Dataset Information

Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation.

ABSTRACT: High-performance lightweight materials are urgently needed, given the pressing quest for weight reduction and the associated energy savings and emission reduction. Here, by incorporating the multi-principal element feature of compositionally complex alloys, we develop the concept of lightweight steels further and propose a new class of compositionally complex steels (CCSs). This approach allows us to use the high solid solution strengthening and shift the alloys' compositions into previously unattainable phase regions where both nanosized shearable ?-carbides and non-shearable B2 particles are simultaneously formed. The achievement of dual-nanoprecipitation in our CCSs leads to materials with ultrahigh specific tensile strength (up to 260 MPa·cm3 g-1) and excellent tensile elongation (13 to 38%), a combination outperforming all other high-strength high-entropy alloys and advanced lightweight steels. Our concept of CCSs is thus useful for guiding the design of ultrastrong lightweight metallic materials.

SUBMITTER: Wang Z

PROVIDER: S-EPMC7673736 | biostudies-literature | 2020 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation.

Wang Zhangwei Z Lu Wenjun W Zhao Huan H Liebscher Christian H CH He Junyang J Ponge Dirk D Raabe Dierk D Li Zhiming Z

Science advances 20201113 46

High-performance lightweight materials are urgently needed, given the pressing quest for weight reduction and the associated energy savings and emission reduction. Here, by incorporating the multi-principal element feature of compositionally complex alloys, we develop the concept of lightweight steels further and propose a new class of compositionally complex steels (CCSs). This approach allows us to use the high solid solution strengthening and shift the alloys' compositions into previously una ...[more]

PMID: 33188015

Similar Datasets

Project description:High Al Low-density steels could have a transformative effect on the light-weighting of steel structures for transportation. They can achieve the desired properties with the minimum amount of Ni, and thus are of great interest from an economic perspective. In this study, the mechanical properties of two duplex low-density steels, Fe-15Mn-10Al-0.8C-5Ni and Fe-15Mn-10Al-0.8?C (wt.%) were investigated through nano-indentation and simulation through utilization of ab-initio formalisms in Density Functional Theory (DFT) in order to establish the hardness resulting from two critical structural features (?-carbides and B2 intermetallic) as a function of annealing temperature (500-1050?°C) and the addition of Ni. In the Ni-free sample, the calculated elastic properties of ?-carbides were compared with those of the B2 intermetallic Fe3Al-L12 and the role of Mn in the ? structure and its elastic properties were studied. The Ni-containing samples were found to have a higher hardness due to the B2 phase composition being NiAl rather than FeAl, with Ni-Al bonds reported to be stronger than the Fe-Al bonds. In both samples, at temperatures of 900?°C and above, the ferrite phase contained nano-sized discs of B2 phase, wherein the Ni-containing samples exhibited higher hardness, attributed again to the stronger Ni-Al bonds in the B2 phase. At 700?°C and below, the nano-sized B2 discs were replaced by micrometre sized needles of ? in the Ni-free sample resulting in a lowering of the hardness. In the Ni-containing sample, the entire ? phase was replaced by B2 stringers, which had a lower hardness than the Ni-Al nano-discs due to a lower Ni content in B2 stringer bands formed at 700?°C and below. In addition, the hardness of needle-like ?-carbides formed in ? phase was found to be a function of Mn content. Although it was impossible to measure the hardness of cuboid ? particles in ? phase because of their nano-size, the hardness value of composite phases, e.g. ??+?? was measured and reported. All the hardness values were compared and rationalized by bonding energy between different atoms.

Project description:Tomato disease image recognition plays a crucial role in agricultural production. Today, while machine vision methods based on deep learning have achieved some success in disease recognition, they still face several challenges. These include issues such as imbalanced datasets, unclear disease features, small inter-class differences, and large intra-class variations. To address these challenges, this paper proposes a method for classifying and recognizing tomato leaf diseases based on machine vision. First, to enhance the disease feature details in images, a piecewise linear transformation method is used for image enhancement, and oversampling is employed to expand the dataset, compensating for the imbalanced dataset. Next, this paper introduces a convolutional block with a dual attention mechanism called DAC Block, which is used to construct a lightweight model named LDAMNet. The DAC Block innovatively uses Hybrid Channel Attention (HCA) and Coordinate Attention (CSA) to process channel information and spatial information of input images respectively, enhancing the model's feature extraction capabilities. Additionally, this paper proposes a Robust Cross-Entropy (RCE) loss function that is robust to noisy labels, aimed at reducing the impact of noisy labels on the LDAMNet model during training. Experimental results show that this method achieves an average recognition accuracy of 98.71% on the tomato disease dataset, effectively retaining disease information in images and capturing disease areas. Furthermore, the method also demonstrates strong recognition capabilities on rice crop disease datasets, indicating good generalization performance and the ability to function effectively in disease recognition across different crops. The research findings of this paper provide new ideas and methods for the field of crop disease recognition. However, future research needs to further optimize the model's structure and computational efficiency, and validate its application effects in more practical scenarios.

Dataset Information

Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation.

Publications

Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets