Improving image quality in fast, time-resolved micro-CT by weighted back projection.
Ontology highlight
ABSTRACT:
SUBMITTER: Heyndrickx M
PROVIDER: S-EPMC7581769 | biostudies-literature | 2020 Oct
REPOSITORIES: biostudies-literature
Publications
Improving image quality in fast, time-resolved micro-CT by weighted back projection.
Heyndrickx Marjolein M Bultreys Tom T Goethals Wannes W Van Hoorebeke Luc L Boone Matthieu N MN
Scientific reports 20201022 1
Time-resolved micro-CT is an increasingly powerful technique for studying dynamic processes in materials and structures. However, it is still difficult to study very fast processes with this technique, since fast scanning is typically associated with high image noise levels. We present weighted back projection, a technique applicable in iterative reconstruction methods using two types of prior knowledge: (1) a virtual starting volume resembling the sample, for example obtained from a scan before ...[more]
Similar Datasets
Project description:PurposeTo describe a large, publicly available dataset comprising computed tomography (CT) projection data from patient exams, both at routine clinical doses and simulated lower doses.Acquisition and validation methodsThe library was developed under local ethics committee approval. Projection and image data from 299 clinically performed patient CT exams were archived for three types of clinical exams: noncontrast head CT scans acquired for acute cognitive or motor deficit, low-dose noncontrast chest scans acquired to screen high-risk patients for pulmonary nodules, and contrast-enhanced CT scans of the abdomen acquired to look for metastatic liver lesions. Scans were performed on CT systems from two different CT manufacturers using routine clinical protocols. Projection data were validated by reconstructing the data using several different reconstruction algorithms and through use of the data in the 2016 Low Dose CT Grand Challenge. Reduced dose projection data were simulated for each scan using a validated noise-insertion method. Radiologists marked location and diagnosis for detected pathologies. Reference truth was obtained from the patient medical record, either from histology or subsequent imaging.Data format and usage notesProjection datasets were converted into the previously developed DICOM-CT-PD format, which is an extended DICOM format created to store CT projections and acquisition geometry in a nonproprietary format. Image data are stored in the standard DICOM image format and clinical data in a spreadsheet. Materials are provided to help investigators use the DICOM-CT-PD files, including a dictionary file, data reader, and user manual. The library is publicly available from The Cancer Imaging Archive (https://doi.org/10.7937/9npb-2637).Potential applicationsThis CT data library will facilitate the development and validation of new CT reconstruction and/or denoising algorithms, including those associated with machine learning or artificial intelligence. The provided clinical information allows evaluation of task-based diagnostic performance.
| S-EPMC7985836 | biostudies-literature
Project description:We use dynamic micro-computed tomography (micro-CT) with a high temporal resolution to visualize water penetration through the porous network of immediate-release pharmaceutical solid tablets and characterize dynamic swelling and disintegration mechanisms. We process the micro-CT images using two theoretical scenarios that reflect different paths of pore structure evolution: a scenario where tablet porosity remains constant during the swelling process and a scenario where the tablet porosity progressively diminishes and eventually closes during the swelling process. We calculate the time evolution of the volume of water absorbed by the tablet and, specifically, absorbed by the excipients and the pore structure, as well as the formation and evolution of cracks. In turn, the three-dimensional disintegration pattern of the tablets is reconstructed. Restricting attention to the limiting scenario where tablet porosity is assumed fixed during the swelling process, we couple liquid penetration due to capillary pressure described by the Lucas-Washburn theory with the first-order swelling kinetics of the excipients to provide a physical interpretation of the experimental observations. We estimate model parameters that are in agreement with values reported in the literature, and we demonstrate that water penetration is dominated by intra-particle porosity rather than inter-particle porosity.
| S-EPMC10786181 | biostudies-literature
Project description:ObjectiveTo evaluate the image quality and radiation dose of indirect computed tomographic venography (CTV) using 80 kVp with sinogram-affirmed iterative reconstruction (SAFIRE) and 120 kVp with filtered back projection (FBP).Materials and methodsThis retrospective study was approved by our institution and informed consent was waived. Sixty-one consecutive patients (M: F = 27: 34, mean age 60 ± 16, mean BMI 23.6 ± 3.6 kg/m2) underwent pelvic and lower extremity CTVs [group A (n = 31, 120 kVp, reconstructed with FBP) vs. group B (n = 30, 80 kVp, reconstructed with SAFIRE)]. The vascular enhancement, image noise, contrast-to-noise ratio (CNR), and signal-to-noise ratio (SNR) were compared. Subjective image analysis for image quality and noise was performed by two radiologists. Radiation dose was compared between the two groups.ResultsCompared with group A, higher mean vascular enhancement was observed in the group B (group A vs. B, 118.8 ± 15.7 HU vs. 178.6 ± 39.6 HU, p < 0.001), as well as image noise (12.0 ± 3.8 HU vs. 17.9 ± 6.1 HU, p < 0.001) and CNR (5.1 ± 1.9 vs. 7.6 ± 3.0, p < 0.001). The SNRs were not significantly different in both groups (11.2 ± 4.8 vs. 10.8 ± 3.7, p = 0.617). There was no significant difference in subjective image quality between the two groups (all p > 0.05). The subjective image noise was higher in the group B (p = 0.036 in reader 1, p = 0.005 in reader 2). The inter-observer reliability for assessing subjective image quality was good (ICC 0.746~0.784, p < 0.001). The mean CT dose index volume (CTDIvol) and mean dose length product (DLP) were significantly lower in group B than group A [CTDIvol, 6.4 ± 1.3 vs. 2.2 ± 2.2 mGy (p < 0.001); DLP, 499.1 ± 116.0 vs. 133.1 ± 45.7 mGy × cm (p < 0.001)].ConclusionsCTV using 80 kVp combined with SAFIRE provides lower radiation dose and improved CNR compared to CTV using 120 kVp with FBP.
| S-EPMC5035093 | biostudies-literature
Project description:OBJECTIVE:To evaluate the clinical value of using monochromatic images in spectral CT pulmonary angiography to improve image quality of bronchial arteries. METHODS:We retrospectively analyzed the chest CT images of 38 patients who underwent contrast-enhanced spectral CT. These images included a set of 140kVp polychromatic images and the default 70keV monochromatic images. Using the standard Gemstone Spectral Imaging (GSI) viewer on an advanced workstation (AW4.6,GE Healthcare), an optimal energy level (in keV) for obtaining the best contrast-to-noise ratio (CNR) for the artery could be automatically obtained. The signal-to-noise ratio (SNR), CNR and objective image quality score (1-5) for these 3 image sets (140kVp, 70keV and optimal energy level) were obtained and, statistically compared. The image quality score consistency between the two observers was also evaluated using Kappa test. RESULTS:The optimal energy levels for obtaining the best CNR were 62.58±2.74keV.SNR and CNR from the 140kVp polychromatic, 70keV and optimal keV monochromatic images were (16.44±5.85, 13.24±5.52), (20.79±7.45, 16.69±6.27) and (24.9±9.91, 20.53±8.46), respectively. The corresponding subjective image quality scores were 1.97±0.82, 3.24±0.75, and 4.47±0.60. SNR, CNR and subjective scores had significant difference among groups (all p<0.001). The optimal keV monochromatic images were superior to the 70keV monochromatic and 140kVp polychromatic images, and there was high agreement between the two observers on image quality score (kappa>0.80). CONCLUSIONS:Virtual monochromatic images at approximately 63keV in dual-energy spectral CT pulmonary angiography yielded the best CNR and highest diagnostic confidence for imaging bronchial arteries.
| S-EPMC4788436 | biostudies-other
Project description:To demonstrate the feasibility of reconstructing a cone-beam CT (CBCT) image by deformably altering a prior fan-beam CT (FBCT) image such that it matches the anatomy portrayed in the CBCT projection data set.A prior FBCT image of the patient is assumed to be available as a source image. A CBCT projection data set is obtained and used as a target image set. A parametrized deformation model is applied to the source FBCT image, digitally reconstructed radiographs (DRRs) that emulate the CBCT projection image geometry are calculated and compared to the target CBCT projection data, and the deformation model parameters are adjusted iteratively until the DRRs optimally match the CBCT projection data set. The resulting deformed FBCT image is hypothesized to be an accurate representation of the patient's anatomy imaged by the CBCT system. The process is demonstrated via numerical simulation. A known deformation is applied to a prior FBCT image and used to create a synthetic set of CBCT target projections. The iterative projection matching process is then applied to reconstruct the deformation represented in the synthetic target projections; the reconstructed deformation is then compared to the known deformation. The sensitivity of the process to the number of projections and the DRR/CBCT projection mismatch is explored by systematically adding noise to and perturbing the contrast of the target projections relative to the iterated source DRRs and by reducing the number of projections.When there is no noise or contrast mismatch in the CBCT projection images, a set of 64 projections allows the known deformed CT image to be reconstructed to within a nRMS error of 1% and the known deformation to within a nRMS error of 7%. A CT image nRMS error of less than 4% is maintained at noise levels up to 3% of the mean projection intensity, at which the deformation error is 13%. At 1% noise level, the number of projections can be reduced to 8 while maintaining CT image and deformation errors of less than 4% and 13%, respectively. The method is sensitive to contrast mismatch between the simulated projections and the target projections when the soft-tissue contrast in the projections is low.By using prior knowledge available in a FBCT image, the authors show that a CBCT image can be iteratively reconstructed from a comparatively small number of projection images, thus saving acquisition time and reducing imaging dose. This will enable more frequent daily imaging during radiation therapy. Because the process preserves the CT numbers of the FBCT image, the resulting 3D image intensities will be more accurate than a CBCT image reconstructed via conventional backprojection methods. Reconstruction errors are insensitive to noise at levels beyond what would typically be found in CBCT projection data, but are sensitive to contrast mismatch errors between the CBCT projection data and the DRRs.
| S-EPMC2997812 | biostudies-other
Project description:The limited resolution and lack of spatial information in positron emission tomography (PET) images require the complementary anatomic information from the computed tomography (CT) and/or magnetic resonance imaging (MRI). Therefore, multimodality image fusion techniques such as PET/CT are critical in mapping the functional images to structural images and thus facilitate the interpretation of PET studies. In our experimental situation, the CT and PET images are acquired in separate scanners at different times and the inherent differences in the imaging protocols produce significant nonrigid changes between the two acquisitions in addition to dissimilar image characteristics. The registration conditions are also poor because CT images have artifacts due to the limitation of current scanning settings, while PET images are very blurry (in transmission-PET) and have vague anatomical structure boundaries (in emission-PET).The authors present a new method for whole body small animal multimodal registration. In particular, the authors register whole body rat CT image and PET images using a weighted demons algorithm. The authors use both the transmission-PET and the emission-PET images in the registration process emphasizing particular regions of the moving transmission-PET image using the emission-PET image. After a rigid transformation and a histogram matching between the CT and the transmission-PET images, the authors deformably register the transmission-PET image to the CT image with weights based on the intensity-normalized emission-PET image. For the deformable registration process, the authors develop a weighted demons registration method that can give preferences to particular regions of the input image using a weight image.The authors validate the results with nine rat image sets using the M-Hausdorff distance (M-HD) similarity measure with different outlier-suppression parameters (OSP). In comparison with standard methods such as the regular demons and the normalized mutual information (NMI)-based nonrigid free-form deformation (FFD) registration, the proposed weighted demons registration method shows average M-HD errors: 3.99 ± 1.37 (OSP = 10), 5.04 ± 1.59 (OSP = 20) and 5.92 ± 1.61 (OSP = ∞) with statistical significance (p < 0.0003) respectively, while NMI-based nonrigid FFD has average M-HD errors: 5.74 ± 1.73 (OSP = 10), 7.40 ± 7.84 (OSP = 20) and 9.83 ± 4.13 (OSP = ∞), and the regular demons has average M-HD errors: 6.79 ± 0.83 (OSP = 10), 9.19 ± 2.39 (OSP = 20) and 11.63 ± 3.99 (OSP = ∞), respectively. In addition to M-HD comparisons, the visual comparisons on the faint-edged region between the CT and the aligned PET images also show the encouraging improvements over the other methods.In the whole body multimodal registration between CT and PET images, the utilization of both the transmission-PET and the emission-PET images in the registration process by emphasizing particular regions of the transmission-PET image using an emission-PET image is effective. This method holds promise for other image fusion applications where multiple (more than two) input images should be registered into a single informative image.
| S-EPMC3266828 | biostudies-other
Project description:Purpose/objectiveAlthough radiotherapy is a key component of cancer treatment, its implementation into pre-clinical in vivo models with relatively small target volumes is frequently omitted either due to technical complexity or expected side effects hampering long-term observational studies. We here demonstrate how an affordable industrial micro-CT can be converted into a small animal IGRT device at very low costs. We also demonstrate the proof of principle for the case of partial brain irradiation of mice carrying orthotopic glioblastoma implants.Methods/materialsA commercially available micro-CT originally designed for non-destructive material analysis was used. It consists of a CNC manipulator, a transmission X-ray tube (10-160 kV) and a flat-panel detector, which was used together with custom-made steel collimators (1-5 mm aperture size). For radiation field characterization, an ionization chamber, water-equivalent slab phantoms and radiochromic films were used. A treatment planning tool was implemented using a C++ application. For proof of principle, NOD/SCID/γc(-/-) mice were orthotopically implanted with U87MG high-grade glioma cells and irradiated using the novel setup.ResultsThe overall symmetry of the radiation field at 150 kV was 1.04 ± 0.02%. The flatness was 4.99 ± 0.63% and the penumbra widths were between 0.14 mm and 0.51 mm. The full width at half maximum (FWHM) ranged from 1.97 to 9.99 mm depending on the collimator aperture size. The dose depth curve along the central axis followed a typical shape of keV photons. Dose rates measured were 10.7 mGy/s in 1 mm and 7.6 mGy/s in 5 mm depth (5 mm collimator aperture size). Treatment of mice with a single dose of 10 Gy was tolerated well and resulted in central tumor necrosis consistent with therapeutic efficacy.ConclusionA conventional industrial micro-CT can be easily modified to allow effective small animal IGRT even of critical target volumes such as the brain.
| S-EPMC4438006 | biostudies-literature
Project description:PurposeOptimization studies in digital radiology help to reduce the radiological risk to patients and maximize the benefits associated with their clinical purpose. The aim of this study was to assess the optimization of lateral lumbar spine projection via a combination of exposure parameters adjustments and additional filtration using a sectional anthropomorphic phantom.Materials and methodsWe evaluated the effects of peak voltage, tube loading, and low-cost filters made of copper, titanium, brass, and nickel on both the perceived and physical quality of 125 radiographs obtained in a computer radiography system. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) with their Figure of Merit (FOM), based on the entrance surface air kerma with backscatter (ESAK), was used to assess physical image quality.ResultsThe standard image had a perceived image quality, SNR, FOMSNR, CNR, FOMCNR and ESAK of 3.4, 22.3, 386.4, 23.6, 433.7 and 1.28 mGy, respectively. Copper (90.3% purity) and titanium (95.0% purity) filters reduced ESAK by an average of 60% without compromising diagnostic quality, while brass and nickel filters increased dose under the conditions of the study.ConclusionsOur findings show that optimizing lumbar spine projection can reduce radiation dose without compromising image quality. Low-cost copper and titanium filters can be valuable in resource-limited settings. Further research can explore additional strategies for radiological optimization.
| S-EPMC10481289 | biostudies-literature
Project description:We investigated the effect of deep learning-based image reconstruction (DLIR) compared to iterative reconstruction on image quality in CT pulmonary angiography (CTPA) for suspected pulmonary embolism (PE). For 220 patients with suspected PE, CTPA studies were reconstructed using filtered back projection (FBP), adaptive statistical iterative reconstruction (ASiR-V 30%, 60% and 90%) and DLIR (low, medium and high strength). Contrast-to-noise ratio (CNR) served as the primary parameter of objective image quality. Subgroup analyses were performed for normal weight, overweight and obese individuals. For patients with confirmed PE (n = 40), we further measured PE-specific CNR. Subjective image quality was assessed independently by two experienced radiologists. CNR was lowest for FBP and enhanced with increasing levels of ASiR-V and, even more with increasing strength of DLIR. High strength DLIR resulted in an additional improvement in CNR by 29-67% compared to ASiR-V 90% (p < 0.05). PE-specific CNR increased by 75% compared to ASiR-V 90% (p < 0.05). Subjective image quality was significantly higher for medium and high strength DLIR compared to all other image reconstructions (p < 0.05). In CT pulmonary angiography, DLIR significantly outperforms iterative reconstruction for increasing objective and subjective image quality. This may allow for further reductions in radiation exposure in suspected PE.
| S-EPMC10827738 | biostudies-literature
Project description:Automated analysis of multi-dimensional microscopy images has become an integral part of modern research in life science. Most available algorithms that provide sufficient segmentation quality, however, are infeasible for a large amount of data due to their high complexity. In this contribution we present a fast parallelized segmentation method that is especially suited for the extraction of stained nuclei from microscopy images, e.g., of developing zebrafish embryos. The idea is to transform the input image based on gradient and normal directions in the proximity of detected seed points such that it can be handled by straightforward global thresholding like Otsu's method. We evaluate the quality of the obtained segmentation results on a set of real and simulated benchmark images in 2D and 3D and show the algorithm's superior performance compared to other state-of-the-art algorithms. We achieve an up to ten-fold decrease in processing times, allowing us to process large data sets while still providing reasonable segmentation results.
| S-EPMC3937404 | biostudies-literature