Development of a fully automated high throughput PCR for the detection of SARS-CoV-2: The need for speed.
Ontology highlight
ABSTRACT:
SUBMITTER: Mayer FJ
PROVIDER: S-EPMC7549918 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:IntroductionMolecular testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continues to suffer from delays and shortages. Antigen tests have recently emerged as a viable alternative to detect patients with high viral loads, associated with elevated risk of transmission. While rapid lateral flow tests greatly improved accessibility of SARS-CoV-2 detection in critical areas, their manual nature limits scalability and suitability for large-scale testing schemes. The Elecsys® SARS-CoV-2 Antigen assay allows antigen immunoassays to be carried out on fully automated high-throughput serology platforms.MethodsA total of 3139 nasopharyngeal and oropharyngeal swabs were collected at 3 different testing sites in Germany. Swab samples were pre-characterized by reverse transcription real-time polymerase chain reaction (RT-qPCR) and consecutively subjected to the antigen immunoassay on either the cobas e 411 or cobas e 801 analyzer.ResultsOf the tested respiratory samples, 392 were PCR positive for SARS-CoV-2 RNA. Median concentration was 2.95 × 104 (interquartile range [IQR] 5.1 × 102-3.5 × 106) copies/ml. Overall sensitivity and specificity of the antigen immunoassay were 60.2% (95% confidence interval [CI] 55.2-65.1) and 99.9% (95% CI 99.6-100.0), respectively. A 93.7% (95% CI 89.7-96.5) sensitivity was achieved at a viral RNA concentration ≥ 104 copies/ml (~ cycle threshold [Ct] value < 29.9).ConclusionThe Elecsys SARS-CoV-2 Antigen assay reliably detected patient samples with viral loads ≥ 10,000 copies/ml. It thus represents a viable high-throughput alternative for screening of patients or in situations where PCR testing is not readily available.
| S-EPMC8351226 | biostudies-literature
Project description:As of July 22, 2020, more than 14.7 million infections of SARS-CoV-2, the virus responsible for Coronavirus Disease 2019 (COVID-19), have been confirmed globally. Serological assays are essential for community screening, assessing infection prevalence, aiding identification of infected patients, and enacting appropriate treatment and quarantine protocols in the battle against this rapidly expanding pandemic. Antibody detection by agglutination-PCR (ADAP) is a pure solution phase immunoassay that generates a PCR amplifiable signal when patient antibodies agglutinate DNA-barcoded antigen probes into a dense immune complex. Here, we present an ultrasensitive and high-throughput automated liquid biopsy assay based on the Hamilton Microlab ADAP STAR automated liquid-handling platform, which was developed and validated for the qualitative detection of total antibodies against spike protein 1 (S1) of SARS-CoV-2 that uses as little as 4 µL of serum. To assess the clinical performance of the ADAP assay, 57 PCR-confirmed COVID-19 patients and 223 control patients were tested. The assay showed a sensitivity of 98% (56/57) and a specificity of 99.55% (222/223). Notably, the SARS-CoV-2-negative control patients included individuals with other common coronaviral infections, such as CoV-NL63 and CoV-HKU, which did not cross-react. In addition to high performance, the hands-free automated workstation enabled high-throughput sample processing to reduce screening workload while helping to minimize analyst contact with biohazardous samples. Therefore, the ADAP STAR liquid-handling workstation can be used as a valuable tool to address the COVID-19 global pandemic.
| S-EPMC7441286 | biostudies-literature
Project description:Introduction. Laboratories worldwide are facing high demand for molecular testing during the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, which might be further aggravated by the upcoming influenza season in the northern hemisphere.Gap Statement. Given that the symptoms of influenza are largely indistinguishable from those of coronavirus disease 2019 (COVID-19), both SARS-CoV-2 and the influenza viruses require concurrent testing by RT-PCR in patients presenting with symptoms of respiratory tract infection.Aim. We adapted and evaluated a laboratory-developed multiplex RT-PCR assay for simultaneous detection of SARS-CoV-2 (dual target), influenza A and influenza B (SC2/InflA/InflB-UCT) on a fully automated high-throughput system (cobas6800).Methodology. Analytical performance was assessed by serial dilution of quantified reference material and cell culture stocks in transport medium, including pretreatment for chemical inactivation. For clinical evaluation, residual portions of 164 predetermined patient samples containing SARS-CoV-2 (n=52), influenza A (n=43) or influenza B (n=19), as well as a set of negative samples, were subjected to the novel multiplex assay.Results. The assay demonstrated comparable analytical performance to currently available commercial tests, with limits of detection of 94.9 cp ml-1 for SARS-CoV-2, 14.6 cp ml-1 for influenza A and 422.3 cp ml-1 for influenza B. Clinical evaluation showed excellent agreement with the comparator assays (sensitivity of 98.1, 97.7 and 100 % for Sars-CoV-2 and influenza A and B, respectively).Conclusion. The SC2/InflA/InflB-UCT allows for efficient high-throughput testing for all three pathogens and thus provides streamlined diagnostics while conserving resources during the influenza season.
| S-EPMC8131019 | biostudies-literature
Project description:BackgroundThe severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) outbreak has had a significant impact on public health and the global economy. Several diagnostic tools are available for the detection of infectious diseases, with reverse transcription-polymerase chain reaction (RT-PCR) testing specifically recommended for viral RNA detection. However, this diagnostic method is costly, complex, and time-consuming. Although it does not have sufficient sensitivity, antigen detection by an immunoassay is an inexpensive and simpler alternative to RT-PCR. Here, we developed an ultrahigh sensitivity digital immunoassay (d-IA) for detecting SARS-CoV-2 nucleocapsid (N) protein as antigens using a fully automated desktop analyzer based on a digital enzyme-linked immunosorbent assay.MethodsWe developed a fully automated d-IA desktop analyzer and measured the viral N protein as an antigen in nasopharyngeal (NP) swabs from patients with coronavirus disease. We studied nasopharyngeal swabs of 159 and 88 patients who were RT-PCR-negative and RT-PCR-positive, respectively.ResultsThe limit of detection of SARS-CoV-2 d-IA was 0.0043 pg/mL of N protein. The cutoff value was 0.029 pg/mL, with a negative RT-PCR distribution. The sensitivity of RT-PCR-positive specimens was estimated to be 94.3% (83/88). The assay time was 28 min.ConclusionsOur d-IA system, which includes a novel fully automated desktop analyzer, enabled detection of the SARS-CoV-2 N-protein with a comparable sensitivity to RT-PCR within 30 min. Thus, d-IA shows potential for SARS-CoV-2 detection across multiple diagnostic centers including small clinics, hospitals, airport quarantines, and clinical laboratories.
| S-EPMC9496537 | biostudies-literature
Project description:Severe acute respiratory syndrome (SARS) is an acute newly emerged infectious respiratory illness. The etiologic agent of SARS was named 'SARS-associated coronavirus' (SARS-CoV) that can be detected with reverse transcription-polymerase chain reaction (RT-PCR) assays. In this study, 12 sets of nested primers covering the SARS-CoV genome have been screened and showed sufficient sensitivity to detect SARS-CoV in RNA isolated from virus cultured in Vero 6 cells. To optimize further the reaction condition of those nested primers sets, seven sets of nested primers have been chosen to compare their reverse transcribed efficiency with specific and random primers, which is useful to combine RT with the first round of PCR into a one-step RT-PCR. Based on the sensitivity and simplicity of results, the no. 73 primer set was chosen as the candidate primer set for clinical diagnoses. To specify the amplicon to minimize false positive results, a Taqman RT-nested PCR system of no. 73 nested primer set was developed. Through investigations on a test panel of whole blood obtained from 30 SARS patients and 9 control persons, the specificity and sensitivity of the Taqman RT-nested PCR system was found to be 100 and 83%, respectively, which suggests that the method is a promising one to diagnose SARS in early stages.
| S-EPMC7119531 | biostudies-literature
Project description:BackgroundSerological test is an essential surveillance tool to track down the extensiveness of SARS-CoV-2 transmission and subsequently to move out from the enforced lockdown stage.ObjectiveThe study measures the diagnostic accuracy of three popular chemiluminescent immunoassay (CLIA) based automated platforms for the detection of anti-SARS-CoV-2 antibodies and compares their agreements.Study designSerum samples of 594 COVID-19 positive patients and 100 samples from pre-COVID cases were tested by three CLIA based automated platforms: Abbott architect i2000SR, Roche cobas e411 and Yhlo iFlash 1800 and their diagnostic accuracy were compared by the area under the curves (AUC) value obtained from receiver operator characteristic (ROC) curves. Cohen's kappa statistic and McNemar's test were used to interpret the agreement between the platforms.ResultsAll three platforms showed high specificity as claimed by the manufacturer. Sensitivity was calculated as 64.48 % (58.67-70.3) for Abbott, 80.48 % (76.62-84.34) for Roche and 76.94 % (72.65-81.23) for Yhlo. AUC was maximum for Roche (0.929). The Cohen's kappa value was determined in between 0.69-0.89 as the inter-rater agreements.ConclusionThe overall statistical analysis demonstrated cobas e411 as the diagnostically most accurate platform among the three.
| S-EPMC7934617 | biostudies-literature
Project description:The COVID-19 pandemic caused by the new SARS-CoV-2 coronavirus has imposed severe challenges on laboratories in their effort to achieve sufficient diagnostic testing capability for identifying infected individuals. In this study, we report the analytical and clinical performance characteristics of a new, high-throughput, fully automated nucleic acid amplification test system for the detection of SARS-CoV-2. The assay utilizes target capture, transcription-mediated amplification, and acridinium ester-labeled probe chemistry on the automated Panther system to directly amplify and detect two separate target sequences in the open reading frame 1ab (ORF1ab) region of the SARS-CoV-2 RNA genome. The probit 95% limit of detection of the assay was determined to be 0.004 50% tissue culture infective dose (TCID50)/ml using inactivated virus and 25 copies/ml (c/ml) using synthetic in vitro transcript RNA targets. Analytical sensitivity (100% detection) was confirmed to be 83 to 194 c/ml using three commercially available SARS-CoV-2 nucleic acid controls. No cross-reactivity or interference was observed with testing of six related human coronaviruses, as well as 24 other viral, fungal, and bacterial pathogens, at high titers. Clinical nasopharyngeal swab specimen testing (n = 140) showed 100%, 98.7%, and 99.3% positive, negative, and overall agreement, respectively, with a validated reverse transcription-PCR nucleic acid amplification test (NAAT) for SARS-CoV-2 RNA. These results provide validation evidence for a sensitive and specific method for pandemic-scale automated molecular diagnostic testing for SARS-CoV-2.
| S-EPMC7512162 | biostudies-literature
Project description:Recent advances in stem cell technology have led to the development of three-dimensional (3D) culture systems called organoids, which have fueled hopes to bring about the next generation of more physiologically relevant high throughput screens (HTS). However, the adaptation of established organoid protocols for HTS applications has so far been elusive. Here, we present a fully scalable, HTS-compatible workflow for the automated generation, maintenance, whole mount staining, clearing, and optical analysis of human neural organoids generated from neural precursor cells in a standard 96-well format. By combining organoid generation and analysis steps in an automated fashion, we can perform quantitative whole-organoid high content imaging with single cell resolution. The resulting organoids are highly homogeneous with regard to their morphology, size, global gene expression, cellular composition, and structure. Calcium imaging suggests organoid-wide synchronized functional coupling. The scalability of our approach has the potential to form the basis for 3D tissue-based screening in a variety of applications including drug development, toxicology studies, and disease modeling.
2020-09-28 | GSE119060 | GEO
Project description:Pneumocystis jirovecii is an opportunistic pathogen in immunocompromised and AIDS patients. Detection by quantitative PCR is faster and more sensitive than microscopic diagnosis yet requires specific infrastructure. We adapted a real-time PCR amplifying the major surface glycoprotein (MSG) target from Pneumocystis jirovecii for use on the new BD MAX platform. The assay allowed fully automated DNA extraction and multiplex real-time PCR. The BD MAX assay was evaluated against manual DNA extraction and conventional real-time PCR. The BD MAX was used in the research mode running a multiplex PCR (MSG, internal control, and sample process control). The assay had a detection limit of 10 copies of an MSG-encoding plasmid per PCR that equated to 500 copies/ml in respiratory specimens. We observed accurate quantification of MSG targets over a 7- to 8-log range. Prealiquoting and sealing of the complete PCR reagents in conical tubes allowed easy and convenient handling of the BD MAX PCR. In a retrospective analysis of 54 positive samples, the BD MAX assay showed good quantitative correlation with the reference PCR method (R(2) = 0.82). Cross-contamination was not observed. Prospectively, 278 respiratory samples were analyzed by both molecular assays. The positivity rate overall was 18.3%. The BD MAX assay identified 46 positive samples, compared to 40 by the reference PCR. The BD MAX assay required liquefaction of highly viscous samples with dithiothreitol as the only manual step, thus offering advantages for timely availability of molecular-based detection assays.
| S-EPMC3697687 | biostudies-literature
Project description:The severe acute respiratory syndrome (SARS) epidemic originating from China in 2002 was caused by a previously uncharacterized coronavirus that could be identified by specific RT-PCR amplification. Efforts to control future SARS outbreaks depend on the accurate and early identification of SARS-CoV infected patients. A real-time fluorogenic RT-PCR assay based on the 3'-noncoding region (3'-NCR) of SARS-CoV genome was developed as a quantitative SARS diagnostic tool. The ideal amplification efficiency of a sensitive SARS-CoV RT-PCR assay should yield an E value (PCR product concentration increase per amplification cycle) equal to 2.0. It was demonstrated that the 3'-NCR SARS-CoV based RT-PCR reactions could be formulated to reach excellent E values of 1.81, or 91% amplification efficacy. The SARS-CoV cDNA preparations derived from viral RNA extract and the cloned recombinant plasmid both exhibit the identical amplification characteristics, i.e. amplification efficacy using the same PCR formulation developed in this study. The viral genomic copy (or genomic equivalences, GE) per infectious unit (GE/pfu) of SARS-CoV used in this study was also established to be approximate 1200-1600:1. The assay's detection sensitivity could reach 0.005 pfu or 6-8 GE per assay. It was preliminarily demonstrated that the assay could efficiently detect SARS-CoV from clinical specimens of SARS probable and suspected patients identified in Taiwan. The 3'-NCR based SARS-CoV assay demonstrated 100% diagnostic specificity testing samples of patients with acute respiratory disease from a non-SARS epidemic region.
| S-EPMC7119649 | biostudies-literature