Dataset Information

In-situ spatial and temporal electrical characterization of ZnO thin films deposited by atmospheric pressure chemical vapour deposition on flexible polymer substrates.

ABSTRACT: A technique is presented for collecting data on both the spatial and temporal variations in the electrical properties of a film as it is deposited on a flexible substrate. A flexible printed circuit board substrate with parallel electrodes distributed across its surface was designed. Zinc oxide films were then deposited on the flexible substrate at different temperatures via atmospheric pressure chemical vapour deposition (AP-CVD) using a spatial atomic layer deposition system. AP-CVD is a promising high-throughput thin film deposition technique with applications in flexible electronics. Collecting data on the film properties in-situ allows us to directly observe how deposition conditions affect the evolution of those properties in real-time. The spatial uniformity of the growing film was monitored, and the various stages of film nucleation and growth on the polymer substrate were observed. The measured resistance of the films was observed to be very high until a critical amount of material has been deposited, consistent with Volmer-Weber growth. Furthermore, monitoring the film resistance during post-deposition cooling enabled immediate identification of metallic or semiconducting behaviour within the conductive ZnO films. This technique allows for a more complete understanding of metal chalcogen film growth and properties, and the high volume of data generated will be useful for future implementations of machine-learning directed materials science.

SUBMITTER: Jones A

PROVIDER: S-EPMC7672091 | biostudies-literature | 2020 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

In-situ spatial and temporal electrical characterization of ZnO thin films deposited by atmospheric pressure chemical vapour deposition on flexible polymer substrates.

Jones Alexander A Mistry Kissan K Kao Manfred M Shahin Ahmed A Yavuz Mustafa M Musselman Kevin P KP

Scientific reports 20201117 1

A technique is presented for collecting data on both the spatial and temporal variations in the electrical properties of a film as it is deposited on a flexible substrate. A flexible printed circuit board substrate with parallel electrodes distributed across its surface was designed. Zinc oxide films were then deposited on the flexible substrate at different temperatures via atmospheric pressure chemical vapour deposition (AP-CVD) using a spatial atomic layer deposition system. AP-CVD is a promi ...[more]

PMID: 33203953

Similar Datasets

Project description:This work reports the ellipsometry analysis of atomic layer deposition (ALD) films of ZnO doped with Zr to determine parameters like free carrier concentration and mobility. Thin films of zinc oxide (ZnO) and Zr-doped ZnO of thickness ∼100 nm were prepared by atomic layer deposition on sapphire, SiO2/Si(100), and Si(100) substrates. Variable-angle spectroscopic ellipsometry was used to study their optical properties in the 0.5-3.5 eV spectral range. The optical constants were accurately obtained using a model that combines Drude and Tauc-Lorentz oscillators with Bruggeman effective medium approximations, allowing the inclusion of a roughness layer in the optical model. The effect of Zr doping (ca. 1.9-4.4 atom %) was then investigated in both as-prepared samples and samples annealed in the temperature range of 100-300 °C. All of the films exhibited good optical transparency (ca. 70-90% in the visible region). For doping levels below 2.7 atom %, the real part of the dielectric permittivity reveals a semiconductor-to-metal transition in the near-infrared (NIR) region, as the permittivity goes from positive to negative. Besides, the plasma energy increases with increasing Zr concentration, and both resistivity and carrier concentration exhibit slightly parabolic behaviors, with a minimum of ∼1.5 × 10-3 Ω cm and a maximum of 2.4 × 1020 cm-3, respectively, at the same critical Zr concentration (2.7 atom %). In contrast, the carrier mobility decreases rapidly from 76.0 to 19.2 cm2/(V s) with increasing Zr content, while conductivities and carrier mobilities worsen when the annealing temperature increases, probably due to the segregation of ZnO crystals. Finally, the optical band gap is very stable, revealing its interesting independence of substrate composition and annealing temperature, as it collapses to a single master curve when band gap energy is plotted versus free carrier concentration, following the Burstein-Moss effect. Overall, the Zr-doped ZnO films studied here would be a highly desirable system for developing thermally stable transparent conductive oxides (TCOs).

Dataset Information

In-situ spatial and temporal electrical characterization of ZnO thin films deposited by atmospheric pressure chemical vapour deposition on flexible polymer substrates.

Publications

In-situ spatial and temporal electrical characterization of ZnO thin films deposited by atmospheric pressure chemical vapour deposition on flexible polymer substrates.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets