller average pore size (<1 ?m) as compared to the micron-size pores of sintered HFs made from particles of 10 ?m only and those of 10 and 20 ?m. The novel HFs could be used in a range of applications, from filtration modules to electrochemical membrane reactors.

| S-EPMC5618125 | biostudies-literature

Nanosecond laser coloration on stainless steel surface.

Project description:In this work, we present laser coloration on 304 stainless steel using nanosecond laser. Surface modifications are tuned by adjusting laser parameters of scanning speed, repetition rate, and pulse width. A comprehensive study of the physical mechanism leading to the appearance is presented. Microscopic patterns are measured and employed as input to simulate light-matter interferences, while chemical states and crystal structures of composites to figure out intrinsic colors. Quantitative analysis clarifies the final colors and RGB values are the combinations of structural colors and intrinsic colors from the oxidized pigments, with the latter dominating. Therefore, the engineering and scientific insights of nanosecond laser coloration highlight large-scale utilization of the present route for colorful and resistant steels.

| S-EPMC5541041 | biostudies-literature

RNA-seq of desiccated Cronobacter sakazakii ATCCTM29544 on stainless steel coupons

Project description:Cronobacter sakazakii is well-known for its desiccation tolerance in the powdered infant formula (PIF) food production environment and the bacterium has been linked with high fatality rates in neonates who consume contaminated product. In this study, using deep-level RNA-sequencing, differentially expressed genes were studied in C. sakazakii ATCCTM29544 grown in simulated low-moisture environment designed to mimic the PIF production environment. Desiccation of bacteria was carried out on stainless steel coupons from which total RNA was subsequently recovered and sequenced. During 4 h of desiccation from the early stationary phase (ESP) grown culture, an approximately 3 log10 reduction was recorded for C. sakazakii viable cell count, with the largest change in viable cells occurring between desiccation hour 1 and 2 during which the culture medium was completely dried. Transcriptomic data obtained after 4 h of desiccation highlighted several highly-up regulated osmotolerance-related genes which were associated with the secondary response mechanism. These actively expressed genes mainly modulate pathways that synthetize glycine betaine and trehalose as well as the transport of these two and other compatible solutes. Understanding the activities of these genes and pathways will assist the development of technologies that mitigate the survival of C. sakazakii in the PIF production process.

2021-10-04 | GSE129553 | GEO

Microscale residual stresses in additively manufactured stainless steel.

Project description:Additively manufactured (AM) metallic materials commonly possess substantial microscale internal stresses that manifest as intergranular and intragranular residual stresses. However, the impact of these residual stresses on the mechanical behaviour of AM materials remains unexplored. Here we combine in situ synchrotron X-ray diffraction experiments and computational modelling to quantify the lattice strains in different families of grains with specific orientations and associated intergranular residual stresses in an AM 316L stainless steel under uniaxial tension. We measure pronounced tension-compression asymmetries in yield strength and work hardening for as-printed stainless steel, and show they are associated with back stresses originating from heterogeneous dislocation distributions and resultant intragranular residual stresses. We further report that heat treatment relieves microscale residual stresses, thereby reducing the tension-compression asymmetries and altering work-hardening behaviour. This work establishes the mechanistic connections between the microscale residual stresses and mechanical behaviour of AM stainless steel.

| S-EPMC6761200 | biostudies-literature

Stainless steel weld metal enhanced with carbon nanotubes.

Project description:This paper aims to establish the most indicated route to manufacture a nanostructured powder composed of 5 wt% Multi-walled Carbon Nanotubes and 304LSS powder. Four specimens were prepared using Mechanical Alloying and Chemical Treatment (CT) with Hydrogen Peroxide ([Formula: see text]) as the main processes. A thermal treatment post-processing was used in half of the samples to remove the remaining amorphous carbon and to evaluate its effects. Regarding the powder analysis, attachment, amorphous carbon degree, crystallinity, and doping of the CNT throughout the metal matrix were investigated. The nanostructured powders were then inserted as a core in a 304LSS tubular rod to perform the arc welding process. The CT route eliminated the amorphous carbon and generated more refiner grains, which provided a cross-section hardness gain of more than 40% regarding the 304LSS joint. In summary, the CT route, combined with the GTAW process, provided a new method for nanocomposite manufacturing by combining shorter preparation steps, obtaining an improvement in the microstructural and hardness performance.

| S-EPMC7578026 | biostudies-literature

Bond-Slip Behavior between Stainless Steel Rebars and Concrete.

Project description:Maintenance of reinforced concrete structures is a prevailing topic, especially with regard to lifeline structures and bridges, many of which are now designed with a service life beyond 100 years. Reinforcement made of ordinary (carbon) steel may corrode in aggressive environments. Stainless steel, being much more resistant to corrosion, is a valid solution to facilitate the protection of the works, increasing the service life and reducing the need for repair and maintenance. Despite the potential for stainless steel to reduce maintenance costs, studies investigating the influence of stainless steel on the behavior of reinforced concrete structures are limited. This study investigated the bond behavior of stainless steel rebars by means of experimental tests on reinforced concrete specimens with different concrete cover thicknesses, concrete strengths, and bar diameters. In each case, identical specimens with carbon steel reinforcement were tested for comparison. The failure modes of the specimens were examined, and a bond stress-slip relationship for stainless steel bars was established. This research shows that the bond behavior of stainless steel rebars is comparable to that of carbon steel bars.

| S-EPMC7078846 | biostudies-literature

Electroformation of Giant Unilamellar Vesicles on Stainless Steel Electrodes.

Project description:Giant unilamellar vesicles (GUVs) are well-established model systems for studying membrane structure and dynamics. Electroformation, also referred to as electroswelling, is one of the most prevalent methods for producing GUVs, as it enables modulation of the lipid hydration process to form relatively monodisperse, defect-free vesicles. Currently, however, it is expensive and time-consuming compared with other methods. In this study, we demonstrate that 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine GUVs can be prepared readily at a fraction of the cost on stainless steel electrodes, such as commercially available syringe needles, without any evidence of lipid oxidation or hydrolysis.

| S-EPMC5377273 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data