Dataset Information

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

ABSTRACT: During the last two decades, there has been a sharp increase in both interest and knowledge about the coronary microcirculation. Since these small vessels are not visible by the human eye, physiologic measurements should be used to characterize their function. The invasive methods presently used (coronary flow reserve (CFR) and index of microvascular resistance (IMR)) are operator-dependent and mandate the use of adenosine to induce hyperemia. In recent years, a new thermodilution-based method for measurement of absolute coronary blood flow and microvascular resistance has been proposed and initial procedural problems have been overcome. Presently, the technique is easy to perform using the Rayflow infusion catheter and the Coroventis software. The method is accurate, reproducible, and completely operator-independent. This method has been validated noninvasively against the current golden standard for flow assessment: Positron Emission Tomography-Computed Tomography (PET-CT). In addition, absolute flow and resistance measurements have proved to be safe, both periprocedurally and at long-term follow-up. With an increasing number of studies being performed, this method has great potential for better understanding and quantification of microvascular disease.

SUBMITTER: Keulards DCJ

PROVIDER: S-EPMC7688370 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

Keulards Daniëlle C J DCJ El Farissi Mohamed M Tonino Pim A L PAL Teeuwen Koen K Vlaar Pieter-Jan PJ van Hagen Eduard E Wijnbergen Inge F IF de Vos Annemiek A Brueren Guus R G GRG Van't Veer Marcel M Pijls Nico H J NHJ

Journal of interventional cardiology 20201117

During the last two decades, there has been a sharp increase in both interest and knowledge about the coronary microcirculation. Since these small vessels are not visible by the human eye, physiologic measurements should be used to characterize their function. The invasive methods presently used (coronary flow reserve (CFR) and index of microvascular resistance (IMR)) are operator-dependent and mandate the use of adenosine to induce hyperemia. In recent years, a new thermodilution-based method f ...[more]

PMID: 33293902

Similar Datasets

Project description:AimsIschaemic heart disease is the reduction of myocardial blood flow, caused by epicardial and/or microvascular disease. Both are common and prognostically important conditions, with distinct guideline-indicated management. Fractional flow reserve (FFR) is the current gold-standard assessment of epicardial coronary disease but is only a surrogate of flow and only predicts percentage flow changes. It cannot assess absolute (volumetric) flow or microvascular disease. The aim of this study was to develop and validate a novel method that predicts absolute coronary blood flow and microvascular resistance (MVR) in the catheter laboratory.Methods and resultsA computational fluid dynamics (CFD) model was used to predict absolute coronary flow (QCFD) and coronary MVR using data from routine invasive angiography and pressure-wire assessment. QCFD was validated in an in vitro flow circuit which incorporated patient-specific, three-dimensional printed coronary arteries; and then in vivo, in patients with coronary disease. In vitro, QCFD agreed closely with the experimental flow over all flow rates [bias +2.08 mL/min; 95% confidence interval (error range) -4.7 to +8.8 mL/min; R2 = 0.999, P < 0.001; variability coefficient <1%]. In vivo, QCFD and MVR were successfully computed in all 40 patients under baseline and hyperaemic conditions, from which coronary flow reserve (CFR) was also calculated. QCFD-derived CFR correlated closely with pressure-derived CFR (R2 = 0.92, P < 0.001). This novel method was significantly more accurate than Doppler-wire-derived flow both in vitro (±6.7 vs. ±34 mL/min) and in vivo (±0.9 vs. ±24.4 mmHg).ConclusionsAbsolute coronary flow and MVR can be determined alongside FFR, in absolute units, during routine catheter laboratory assessment, without the need for additional catheters, wires or drug infusions. Using this novel method, epicardial and microvascular disease can be discriminated and quantified. This comprehensive coronary physiological assessment may enable a new level of patient stratification and management.

Project description:ObjectivesThe aim of this study was to compare Doppler flow velocity and thermodilution-derived indexes and to determine the optimal thermodilution-based diagnostic thresholds for coronary flow reserve (CFR).BackgroundThe majority of clinical data and diagnostic thresholds for flow-based indexes are derived from Doppler measurements, and correspondence with thermodilution-derived indices remain unclear.MethodsAn international multicenter registry was conducted among patients who had coronary flow measurements using both Doppler and thermodilution techniques in the same vessel and during the same procedure.ResultsPhysiological data from 250 vessels (in 149 patients) were included in the study. A modest correlation was found between thermodilution-derived CFR (CFRthermo) and Doppler-derived CFR (CFRDoppler) (r2 = 0.36; P < 0.0001). CFRthermo overestimated CFRDoppler (mean 2.59 ± 1.46 vs 2.05 ± 0.89; P < 0.0001; mean bias 0.59 ± 1.24 by Bland-Altman analysis), the relationship being described by the equation CFRthermo = 1.04 × CFRDoppler + 0.50. The commonly used dichotomous CFRthermo threshold of 2.0 had poor sensitivity at predicting a CFRDoppler value <2.5. The optimal CFRthermo threshold was 2.5 (sensitivity 75.54%, specificity 81.25%). There was only a weak correlation between hyperemic microvascular resistance and index of microvascular resistance (r2 = 0.19; P < 0.0001), due largely to variation in the measurement of flow by each modality. Forty-four percent of patients were discordantly classified as having abnormal microvascular resistance by hyperemic microvascular resistance (≥2.5 mm Hg · cm-1 · s) and index of microvascular resistance (≥25).ConclusionsCFR calculated by thermodilution overestimates Doppler-derived CFR, while both parameters show modest correlation. The commonly used CFRthermo threshold of 2.0 has poor sensitivity for identifying vessels with diminished CFR, but using the same binary diagnostic threshold as for Doppler (<2.5) yields reasonable diagnostic accuracy. There was only a weak correlation between microvascular resistance indexes assessed by the 2 modalities.

Project description:Background Invasive measures of microvascular resistance in the culprit coronary artery have potential for risk stratification in acute ST-segment-elevation myocardial infarction. We aimed to investigate the pathological and prognostic significance of coronary thermodilution waveforms using a diagnostic guidewire. Methods and Results Coronary thermodilution was measured at the end of percutaneous coronary intervention, (PCI) and contrast-enhanced cardiac magnetic resonance imaging (MRI) was intended on day 2 and 6 months later to assess left ventricular (LV) function and pathology. All-cause death or first heart failure hospitalization was a pre-specified outcome (median follow-up duration 1469 days). Thermodilution recordings underwent core laboratory assessment. A total of 278 patients with acute ST-segment elevation myocardial infarction EMI (72% male, 59±11 years) had coronary thermodilution measurements classified as narrow unimodal (n=143 [51%]), wide unimodal (n=100 [36%]), or bimodal (n=35 [13%]). Microvascular obstruction and myocardial hemorrhage were associated with the thermodilution waveform pattern ( P=0.007 and 0.011, respectively), and both pathologies were more prevalent in patients with a bimodal morphology. On multivariate analysis with baseline characteristics, thermodilution waveform status was a multivariable associate of microvascular obstruction (odds ratio [95% confidence interval]=5.29 [1.73, 16.22];, P=0.004) and myocardial hemorrhage (3.45 [1.16, 10.26]; P=0.026), but the relationship was not significant when index of microvascular resistance (IMR) >40 or change in index of microvascular resistance (5 per unit) was included. However, a bimodal thermodilution waveform was independently associated with all-cause death and hospitalization for heart failure (odds ratio [95% confidence interval]=2.70 [1.10, 6.63]; P=0.031), independent of index of microvascular resistance>40, ST-segment resolution, and TIMI (Thrombolysis in Myocardial Infarction) Myocardial Perfusion Grade. Conclusions The thermodilution waveform in the culprit coronary artery is a biomarker of prognosis and may be useful for risk stratification immediately after reperfusion therapy.

Dataset Information

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

Publications

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets