Enabling the future of colonoscopy with intelligent and autonomous magnetic manipulation.
Ontology highlight
ABSTRACT:
SUBMITTER: Martin JW
PROVIDER: S-EPMC7571595 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Diagnostic endoscopy in the gastrointestinal tract has remained largely unchanged for decades and is limited to the visualization of the tissue surface, the collection of biopsy samples for diagnoses, and minor interventions such as clipping or tissue removal. In this work, we present the autonomous servoing of a magnetic capsule robot for in-situ, subsurface diagnostics of microanatomy. We investigated and showed the feasibility of closed-loop magnetic control using digitized microultrasound (μUS) feedback; this is crucial for obtaining robust imaging in an unknown and unconstrained environment. We demonstrated the functionality of an autonomous servoing algorithm that uses μUS feedback, both on benchtop trials as well as in-vivo in a porcine model. We have validated this magnetic-μUS servoing in instances of autonomous linear probe motion and were able to locate markers in an agar phantom with 1.0 ± 0.9 mm position accuracy using a fusion of robot localization and μUS image information. This work demonstrates the feasibility of closed-loop robotic μUS imaging in the bowel without the need for either a rigid physical link between the transducer and extracorporeal tools or complex manual manipulation.
| S-EPMC6677276 | biostudies-literature
Project description:Surgeons perform two primary tasks: operating and engaging patients and caregivers in shared decision-making. Human dexterity and decision-making are biologically limited. Intelligent, autonomous machines have the potential to augment or replace surgeons. Rather than regarding this possibility with denial, ire, or indifference, surgeons should understand and steer these technologies. Closer examination of surgical innovations and lessons learned from the automotive industry can inform this process. Innovations in minimally invasive surgery and surgical decision-making follow classic S-shaped curves with three phases: (1) introduction of a new technology, (2) achievement of a performance advantage relative to existing standards, and (3) arrival at a performance plateau, followed by replacement with an innovation featuring greater machine autonomy and less human influence. There is currently no level I evidence demonstrating improved patient outcomes using intelligent, autonomous machines for performing operations or surgical decision-making tasks. History suggests that if such evidence emerges and if the machines are cost effective, then they will augment or replace humans, initially for simple, common, rote tasks under close human supervision and later for complex tasks with minimal human supervision. This process poses ethical challenges in assigning liability for errors, matching decisions to patient values, and displacing human workers, but may allow surgeons to spend less time gathering and analyzing data and more time interacting with patients and tending to urgent, critical-and potentially more valuable-aspects of patient care. Surgeons should steer these technologies toward optimal patient care and net social benefit using the uniquely human traits of creativity, altruism, and moral deliberation.
| S-EPMC7594619 | biostudies-literature
Project description:Autonomous maze navigation is appealing yet challenging in soft robotics for exploring priori unknown unstructured environments, as it often requires human-like brain that integrates onboard power, sensors, and control for computational intelligence. Here, we report harnessing both geometric and materials intelligence in liquid crystal elastomer-based self-rolling robots for autonomous escaping from complex multichannel mazes without the need for human-like brain. The soft robot powered by environmental thermal energy has asymmetric geometry with hybrid twisted and helical shapes on two ends. Such geometric asymmetry enables built-in active and sustained self-turning capabilities, unlike its symmetric counterparts in either twisted or helical shapes that only demonstrate transient self-turning through untwisting. Combining self-snapping for motion reflection, it shows unique curved zigzag paths to avoid entrapment in its counterparts, which allows for successful self-escaping from various challenging mazes, including mazes on granular terrains, mazes with narrow gaps, and even mazes with in situ changing layouts.
| S-EPMC10491293 | biostudies-literature
Project description:Post-void alarm systems to monitor bedwetting in nocturnal enuresis (NE) have been deemed unsatisfactory. The aim of this study is to develop a safe, comfortable and non-invasive pre-void wearable alarm and associated technologies using advanced mechatronics. Each stage of development includes patient and public involvement and engagement (PPI). The early stages of the development involved children with and without NE (and parents) who were tested at a hospital under the supervision of physicians, radiologists, psychologists, and nurses. The readings of the wearable device were simultaneously compared with B-mode images and measurements, acquired from a conventional ultrasound device, and were found to correlate highly. The results showed that determining imminent voiding need is viable using non-invasive sensors. Following on from "proof of concept," a bespoke advanced mechatronics device has been developed. The device houses custom electronics, an ultrasound system, intelligent software, a user-friendly smartphone application, bedside alarm box, and a dedicated undergarment, along with a self-adhesive gel pad-designed to keep the MEMS sensors aligned with the abdomen. Testing of the device with phantoms and volunteers has been successful in determining bladder volume and associated voiding need. Five miniaturised, and therefore more ergonomic, versions of the device are being developed, with an enabled connection to the cloud platform for location independent control and monitoring. Thereafter, the enhanced device will be tested with children with NE at their homes for 14 weeks, to gain feedback relating to wearability and data collection involving the cloud platform. Graphical Abstract Design of the MyPAD advanced mechatronics system.
| S-EPMC7188739 | biostudies-literature
Project description:Automated manipulation of small particles using external (e.g., magnetic, electric and acoustic) fields has been an emerging technique widely used in different areas. The manipulation typically necessitates a reduced-order physical model characterizing the field-driven motion of particles in a complex environment. Such models are available only for highly idealized settings but are absent for a general scenario of particle manipulation typically involving complex nonlinear processes, which has limited its application. In this work, the authors present a data-driven architecture for controlling particles in microfluidics based on hydrodynamic manipulation. The architecture replaces the difficult-to-derive model by a generally trainable artificial neural network to describe the kinematics of particles, and subsequently identifies the optimal operations to manipulate particles. The authors successfully demonstrate a diverse set of particle manipulations in a numerically emulated microfluidic chamber, including targeted assembly of particles and subsequent navigation of the assembled cluster, simultaneous path planning for multiple particles, and steering one particle through obstacles. The approach achieves both spatial and temporal controllability of high precision for these settings. This achievement revolutionizes automated particle manipulation, showing the potential of data-driven approaches and machine learning in improving microfluidic technologies for enhanced flexibility and intelligence.
| S-EPMC9929134 | biostudies-literature
Project description:Soft robots that can harvest energy from environmental resources for autonomous locomotion is highly desired; however, few are capable of adaptive navigation without human interventions. Here, we report twisting soft robots with embodied physical intelligence for adaptive, intelligent autonomous locomotion in various unstructured environments, without on-board or external controls and human interventions. The soft robots are constructed of twisted thermal-responsive liquid crystal elastomer ribbons with a straight centerline. They can harvest thermal energy from environments to roll on outdoor hard surfaces and challenging granular substrates without slip, including ascending loose sandy slopes, crossing sand ripples, escaping from burying sand, and crossing rocks with additional camouflaging features. The twisting body provides anchoring functionality by burrowing into loose sand. When encountering obstacles, they can either self-turn or self-snap for obstacle negotiation and avoidance. Theoretical models and finite element simulation reveal that such physical intelligence is achieved by spontaneously snapping-through its soft body upon active and adaptive soft body-obstacle interactions. Utilizing this strategy, they can intelligently escape from confined spaces and maze-like obstacle courses without any human intervention. This work presents a de novo design of embodied physical intelligence by harnessing the twisting geometry and snap-through instability for adaptive soft robot-environment interactions.
| S-EPMC9295757 | biostudies-literature
Project description:This describes the application of a visual servo control method to the microrobotic manipulation of polymer beads on a two-dimensional fluid interface. A microrobot, actuated through magnetic fields, is utilized to manipulate a non-magnetic polymer bead into a desired position. The controller utilizes multiple modes of robot actuation to address the different stages of the task. A filtering strategy employed in separation mode allows the robot to spiral from the manipuland in a fashion that promotes the manipulation positioning objective. Experiments demonstrate that our multiphase controller can be used to direct a microrobot to position a manipuland to within an average positional error of approximately 8 pixels (64 µm) over numerous trials.
| S-EPMC7074596 | biostudies-literature
Project description:Unsatisfactory cure rates for the treatment of nocturnal enuresis (NE), i.e. bed-wetting, have led to the need to explore alternative modalities. New treatment methods that focus on preventing enuretic episodes by means of a pre-void alerting system could improve outcomes for children with NE in many aspects. No such technology exists currently to monitor the bladder to alarm before bed-wetting. The aim of this study is to carry out the feasibility of building, refining and evaluating a new, safe, comfortable and non-invasive wearable autonomous intelligent electronic device to monitor the bladder using a single-element low-powered low-frequency ultrasound with the help of Machine Learning techniques and to treat NE by warning the patient at the pre-void stage, enhancing quality of life for these children starting from the first use. The sensitivity and specificity values are 0.89 and 0.93 respectively for determining imminent voiding need. The results indicate that customised imminent voiding need based on the expansion of the bladder can be determined by applying a single-element transducer on a bladder in intermittent manner. The acquired results can be improved further with a comfortable non-invasive device by adding several more features to the current features employed in this pilot study. Graphical Abstract Ultrasound device design: echoed US pulses reflected from the bladder and related tissues around the bladder is detected. These pulses are analysed, and an alarm is triggered when needed to treat nocturnal enuresis.
| S-EPMC6477014 | biostudies-literature
Project description:To compare magnetic imaging-assisted colonoscopy (MIC) with conventional colonoscopy (CC).Magnetic imaging technology provides a computer-generated image of the shape and position of the colonoscope onto a monitor to give visual guidance to the endoscopist. It is designed to improve colonoscopy performance and tolerability for patients by enabling visualization of loop formation and endoscope position. Recently, a new version of MIC technology was developed for which there are limited data.To evaluate this latest generation of MIC among experienced rather than inexperienced or trainee endoscopists, a prospective randomized trial was performed using only gastroenterologists with therapeutic endoscopy training. Consecutive patients undergoing elective outpatient colonoscopy were randomized to MIC or CC, with patients blinded to their group assignment. Endoscopic procedural metrics and quantities of conscious sedation medications were recorded during the procedures. The procedure was classified as "usual" or "difficult" by the endoscopist at the conclusion of each case based on the need for adjunctive maneuvers to facilitate endoscope advancement. After more than one hour post-procedure, patients completed a 10 cm visual analogue pain scale to reflect the degree of discomfort experienced during their colonoscopy. The primary outcome was patient comfort expressed by the visual analogue pain score. Secondary outcomes consisted of endoscopic procedural metrics as well as a sedation score derived from standardized dose increments of the conscious sedation medications.Two hundred fifty-three patients were randomized and underwent MIC or CC between September 2011 and October 2012. The groups were similar in terms of the indications for colonoscopy and patient characteristics. There were no differences in cecal intubation rates (100% vs 99%), insertion distance-to-cecum (82 cm vs 83 cm), time-to-cecum (6.5 min vs 7.2 min), or polyp detection rate (47% vs 52%) between the MIC and CC groups. The primary outcome of mean pain score (1.0 vs 0.9 out of 10, P = 0.41) did not differ between MIC and CC groups, nor did the mean sedation score (8.2 vs 8.5, P = 0.34). Within the subgroup of cases considered more challenging or difficult, time-to-cecum was significantly faster with MIC compared to CC, 10.1 min vs 13.4 min respectively (P = 0.01). Sensitivity analyses confirmed a similar pattern of overall findings when each endoscopist was considered separately, demonstrating that the mean results for the entire group were not unduly influenced by outlier results from any one endoscopist.Although the latest version of MIC resulted in faster times-to-cecum within a subgroup of more challenging cases, overall it was no better than CC in terms of patient comfort, sedation requirements and endoscopic procedural metrics, when performed in experienced hands.
| S-EPMC4177499 | biostudies-literature
Project description:We introduce damage intelligent soft-bodied systems via a network of self-healing light guides for dynamic sensing (SHeaLDS). Exploiting the intrinsic damage resilience of light propagation in an optical waveguide, in combination with a tough, transparent, and autonomously self-healing polyurethane urea elastomer, SHeaLDS enables damage resilient and intelligent robots by self-healing cuts as well as detecting this damage and controlling the robot's actions accordingly. With optimized material and structural design for hyperelastic deformation of the robot and autonomous self-healing capacity, SHeaLDS provides reliable dynamic sensing at large strains (ε = 140%) with no drift or hysteresis, is resistant to punctures, and self-heals from cuts at room temperature with no external intervention. As a demonstration of utility, a soft quadruped protected by SHeaLDS detects and self-heals from extreme damage (e.g., six cuts on one leg) in 1 min and monitors and adapts its gait based on the damage condition autonomously through feedback control.
| S-EPMC9728961 | biostudies-literature