Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enrichment of bovine X-sperm using microfluidic dielectrophoretic chip: A proof-of- concept study.

ABSTRACT: The microfluidic dielectrophoretic (MF-DEP) chip is a new, economical and readily-available technology that might be used to enrich X-sperm for increasing female offspring in dairy farms. In this study, we sought to develop an MF-DEP chip to enrich X bovine sperm. The MF-DEP chip was composed of an electrode attached to a glass slide and a microchannel made from polydimethylsiloxane. Sex-sorted sperm from flow cytometry were used to identify optimal electric field conditions while unsorted sperm were later tested for sorting efficiency. The results show that during dielectrophoresis some sperm attached to the electrode (called positive DEP; pDEP) whereas other moved away from the electrode (called negative DEP; nDEP). X and Y-sperm responded to dielectrophoresis differently depending on various factors such as buffers, voltages, and frequencies. We found that the condition 4 V 1 MHz significantly reduced (P < 0.05) the percentage of Y-sperm to nearly 30 and therefore enriched X-sperm. The sorting efficiency was dependent on buffer, bull, sorting cycle, flow rate, electrical voltage, and frequency. Notably, the best sorting buffer found in this experiment was the conducting buffer, but this buffer significantly reduced sperm viability and motility. Other sperm-friendly buffers, TRIS and mHTF, were also used, but could not enrich X-sperm. In conclusion, this is a proof of concept that the MF-DEP chip can be effectively used to enrich bovine X-sperm. However, more research must be performed particularly to find the best sorting buffer to effectively sex-sort sperm while providing high motility and sperm viability.

SUBMITTER: Wongtawan T

PROVIDER: S-EPMC7672294 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Exploring kidney allograft rejection: A proof-of-concept study using spatial transcriptomics

Project description:In this proof-of-concept study, spatial transcriptomics combined with public single-cell RNA sequencing data were used to explore the potential of this technology to study kidney allograft rejection. We aimed to map gene expression patterns within diverse pathological states by examining biopsies classified across non-rejection, T cell-mediated acute rejection, and interstitial fibrosis and tubular atrophy (IFTA). Our results revealed distinct immune cell signatures, including those of T and B lymphocytes, monocytes, mast cells, and plasma cells, and their spatial organization within the renal interstitium. We also mapped chemokine receptors and ligands to study immune-cell migration and recruitment. Finally, our analysis demonstrated differential spatial enrichment of transcription signatures associated with kidney allograft rejection across various biopsy regions. Interstitium regions displayed higher enrichment scores for rejection-associated gene expression patterns than did tubular areas, which had negative scores. This implies that these signatures are primarily driven by processes unfolding in the renal interstitium. Overall, this study highlights the value of spatial transcriptomics for revealing cellular heterogeneity and immune signatures in renal transplant biopsies, and demonstrates its potential for studying the molecular and cellular mechanisms associated with rejection. However, certain limitations must be borne in mind regarding the development and future applications of this technology.

2024-05-02 | GSE245870 | GEO

On-chip isolation and enrichment of circulating cell-free DNA using microfluidic device.

Project description:Circulating cell-free DNA (cfDNA), containing cancer-specific DNAs derived from tumor cells, plays an important role in real-time monitoring of disease progression. Due to the abnormal growth of cancer and the promotion of cancer cell apoptosis by chemotherapy, the higher cfDNA concentration than healthy individuals is closely correlated with the diagnosis and treatment of cancer. Also, the mutation detection in tumor cell-derived cfDNA can be used to predict tumor progression. Human blood contains many blood cells (red blood cells, white blood cells, and platelets), proteins, extracellular vesicles, and so on. These blood components act as the inhibitors when the cfDNA is analyzed using polymerase chain reaction. So, analysis of cfDNA using whole blood directly may affect the sensitivity of the analysis or result in false-negative. The conventional methods of cfDNA isolation, such as silica absorption and polymer-mediated enrichment, are labor-intensive and time-consuming processes that can also lead to the loss of cfDNA in cumbersome procedures. Here, we designed an integrated microfluidic chip capable of on-chip cfDNA extracting to reduce sample loss and processing time. Our proposed device minimizes the number of experimental steps from 5 to 1, the total processing time from 42 to 19?min, and the required volume of washing reagents from 2 to 0.4?ml for cfDNA enrichment compared to the conventional method.

| S-EPMC6491348 | biostudies-literature

A novel microfluidic chip-based sperm-sorting device constructed using design of experiment method.

Project description:Microfluidics is proposed as a technique for efficient sperm sorting, to achieve the ultimate goal of resolving infertility problems in livestock industry. Our study aimed to design a microfluidic sperm-sorting device (SSD) through a high-efficacy and cost- and time-effective fabrication process, by using COMSOL Multiphysics simulation and modeling software, and the design of experiment (DOE) method. The eight factors affecting SSD performance were established. The simulation was then run, and statistically significant factors were analyzed. Minitab16 was used to optimize the design modulus factor. By setting the statistical significance at p < 0.05, the factors affecting experimental structure were analyzed. At a desirability of 97.99, the optimal parameters for the microfluidic chip were: angle between sperm and medium inlet chambers (A = 43°), sperm inlet flow rate (B = 0.24 µL min-1), medium inlet flow rate (C = 0.34 µL min-1), and inlet and outlet chamber lengths (D = 5000 µm). These optima were then applied to microfluidics device construction. The device was produced using soft lithographic microfabrication techniques and tested on Holstein-Friesian bull sperm. The highest bull sperm-sorting performance for this microfluidic device prototype was 96%. The error between the simulation and the actual microfluidic device was 2.72%. Fluid viscosity ranges analysis-based simulations revealed acceptable fluid viscosity tolerances for the SSD. The simulation results revealed that the acceptable tolerance range for fluid viscosity was 0.00001-0.003 kg m-1 s-1. This optimally designed microfluidic chip-based SSD may be integrated into sperm x/y separation micro devices.

| S-EPMC7553928 | biostudies-literature

Molecular phenotyping empowers drug discovery: a proof-of-concept study

Project description:Today, novel candidate therapeutics are identified in an environment which is intrinsically different from the clinical context in which they are ultimately evaluated. We present a strategy that allows biological relevance to be assessed in the early stages of drug discovery. Using molecular phenotyping and an in vitro model of diabetic cardiomyopathy, we show that by quantifying pathway reporter gene expression, molecular phenotyping can cluster compounds based on pathway profiles and dissect associations between pathway activities and disease phenotypes simultaneously. Molecular phenotyping identified a class of calcium-signaling modulators that can reverse disease-regulated pathways and phenotypes, which was validated by structurally distinct compounds of relevant classes. The technique was applicable to compounds with a range of binding specificities and detected false-positive hits missed by classical phenotypic assays. Our results advocate application of molecular phenotyping in drug discovery, promoting biological relevance as a key selection criterion early in the drug development cascade.

2017-05-24 | GSE89972 | GEO

Non-Linear Cellular Dielectrophoretic Behavior Characterization Using Dielectrophoretic Tweezers-Based Force Spectroscopy inside a Microfluidic Device.

Project description:Characterization of cellular dielectrophoretic (DEP) behaviors, when cells are exposed to an alternating current (AC) electric field of varying frequency, is fundamentally important to many applications using dielectrophoresis. However, to date, that characterization has been performed with monotonically increasing or decreasing frequency, not with successive increases and decreases, even though cells might behave differently with those frequency modulations due to the nonlinear cellular electrodynamic responses reported in previous works. In this report, we present a method to trace the behaviors of numerous cells simultaneously at the single-cell level in a simple, robust manner using dielectrophoretic tweezers-based force spectroscopy. Using this method, the behaviors of more than 150 cells were traced in a single environment at the same time, while a modulated DEP force acted upon them, resulting in characterization of nonlinear DEP cellular behaviors and generation of different cross-over frequencies in living cells by modulating the DEP force. This study demonstrated that living cells can have non-linear di-polarized responses depending on the modulation direction of the applied frequency as well as providing a simple and reliable platform from which to measure a cellular cross-over frequency and characterize its nonlinear property.

| S-EPMC6210972 | biostudies-literature

Microfluidic dielectrophoretic sorter using gel vertical electrodes.

Project description:We report the development and results of a two-step method for sorting cells and small particles in a microfluidic device. This approach uses a single microfluidic channel that has (1) a microfabricated sieve which efficiently focuses particles into a thin stream, followed by (2) a dielectrophoresis (DEP) section consisting of electrodes along the channel walls for efficient continuous sorting based on dielectric properties of the particles. For our demonstration, the device was constructed of polydimethylsiloxane, bonded to a glass surface, and conductive agarose gel electrodes. Gold traces were used to make electrical connections to the conductive gel. The device had several novel features that aided performance of the sorting. These included a sieving structure that performed continuous displacement of particles into a single stream within the microfluidic channel (improving the performance of downstream DEP, and avoiding the need for additional focusing flow inlets), and DEP electrodes that were the full height of the microfluidic walls ("vertical electrodes"), allowing for improved formation and control of electric field gradients in the microfluidic device. The device was used to sort polymer particles and HeLa cells, demonstrating that this unique combination provides improved capability for continuous DEP sorting of particles in a microfluidic device.

| S-EPMC4032422 | biostudies-other

Proof of concept: Pull down assay using bovine serum albumin and an immunomodulator small molecule.

Project description:In the past decade, there has been increasing interest in use of small molecules for immunomodulation. The affinity-based pull-down purification is an essential tool for target identification of small molecules and drug discovery. This study presents our recent efforts to investigate the cellular target(s) of Compound A, a small molecule with demonstrated immunomodulatory properties in human peripheral blood mononuclear cells (PBMCs). While we have previously observed the immunomodulatory activity of Compound A in PBMCs, the specific molecular targets underlying its effects remains elusive. To address this challenge, we synthesized a trifluoromethyl phenyl diazirine (TPD)-bearing trifunctional Probe 1 based on the chemical structure of Compound A, which could be used in a pull-down assay to efficiently bind to putative cellular targets via photoaffinity labelling. In this report, we utilized bovine serum albumin (BSA) as a model protein to establish a proof-of-concept in order to assess the suitability of Probe 1 for binding to an endogenous target. By the successful synthesis of Probe 1 and demonstrating the efficient binding of Probe 1 to BSA, we propose that this method can be used as a tool for further identification of potential protein targets of small molecules in living cells. Our findings provide a valuable starting point for further investigations into the molecular mechanisms underlying the immunomodulatory effects of Compound A.

| S-EPMC10651465 | biostudies-literature

Analysis of pairwise cell interactions using an integrated dielectrophoretic-microfluidic system.

Project description:Blood vessel formation, during either normal vascular reconstruction or pathogenic tumour formation, relies upon highly organized cell-cell interactions. Isolating the function of any particular component of this cell-cell communication is often difficult, given the vast complexity of communication networks in multicellular systems. One way to address this problem is to analyse cell-cell communication on the most elementary scale--cell pairs. Here, we describe an integrated dielectrophoretic (DEP)-microfluidic device allowing for such analysis. Single cancer and endothelial cells (ECs) and cell pairs were patterned using DEP force and cultured within a minimally stressful microfluidic channel network. Controlling both the initial cell positions and extracellular environment, we investigated cell motility in homo- and heterotypic cell pairs under diverse conditions. We found that secreted collagen IV and soluble vascular endothelial growth factor have considerable guidance effect on ECs at the level of two interacting cells. Cell interaction rules extracted from the experiments of cell pairs were used to mathematically predict branching patterns characteristic of developing multicellular blood vessels. This integrative analysis method can be extended to other systems involving complex multicellular interactions.

| S-EPMC2615303 | biostudies-literature

Proof-of-Concept Method to Study Uncharacterized Methyltransferases Using PRDM15.

Project description:The PRDM family of methyltransferases has been implicated in cellular proliferation and differentiation and is deregulated in human diseases, most notably in cancer. PRDMs are related to the SET domain family of methyltransferases; however, from the 19 PRDMs only a few PRDMs with defined enzymatic activities are known. PRDM15 is an uncharacterized transcriptional regulator, with significant structural disorder and lack of defined small-molecule binding pockets. Many aspects of PRDM15 are yet unknown, including its structure, substrates, reaction mechanism, and its methylation profile. Here, we employ a series of computational approaches for an exploratory investigation of its potential substrates and reaction mechanism. Using the knowledge of PRDM9 and current knowledge of PRDM15 as basis, we tried to identify genuine substrates of PRDM15. We start from histone-based peptides and learn that the native substrates of PRDM15 may be non-histone proteins. In the future, a combination of sequence-based approaches and signature motif analysis may provide new leads. In summary, our results provide new information about the uncharacterized methyltransferase, PRDM15.

| S-EPMC9861158 | biostudies-literature

Enrichment and detection of Escherichia coli O157:H7 from water samples using an antibody modified microfluidic chip.

Project description:Low abundant (<100 cells mL(-1)) E. coli O157:H7 cells were isolated and enriched from environmental water samples using a microfluidic chip. The poly(methylmethacrylate), PMMA, chip contained 8 devices, each equipped with 16 curvilinear high aspect ratio channels that were covalently decorated with polyclonal anti-O157 antibodies (pAb) and could search for rare cells through a pAb mediated process. The chip could process independently 8 different samples or one sample using 8 different parallel inputs to increase volume processing throughput. After cell enrichment, cells were released and enumerated using benchtop real-time quantitative polymerase chain reaction (PCR), targeting genes which effectively discriminated the O157:H7 serotype from other nonpathogenic bacteria. The recovery of target cells from water samples was determined to be approximately 72%, and the limit-of-detection was found to be 6 colony forming units (cfu) using the slt1 gene as a reporter. We subsequently performed analysis of lake and wastewater samples. The simplicity in manufacturing and ease of operation makes this device attractive for the selection of pathogenic species from a variety of water supplies suspected of containing bacterial pathogens at extremely low frequencies.

| S-EPMC2859668 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data