Dataset Information

Close Packing of Cellulose and Chitosan in Regenerated Cellulose Fibers Improves Carbon Yield and Structural Properties of Respective Carbon Fibers.

ABSTRACT: A low carbon yield is a major limitation for the use of cellulose-based filaments as carbon fiber precursors. The present study aims to investigate the use of an abundant biopolymer chitosan as a natural charring agent particularly on enhancing the carbon yield of the cellulose-derived carbon fiber. The ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH]OAc) was used for direct dissolution of cellulose and chitosan and to spin cellulose-chitosan composite fibers through a dry-jet wet spinning process (Ioncell). The homogenous distribution and tight packing of cellulose and chitosan revealed by X-ray scattering experiments enable a synergistic interaction between the two polymers during the pyrolysis reaction, resulting in a substantial increase of the carbon yield and preservation of mechanical properties of cellulose fiber compared to other cobiopolymers such as lignin and xylan.

SUBMITTER: Zahra H

PROVIDER: S-EPMC7608939 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Close Packing of Cellulose and Chitosan in Regenerated Cellulose Fibers Improves Carbon Yield and Structural Properties of Respective Carbon Fibers.

Zahra Hilda H Sawada Daisuke D Guizani Chamseddine C Ma Yibo Y Kumagai Shogo S Yoshioka Toshiaki T Sixta Herbert H Hummel Michael M

Biomacromolecules 20200917 10

A low carbon yield is a major limitation for the use of cellulose-based filaments as carbon fiber precursors. The present study aims to investigate the use of an abundant biopolymer chitosan as a natural charring agent particularly on enhancing the carbon yield of the cellulose-derived carbon fiber. The ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH]OAc) was used for direct dissolution of cellulose and chitosan and to spin cellulose-chitosan composite fibers through a dry-jet wet ...[more]

PMID: 32870661

Similar Datasets

Project description:Cellulose can be dissolved with another biopolymer in a protic ionic liquid and spun into a bicomponent hybrid cellulose fiber using the Ioncell® technology. Inside the hybrid fibers, the biopolymers are mixed at the nanoscale, and the second biopolymer provides the produced hybrid fiber new functional properties that can be fine-tuned by controlling its share in the fiber. In the present work, we present a fast and quantitative thermoanalytical method for the compositional analysis of man-made hybrid cellulose fibers by using thermogravimetric analysis (TGA) in combination with chemometrics. First, we incorporated 0-46 wt.% of lignin or chitosan in the hybrid fibers. Then, we analyzed their thermal decomposition behavior in a TGA device following a simple, one-hour thermal treatment protocol. With an analogy to spectroscopy, we show that the derivative thermogram can be used as a predictor in a multivariate regression model for determining the share of lignin or chitosan in the cellulose hybrid fibers. The method generated cross validation errors in the range 1.5-2.1 wt.% for lignin and chitosan. In addition, we discuss how the multivariate regression outperforms more common modeling methods such as those based on thermogram deconvolution or on linear superposition of reference thermograms. Moreover, we highlight the versatility of this thermoanalytical method-which could be applied to a wide range of composite materials, provided that their components can be thermally resolved-and illustrate it with an additional example on the measurement of polyester content in cellulose and polyester fiber blends. The method could predict the polyester content in the cellulose-polyester fiber blends with a cross validation error of 1.94 wt.% in the range of 0-100 wt.%. Finally, we give a list of recommendations on good experimental and modeling practices for the readers who want to extend the application of this thermoanalytical method to other composite materials.Supplementary informationThe online version contains supplementary material available at 10.1007/s10570-021-03923-6.

Project description:Extremely high mechanical performance spun bionanocomposite fibers of chitosan (CHI), and cellulose nanofibers (CNFs) were successfully achieved by gel spinning of CHI aqueous viscous formulations filled with CNFs. The microstructural characterization of the fibers by X-ray diffraction revealed the crystallization of the CHI polymer chains into anhydrous chitosan allomorph. The spinning process combining acidic-basic-neutralization-stretching-drying steps allowed obtaining CHI/CNF composite fibers of high crystallinity, with enhanced effect at incorporating the CNFs. Chitosan crystallization seems to be promoted by the presence of cellulose nanofibers, serving as nucleation sites for the growing of CHI crystals. Moreover, the preferential orientation of both CNFs and CHI crystals along the spun fiber direction was revealed in the two-dimensional X-ray diffraction patterns. By increasing the CNF amount up to the optimum concentration of 0.4 wt % in the viscous CHI/CNF collodion, Young's modulus of the spun fibers significantly increased up to 8 GPa. Similarly, the stress at break and the yield stress drastically increased from 115 to 163 MPa, and from 67 to 119 MPa, respectively, by adding only 0.4 wt % of CNFs into a collodion solution containing 4 wt % of chitosan. The toughness of the CHI-based fibers thereby increased from 5 to 9 MJ.m-3. For higher CNFs contents like 0.5 wt %, the high mechanical performance of the CHI/CNF composite fibers was still observed, but with a slight worsening of the mechanical parameters, which may be related to a minor disruption of the CHI matrix hydrogel network constituting the collodion and gel fiber, as precursor state for the dry fiber formation. Finally, the rheological behavior observed for the different CHI/CNF viscous collodions and the obtained structural, thermal and mechanical properties results revealed an optimum matrix/filler compatibility and interface when adding 0.4 wt % of nanofibrillated cellulose (CNF) into 4 wt % CHI formulations, yielding functional bionanocomposite fibers of outstanding mechanical properties.

Dataset Information

Close Packing of Cellulose and Chitosan in Regenerated Cellulose Fibers Improves Carbon Yield and Structural Properties of Respective Carbon Fibers.

Publications

Close Packing of Cellulose and Chitosan in Regenerated Cellulose Fibers Improves Carbon Yield and Structural Properties of Respective Carbon Fibers.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets