Dataset Information

Synergizing Sulfonated Hydrothermal Carbon and Microwave Irradiation for Intensified Esterification Reaction.

ABSTRACT: The synergy of sulfonated hydrothermal carbon and microwave (MW) irradiation was applied for the esterification of oleic acid with methanol (MeOH) to produce biodiesel. The effects of temperature, reaction time, ratio of oleic acid to methanol, and catalyst loading were investigated at a fixed MW power of 400 W. The addition of hexane, serving as a co-solvent and separator, was also investigated. The optimum conditions for the proposed process were oleic acid-to-methanol molar ratio of 1:5 and hexane-to-methanol ratio of 0.5 (v/v) in the presence of a 5 wt % catalyst, at 100 °C for 60 min, obtaining a 97% yield of oleic acid methyl ester. The addition of slight amounts of hexane resulted into an eightfold reduction in the amount of MeOH needed to obtain a yield above 90%, which normally required a MeOH-to-oil ratio of 40:1. This proposed novel approach could provide a more cost-effective method for the esterification of oil to produce biodiesel, that is, reactive separation utilizing carbon-based catalysts under MW irradiation.

SUBMITTER: Tumkot L

PROVIDER: S-EPMC7512435 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Carbon dots (CDs) are a diverse and wide-reaching field of study which encompasses multiple scientific disciplines. This, along with their extensive applications, calls for the need to continually seek to improve their synthesis efficiency. To this end, we focused upon the effects of altering the heating method on the characteristics and quality of the final CD product. In our approach, two different versions of heating techniques were used including the common oven-based hydrothermal method and a microwave (MW)-assisted hydrothermal method. The MW-assisted heating involved the implementation of a pressure vessel (similar to oven hydrothermal vessel) for improved yield of luminescent CDs. We found that this MW method yielded CDs of bright intensity with comparable shape, size, and dispersity to that produced using conventional hydrothermal methods. Specifically, the CDs average particle diameters were determined to be between 1.8 and 2.0 nm for either method. The MW method also demonstrated certain advantages over the oven method in terms of required reaction time and particle yield. The total reaction and cooldown time was reduced by ∼75% (with ideal MW heating time) and an estimation of the average CDs particle density revealed that the MW method was able to produce approximately 1.2 times more particles than the oven method in less time. Correcting for the same processing time, larger yields are available in microwave synthesis. We were able to also demonstrate that both versions of synthesized CDs can serve as viable fluorescence probes for in vitro imaging experiments due to the fact that, under the determined working conditions, their fluorescence emission is significantly greater than that of cell autofluorescence [oven: p = 1.47 × 10-27 (blue), p = 6.98 × 10-4 (green); 60 second MW: p = 7.59 × 10-10 (blue), p = 3.03 × 10-4 (green)] and the CDs were not cytotoxic. This rapid, simple synthesis approach can be applied to other forms of carbon dots and serves as a high-yield alternative to hydrothermal synthesis.

Dataset Information

Synergizing Sulfonated Hydrothermal Carbon and Microwave Irradiation for Intensified Esterification Reaction.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets