Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Long‐Living Holes in Grey Anatase TiO2 Enable Noble‐Metal‐Free and Sacrificial‐Agent‐Free Water Splitting

ABSTRACT: Abstract Titanium dioxide has been the benchmark semiconductor in photocatalysis for more than 40 years. Full water splitting, that is, decomposing water into H2 and O2 in stoichiometric amounts and with an acceptable activity, still remains a challenge, even when TiO2‐based photocatalysts are used in combination with noble‐metal co‐catalysts. The bottleneck of anatase‐type TiO2 remains the water oxidation, that is, the hole transfer reaction from pristine anatase to the aqueous environment. In this work, we report that “grey” (defect engineered) anatase can provide a drastically enhanced lifetime of photogenerated holes, which, in turn, enables an efficient oxidation reaction of water to peroxide via a two‐electron pathway. As a result, a Ni@grey anatase TiO2 catalyst can be constructed with an impressive performance in terms of photocatalytic splitting of neutral water into H2 and a stoichiometric amount of H2O2 without the need of any noble metals or sacrificial agents. The finding of long hole lifetimes in grey anatase opens up a wide spectrum of further photocatalytic applications of this material. Long‐living photogenerated holes: Grey anatase, in comparison to white anatase, provides a drastically enhanced lifetime for trapped photogenerated holes. This allows to construct a Ni@grey anatase TiO2 catalyst that can photocatalytically split neutral water into H2 and a stoichiometric amount of H2O2 without the need of any noble metals or sacrificial agents.Institute and/or researcher Twitter usernames: @FAU_Germany

SUBMITTER: Liu N

PROVIDER: S-EPMC7540354 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Acidic Peptizing Agent Effect on Anatase-Rutile Ratio and Photocatalytic Performance of TiO2 Nanoparticles.

Project description:TiO2 nanoparticles were synthesized from titanium isopropoxide by a simple peptization method using sulfuric, nitric, and acetic acids. The effect of peptizing acid on physicochemical and photocatalytic properties of TiO2 powders was studied. The structural properties of synthesized TiO2 powders were analyzed by using XRD, TEM, N2-physisorption, Raman, DR UV-vis, FTIR, and X-ray photoelectron spectroscopy techniques. The characterization results showed that acetic acid peptization facilitated the formation of pure anatase phase after thermal treatment at 500 °C; in contrast, nitric acid peptization led to a major rutile phase formation (67%). Interestingly, the sample peptized using sulfuric acid yielded 95% anatase and 5% rutile phases. The photocatalytic activity of synthesized TiO2 nanoparticles was evaluated for degradation of selected organic dyes (crystal violet, methylene blue, and p-nitrophenol) in aqueous solution. The results confirmed that the TiO2 sample peptized using nitric acid (with rutile and anatase phases in 3:1 ratio) offered the highest activity for degradation of organic dyes, although, TiO2 samples peptized using sulfuric acid and acetic acid possessed smaller particle size, higher band gap energy, and high surface area. Interestingly, TiO2 sample peptized with nitric acid possessed relatively high theoretical photocurrent density (0.545 mAcm-2) and pore diameter (150 Å), which are responsible for high electron-hole separation efficiency and diffusion and mass transportation of organic reactants during the photochemical degradation process. The superior activity of TiO2 sample peptized with nitric acid is due to the effective transfer of photogenerated electrons between rutile and anatase phases.

| S-EPMC5807258 | biostudies-literature

Expression data from C. elegans treated with anatase TiO2 nanoparticles

Project description:The nematode C. elegans was exposed to TiO2 nanoparticles (NPs) to evaluate the ecotoxicity of TiO2 nanoparticles. We used the DNA microarray method to understand changes in gene expression after the exposure to TIO2 NPs. We identified various genes involved in metal detoxification as well as in regulating worm development.

2017-03-03 | GSE95603 | GEO

Phase stability frustration on ultra-nanosized anatase TiO2.

Project description:This work sheds light on the exceptional robustness of anatase TiO2 when it is downsized to an extreme value of 4?nm. Since at this size the surface contribution to the volume becomes predominant, it turns out that the material becomes significantly resistant against particles coarsening with temperature, entailing a significant delay in the anatase to rutile phase transition, prolonging up to 1000?°C in air. A noticeable alteration of the phase stability diagram with lithium insertion is also experienced. Lithium insertion in such nanocrystalline anatase TiO2 converts into a complete solid solution until almost Li1TiO2, a composition at which the tetragonal to orthorhombic transition takes place without the formation of the emblematic and unwished rock salt Li1TiO2 phase. Consequently, excellent reversibility in the electrochemical process is experienced in the whole portion of lithium content.

| S-EPMC4455250 | biostudies-literature

CdTiO3-NPs incorporated TiO2 nanostructure photocatalyst for scavenger-free water splitting under visible radiation.

Project description:Nanofibrous morphology and the doping technique can overcome the problem of electron/hole fast recombination and improve the activity of titanium oxide-based photocatalysts. In this study, nanoparticulate and nanofibrous forms of CdTiO3-incorporated TiO2 were synthesized with different cadmium contents; the morphology and composition were determined by SEM, TEM, EDX, and XRD techniques. The nanomorphology, cadmium content, and reaction temperature of Cd-doped TiO2 nanostructures were found to be strongly affect the hydrogen production rate. Nanofibrous morphology improves the rate of hydrogen evolution by around 10 folds over the rate for nanoparticles due to electron confinement in 0D nanostructures. The average rates of hydrogen production for samples of 0.5 wt.% Cd are 0.7 and 16.5 ml/gcat.min for nanoparticles and nanofibers, respectively. On the other hand, cadmium doping resulted in increasing the hydrogen production rate from 9.6 to 19.7 ml/gcat.min for pristine and Cd-doped (2 wt%) TiO2 nanofibers, respectively. May be the formation of type I heterostructures between the TiO2 matrix and CdTiO3 nanoparticles is the main reason for the observed enhancement of photocatalytic activity due to the strong suppressing of electron/holes recombination process. Consequently, the proposed photocatalyst could be exploited to produce hydrogen from scavenger-free solution. Varying reaction temperature suggests that hydrogen evolution over the proposed catalyst is incompatible with the Arrhenius equation. In particular, reaction temperature was found to have a negative influence on photocatalytic activity. This work shows the prospects for using CdTiO3 as a co-catalyst in photon-induced water splitting and indicates a substantial enhancement in the rate of hydrogen production upon using the proposed photocatalyst in nanofibrous morphology.

| S-EPMC9578619 | biostudies-literature

Noble metal-modified faceted anatase titania photocatalysts: Octahedron versus decahedron.

Project description:Octahedral anatase particles (OAP, with eight equivalent {101} facets) and decahedral anatase particles (DAP, with two additional {001} facets) were modified with nanoparticles of noble metals (Au, Ag, Cu). The titania morphology, expressed by the presence of different arrangements of exposed crystal facets, played a key role in the photocatalytic properties of metal-modified faceted titania. In the UV/vis systems, two-faceted configuration of DAP was more favorable for the reaction efficiency than single-faceted OAP because of an efficient charge separation described by the transfer of electrons to {101} facets and holes to {001} facets. Time-resolved microwave conductivity (TRMC) and reversed double-beam photoacoustic spectroscopy (RDB-PAS) confirmed that distribution of electron traps (ET) and mobility of electrons were key-factors of photocatalytic activity. In contrast, metal-modified OAP samples had higher photocatalytic activity than metal-modified DAP and metal-modified commercial titania samples under visible light irradiation. This indicates that the presence of single type of facets ({101}) is favorable for efficient electron transfer via shallow ET, whereas intrinsic properties of DAP result in fast charge carriers' recombination when gold is deposited on {101} facets (migration of "hot" electrons: Au?{101}?Au).

| S-EPMC6100264 | biostudies-literature

Understanding the anatase-rutile phase junction in charge separation and transfer in a TiO2 electrode for photoelectrochemical water splitting.

Project description:New insight into junction-based designs for efficient charge separation is vitally important for current solar energy conversion research. Herein, an anatase-rutile phase junction is elaborately introduced into TiO2 films by rapid thermal annealing treatment and the roles of phase junction on charge separation and transfer are studied in detail. A combined study of transient absorption spectroscopy, electrochemical and photoelectrochemical (PEC) measurements reveals that appropriate phase alignment is essential for unidirectional charge transfer, and a junction interface with minimized trap states is crucial to liberate the charge separation potential of the phase junction. By tailored control of phase alignment and interface structure, an optimized TiO2 film with an appropriately introduced phase junction shows superior performance in charge separation and transfer, hence achieving ca. 3 and 9 times photocurrent density enhancement compared to pristine anatase and rutile phase TiO2 electrodes, respectively. This work demonstrates the great potential of phase junctions for efficient charge separation and transfer in solar energy conversion applications.

| S-EPMC6022233 | biostudies-other

Methanol on Anatase TiO2 (101): Mechanistic Insights into Photocatalysis.

Project description:The photoactivity of methanol adsorbed on the anatase TiO2 (101) surface was studied by a combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), X-ray photoemission spectroscopy (XPS), and density functional theory (DFT) calculations. Isolated methanol molecules adsorbed at the anatase (101) surface show a negligible photoactivity. Two ways of methanol activation were found. First, methoxy groups formed by reaction of methanol with coadsorbed O2 molecules or terminal OH groups are photoactive, and they turn into formaldehyde upon UV illumination. The methoxy species show an unusual C 1s core-level shift of 1.4 eV compared to methanol; their chemical assignment was verified by DFT calculations with inclusion of final-state effects. The second way of methanol activation opens at methanol coverages above 0.5 monolayer (ML), and methyl formate is produced in this reaction pathway. The adsorption of methanol in the coverage regime from 0 to 2 ML is described in detail; it is key for understanding the photocatalytic behavior at high coverages. There, a hydrogen-bonding network is established in the adsorbed methanol layer, and consequently, methanol dissociation becomes energetically more favorable. DFT calculations show that dissociation of the methanol molecule is always the key requirement for hole transfer from the substrate to the adsorbed methanol. We show that the hydrogen-bonding network established in the methanol layer dramatically changes the kinetics of proton transfer during the photoreaction.

| S-EPMC5634753 | biostudies-literature

Double Perovskite Cobaltites Integrated in a Monolithic and Noble Metal-Free Photoelectrochemical Device for Efficient Water Splitting.

Project description:Water photoelectrolysis has the potential to produce renewable hydrogen fuel, therefore addressing the intermittent nature of sunlight. Herein, a monolithic, photovoltaic (PV)-assisted water electrolysis device of minimal engineering and of low (in the μg range) noble-metal-free catalysts loading is presented for unassisted water splitting in alkaline media. An efficient double perovskite cobaltite catalyst, originally developed for high-temperature proton-conducting ceramic electrolyzers, possesses high activity for the oxygen evolution reaction in alkaline media at room temperatures too. Ba1-xGd1-yLax+yCo2O6-δ (BGLC) is combined with a NiMo cathode, and a solar-to-hydrogen efficiency of 6.6% in 1.0 M NaOH, under 1 sun simulated illumination for 71 h, is demonstrated. This work highlights how readily available earth-abundant materials and established PV methods can achieve high performance and stable and monolithic photoelectrolysis devices with potential for full-scale applications.

| S-EPMC8289171 | biostudies-literature

Self-hydrogenated shell promoting photocatalytic H2 evolution on anatase TiO2.

Project description:As one of the most important photocatalysts, TiO2 has triggered broad interest and intensive studies for decades. Observation of the interfacial reactions between water and TiO2 at microscopic scale can provide key insight into the mechanisms of photocatalytic processes. Currently, experimental methodologies for characterizing photocatalytic reactions of anatase TiO2 are mostly confined to water vapor or single molecule chemistry. Here, we investigate the photocatalytic reaction of anatase TiO2 nanoparticles in water using liquid environmental transmission electron microscopy. A self-hydrogenated shell is observed on the TiO2 surface before the generation of hydrogen bubbles. First-principles calculations suggest that this shell is formed through subsurface diffusion of photo-reduced water protons generated at the aqueous TiO2 interface, which promotes photocatalytic hydrogen evolution by reducing the activation barrier for H2 (H-H bond) formation. Experiments confirm that the self-hydrogenated shell contains reduced titanium ions, and its thickness can increase to several nanometers with increasing UV illuminance.

| S-EPMC6048119 | biostudies-literature

First-Principles Band Alignments at the Si:Anatase TiO2 Interface

Project description:TiO2 has been identified as a promising electron

| S-EPMC10249118 | biostudies-literature