Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Numerical and Experimental Investigation of Soot Suppression by Acoustic Oscillated Combustion.

ABSTRACT: The soot suppression by acoustic oscillations for acetylene diffusion flames was investigated combining numerical and experimental studies. The combustion and soot formation were predicted by the finite-rate detailed chemistry model and modified Moss-Brookes model, respectively, while the turbulence was predicted by the detached eddy simulation (DES) with a low Reynolds number correction. Experimental results showed that the soot rate almost decreased linearly with the amplitude of acoustic oscillation, and the pinch-off of the flame occurred at a large acoustic oscillation. Numerical results showed that the flame structure was well predicted, while the soot rate was over-predicted at large acoustic oscillations; the consumption of O2 increased obviously with the acoustic oscillation. The soot suppression was mainly caused by the decrease of the surface growth rate when the air was pushed toward the flame.

SUBMITTER: Ye Y

PROVIDER: S-EPMC7513364 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Numerical and Experimental Investigation of Soot Suppression by Acoustic Oscillated Combustion.

Ye Yanghui Y Luo Xinjie X Dong Cong C Xu Yousheng Y Zhang Zhiguo Z

ACS omega 20200909 37

The soot suppression by acoustic oscillations for acetylene diffusion flames was investigated combining numerical and experimental studies. The combustion and soot formation were predicted by the finite-rate detailed chemistry model and modified Moss-Brookes model, respectively, while the turbulence was predicted by the detached eddy simulation (DES) with a low Reynolds number correction. Experimental results showed that the soot rate almost decreased linearly with the amplitude of acoustic osci ...[more]

PMID: 32984706

Similar Datasets

Three-dimensional numerical simulation and experimental investigation of boundary-driven streaming in surface acoustic wave microfluidics.

Project description:Acoustic streaming has been widely used in microfluidics to manipulate various micro-/nano-objects. In this work, acoustic streaming activated by interdigital transducers (IDT) immersed in highly viscous oil is studied numerically and experimentally. In particular, we developed a modeling strategy termed the "slip velocity method" that enables a 3D simulation of surface acoustic wave microfluidics in a large domain (4 × 4 × 2 mm3) and at a high frequency (23.9 MHz). The experimental and numerical results both show that on top of the oil, all the acoustic streamlines converge at two horizontal stagnation points above the two symmetric sides of the IDT. At these two stagnation points, water droplets floating on the oil can be trapped. Based on these characteristics of the acoustic streaming field, we designed a surface acoustic wave microfluidic device with an integrated IDT array fabricated on a 128°YX LiNbO3 substrate to perform programmable, contactless droplet manipulation. By activating IDTs accordingly, the water droplets on the oil can be moved to the corresponding traps. With its excellent capability for manipulating droplets in a highly programmable, controllable manner, our surface acoustic wave microfluidic devices are valuable for on-chip contactless sample handling and chemical reactions.

| S-EPMC6291338 | biostudies-literature

Experimental and Numerical Investigation of Flow Field and Soot Particle Size Distribution of Methane-Containing Gas Mixtures in a Swirling Burner.

Project description:The formation of soot in a swirling flow is investigated experimentally and numerically in the context of biogas combustion using a CO2-diluted methane/oxygen flame. Visualization of the swirling flow field and characterization of the burner geometry is obtained through PIV measurements. The soot particle size distributions under different fuel concentrations and swirling conditions are measured, revealing an overall reduction of soot concentration and smaller particle sizes with increasing swirling intensities and leaner flames. An axisymmetric two-dimensional CFD model, including a detailed combustion reaction mechanism and soot formation submodel, was implemented using a commercial computational fluid dynamics (CFD) code (Ansys Fluent). The results are compared with the experiments, with similar trends observed for the soot size distribution under fuel-lean conditions. However, the model is not accurate enough to capture soot formation in fuel-rich combustion cases. In general, soot particle sizes from the model are much smaller than those observed in the experiments, with possible reasons being the inappropriate modeling in Fluent of governing mechanisms for soot agglomeration, growth, and oxidation for CH4-CO2 mixtures.

| S-EPMC8757356 | biostudies-literature

Numerical and experimental study of pyrophoric activated metal Mg surface combustion characteristics.

Project description:The combustion of multi-hole pyrophoric activated metal is solid combustion and the combustion mechanism is quite complex, which is a difficult problem to be solved. Once the pyrophoric activated metal is exposed to air, the oxygen diffuses to the interior of the activated metal within plenty of holes and reacts with it, which enlarges the contact area with oxygen. Consequently, the whole combustion is vigorous and the temperature rises rapidly. To study the combustion mechanism of the chaff, the surface heat balance equation is established in this work by taking Mg as the activated metal. To solve this equation, the chaff adiabatic wall temperature distribution is computed by computational fluid dynamics in the presence of high-speed airflow. Then, the chaff surface temperature distribution is obtained by solving the heat balance equations. Finally, numerical and experimental results obtained via an infrared thermal imager are compared to demonstrate the effectiveness of the established equation.

| S-EPMC5990799 | biostudies-literature

Soot Combustion over Nanostructured Ceria with Different Morphologies.

Project description:In this study, nano-structure ceria with three different morphologies (nanorod, nanoparticle and flake) have been prepared by hydrothermal and solvothermal methods. The ceria samples were deeply characterized by XRD, SEM, TEM, H2-TPR, XPS and in-situ DRIFTS, and tested for soot combustion in absence/presence NO atmospheres under loose and tight contact conditions. The prepared ceria samples exhibit excellent catalytic activities, especially, the CeO2 with nanorod (Ce-R) shows the best catalytic activity, for which the peak temperature of soot combustion (Tm) is about 500 and 368?°C in loose and tight contact conditions, respectively. The catalytic activity for Ce-R is higher than that of the reported CeO2 catalysts and reaches a level that of precious metals. The characterization results reveal that the maximal amounts of adsorbed oxygen species on the surface of the nanostructure Ce-R catalyst should be the crucial role to decide the catalytic soot performance. High BET surface area may also be a positive effect on soot oxidation activity under loose contact conditions.

| S-EPMC4926248 | biostudies-literature

Experimental and numerical studies on standing surface acoustic wave microfluidics.

Project description:Standing surface acoustic waves (SSAW) are commonly used in microfluidics to manipulate cells and other micro/nano particles. However, except for a simple one-dimensional (1D) harmonic standing waves (HSW) model, a practical model that can predict particle behaviour in SSAW microfluidics is still lacking. Herein, we established a two-dimensional (2D) SSAW microfluidic model based on the basic theory in acoustophoresis and our previous modelling strategy to predict the acoustophoresis of microparticles in SSAW microfluidics. This 2D SSAW microfluidic model considers the effects of boundary vibrations, channel materials, and channel dimensions on the acoustic propagation; as an experimental validation, the acoustophoresis of microparticles under continuous flow through narrow channels made of PDMS and silicon was studied. The experimentally observed motion of the microparticles matched well with the numerical predictions, while the 1D HSW model failed to predict many of the experimental observations. Particularly, the 1D HSW model cannot account for particle aggregation on the sidewall in PDMS channels, which is well explained by our 2D SSAW microfluidic model. Our model can be used for device design and optimization in SSAW microfluidics.

| S-EPMC4856433 | biostudies-literature

Experimental and numerical studies on combustion characteristics of N2-diluted CH4 and O2 diffusion combustion in a packed bed.

Project description:Experimental and numerical studies were conducted to determine the combustion characteristics of gas diffusion combustion in a porous combustor packed with 2.5 mm or 3.5 mm alumina pellets, special attention being focused on the effect of packed bed height (h) on combustion, NO and CO emissions. The pollutant emission of diffusion filtration combustion is studied with different packed bed lengths in the range of 40 mm ? h ? 240 mm, fixed excess air ratio of 1.88 and fixed gas inlet velocity of 0.06 m s-1. Results show that both immersed and surface flames coexist in the combustor. Although porous media enhance the mixing and diffusion processes, the diffusion flame shape is still observed from the side and top views of the combustor, and the diffusion filtration retains properties of diffusion combustion. The immersed flame is always observed with increase in h, whereas the height of surface flame decreases. The NO emission decreases sharply when h is increased from 40 mm to 120 mm. However, the NO emission decreases slightly when h > 120 mm. In the investigated range of h, it is shown that h has a significant influence on the CO emission, an increase in h leading to a constant increase in CO for the combustors packed with 2.5 mm or 3.5 mm pellets. The maximum CO emission is 662 ppm and the minimum value is 67 ppm. In the scope of this study, the temperature on the external wall of the combustor reaches 434-513°C.

| S-EPMC6774936 | biostudies-literature

Plausibility of potassium ion-exchanged ZSM-5 as soot combustion catalysts.

Project description:Potassium (K) ion-exchanged ZSM-5 zeolites were investigated for catalytic soot combustion. X-ray absorption fine-structure (XAFS), Raman, in situ IR and NH3-temperature programmed desorption (NH3-TPD) confirmed the location of K+ at the ion-exchanged sites. Temperature-programmed oxidation (TPO) reactions showed that K-ZSM-5 decreased ignition tempeatures of soot combustion and increased selectivity to CO2. The improved activity for soot combustion by increasing K+-exchanged amounts via decreasing the Si/Al ratio reinforced the K+ ions participating in soot combustion. 18O2 isotopic isothermal reactions suggested the activation of gaseous oxygen by the K+ ions. This demonstrated a new appliction of alkali metal exchanged zeolites and the strategy for enhancement of catalytic soot combustion activity.

| S-EPMC5468242 | biostudies-literature

Micron-sized particle separation with standing surface acoustic wave-Experimental and numerical approaches.

Project description:Traditional cell/particle isolation methods are time-consuming and expensive and can lead to morphology disruptions due to high induced shear stress. To address these problems, novel lab-on-a-chip-based purification methods have been employed. Among various methods introduced for the separation and purification of cells and synthetics particles, acoustofluidics has been one of the most effective methods. Unlike traditional separation techniques carried out in clinical laboratories based on chemical properties, the acoustofluidic process relies on the physical properties of the sample. Using acoustofluidics, manipulating cells and particles can be achieved in a label-free, contact-free, and highly biocompatible manner. To optimize the functionality of the platform, the numerical study should be taken into account before conducting experimental tests to save time and reduce fabrication expenses. Most current numerical studies have only considered one-dimensional harmonic standing waves to simulate the acoustic pressure distribution. However, one-dimensional simulations cannot calculate the actual acoustic pressure distribution inside the microchannel due to its limitation in considering longitudinal waves. To address this limitation, a two-dimensional numerical simulation was conducted in this study. Our numerical simulation investigates the effects of the platform geometrical and operational conditions on the separation efficiency. Next, the optimal values are tested in an experimental setting to validate these optimal parameters and conditions. This work provides a guideline for future acoustofluidic chip designs with a high degree of reproducibility and efficiency.

| S-EPMC8267599 | biostudies-literature

A unified intermediate and mechanism for soot combustion on potassium-supported oxides.

Project description:The soot combustion mechanism over potassium-supported oxides (MgO, CeO2 and ZrO2) was studied to clarify the active sites and discover unified reaction intermediates in this typical gas-solid-solid catalytic reaction. The catalytically active sites were identified as free K(+) rather than K2CO3, which can activate gaseous oxygen. The active oxygen spills over to soot and forms a common intermediate, ketene, before it was further oxidized into the end product CO2. The existence of ketene species was confirmed by density functional theory (DFT) calculations. The oxygen spillover mechanism is proposed, which is explained as an electron transfer from soot to gaseous oxygen through the active K(+) sites. The latter mechanism is confirmed for the first time since it was put forward in 1950, not only by ultraviolet photoelectron spectroscopy (UPS) results but also by semi-empirical theoretical calculations.

| S-EPMC3989558 | biostudies-literature

Numerical and Experimental Investigation of Oil Palm Shell Reinforced Rubber Composites.

Project description:This paper presents a pioneering effort to ascertain the suitability of hyperelastic modelling in simulating the stress-strain response of oil palm shell reinforced rubber (ROPS) composites. ROPS composites with different oil palm shell contents (0%, 5%, 10% and 20% by volume) were cast in the laboratory for the experimental investigation. ROPS specimens with circular, square, hexagon, and octagon shapes (loading surface) were considered to evaluate the accuracy of finite element simulation considering the shape effect of composites. Strain-controlled (compressive) tests with ? ? 50% at 0.8 Hz frequency were conducted in the laboratory and the test data obtained was used as input to simulate material coefficients corresponding to the strain energy functions chosen. Five different strain energy functions were selected and utilized for the hyperelastic modelling in this study using finite element approach. The shape effect was then used to ascertain any variation in the simulation outcomes and to discuss the effect of shape on the behaviour of ROPS composites in comparison to existing literature. The numerical predictions using the Yeoh model (error ? 2.7% for circular shaped ROPS) were found to perform best in comparison with the experimental results, thus a more stable and suitable hyperelastic model to this end. The Marlow (error ? 4.6% for circular shaped ROPS) and Arruda Boyce (error ? 4.7% for circular shaped ROPS) models were amongst the next alternatives to perform better. Even with the other shapes considered in this study, Yeoh, followed by the Marlow function, were more appropriate models. The shape effect was then studied with particular emphasis on comparing and assessing them with that observed in the literature. To this end, adopting the Yeoh function in the finite element model is the ideal approach to estimate the stress-strain response of ROPS composites.

| S-EPMC7077467 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data