Dataset Information

Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal.

ABSTRACT: This study investigated the adsorption capacities and photocatalytic activities of geopolymer-zeolite composite materials by incorporating different amounts of zeolite and TiO2 in a geopolymer matrix for dye removal. Geopolymers with SiO2/Al2O3 molar ratio of 2.5 were synthesized from metakaolin. The geopolymers containing zeolite and TiO2-doped zeolite exhibited similar behavior in terms of mineral compositions, microstructures and chemical frameworks. The compressive strength of geopolymer-zeolite composite materials decreased with increasing amount of zeolite and TiO2-doped zeolite (0-40 wt%) because of the increase in the porosity of composite materials. The maximum methylene blue adsorption capacity and photocatalytic efficiency of the powdered geopolymer composites with 40 wt% TiO2-doped zeolite was 99.1% and was higher than that of the composites with 40 wt% zeolite without TiO2-doping (92.5%). In addition, the geopolymer composites with TiO2-doped zeolite exhibited excellent stability after repeated usage as photocatalysts. The adsorption capacity and photocatalytic activity of pelletized geopolymer composites decreased because of the reduction in their specific surface area.

SUBMITTER: Pimraksa K

PROVIDER: S-EPMC7598482 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal.

Pimraksa Kedsarin K Setthaya Naruemon N Thala Maneerat M Chindaprasirt Prinya P Murayama Mitsuhiro M

PloS one 20201030 10

This study investigated the adsorption capacities and photocatalytic activities of geopolymer-zeolite composite materials by incorporating different amounts of zeolite and TiO2 in a geopolymer matrix for dye removal. Geopolymers with SiO2/Al2O3 molar ratio of 2.5 were synthesized from metakaolin. The geopolymers containing zeolite and TiO2-doped zeolite exhibited similar behavior in terms of mineral compositions, microstructures and chemical frameworks. The compressive strength of geopolymer-zeo ...[more]

PMID: 33125419

Similar Datasets

Project description:The excess presence of phosphate(V) ions in the biosphere is one of the most serious problems that negatively affect aqueous biocenosis. Thus, phosphates(V) separation is considered to be important for sustainable development. In the presented study, an original cerium(IV)-modified chitosan-based hydrogel (Ce-CTS) was developed using the chemical co-precipitation method and then used as an adsorbent for efficient removal of phosphate(V) ions from their aqueous solutions. From the scientific point of view, it represents a completely new physicochemical system. It was found that the adsorptive removal of phosphate(V) anions by the Ce-CTS adsorbent exceeded 98% efficiency which is ca. 4-times higher compared with the chitosan-based hydrogel without any modification (non-cross-linked CTS). The best result of the adsorption capacity of phosphates(V) on the Ce-CTS adsorbent, equal to 71.6 mg/g, was a result of adsorption from a solution with an initial phosphate(V) concentration 9.76 mg/dm3 and pH 7, an adsorbent dose of 1 g/dm3, temperature 20 °C. The equilibrium interphase distribution data for the Ce-CTS adsorbent and aqueous solution of phosphates(V) agreed with the theoretical Redlich-Peterson and Hill adsorption isotherm models. From the kinetic point of view, the pseudo-second-order model explained the phosphates(V) adsorption rate for Ce-CTS adsorbent the best. The specific effect of porous structure of adsorbent influencing the diffusional mass transfer resistances was identified using Weber-Morris kinetic model. The thermodynamic study showed that the process was exothermic and the adsorption ran spontaneously. Modification of CTS with cerium(IV) resulted in the significant enhancement of the chitosan properties towards both physical adsorption (an increase of the point of zero charge of adsorbent), and chemical adsorption (through the presence of Ce(IV) that demonstrates a chemical affinity for phosphate(V) anions). The elaborated and experimentally verified highly effective adsorbent can be successfully applied to uptake phosphates(V) from aqueous systems. The Ce-CTS adsorbent is stable in the conditions of the adsorption process, no changes in the adsorbent structure or leaching of the inorganic filling were observed.

Project description:Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Dataset Information

Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal.

Publications

Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets