Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

“Turn-On” Fluorescent Biosensors for High Selective and Sensitive Detection of Al3+ Ion

ABSTRACT: A series of new compounds (1-4) based on pyrrole hydrazone Schiff bases were designed and synthesized. The interactions of these new compounds with metal ions and their fluorescent recognition were investigated. All compounds showed “turn-on” fluorescence in the presence of Al3+ in aqueous solution. Their sensing behaviors with Al3+ were studied using photophysical experiments, ESI-MS spectrometry analysis, 1H NMR titration, and DFT calculation. The detection limits of 1-4 for the analysis of Al3+ were found to reach a 10?8 M level in aqueous solution, which are far lower than the WHO guidelines for drinking water (7.41 mM for Al3+). A high selectivity test paper has been fabricated for Al3+ detection based on sensor 3. Theoretical calculations (DFT) have been carried out to elucidate the configuration of 1-4 and their Al complexes and rationalize experimental absorption data.

SUBMITTER: Wang P

PROVIDER: S-EPMC7711066 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Highly Selective Perylenediimide-Based Chemosensor: "Naked-Eye" Colorimetric and Fluorescent Turn-On Recognition for Al3.

Project description:A novel "turn-on" fluorescent probe (PCN) was designed, synthesized, and characterized with perylene tetracarboxylic disimide as the fluorophore and Schiff base subunit as the metal ion receptor. The probe demonstrated a considerable fluorescence enhancement in the presence of Al3+ in DMF with high selectivity and sensitivity. Furthermore, the considerably "off-on" fluorescence response simultaneously led to the apparent color change from colorless to brilliant yellow, which could also be identified by naked eye easily. The sensing capability of PCN to Al3+ was evaluated by the changes in ultraviolet-visible, fluorescence, Fourier transform-infrared, proton nuclear magnetic resonance, and high-resolution mass spectrometry spectroscopies. The linear concentration range for Al3+ was 0-63 μM with a detection limit of 0.16 μM, which allowed for the quantitative determination of Al3+.

| S-EPMC7516037 | biostudies-literature

Anthracene-Based Highly Selective and Sensitive Fluorescent "Turn-on" Chemodosimeter for Hg2.

Project description:Three π-extended anthracene-bearing thioacetals (1-3) have been synthesized, and their fluorescence "turn-on" responses to Hg2+ ions are studied. The chemodosimetric fluorescence-sensing behavior and their resulting hydrolysis via a desulfurization reaction mechanism leads to the formation of highly fluorescent respective aldehyde substitutions. Furthermore, this mechanism was supported by increase in the quantum yields of their resulting aldehydes and is correlated to their molecular substitution. The chemosensors 1-3 have exhibited to be promising receptors toward Hg2+ ions in the presence of other competitive metal ions. Moreover, the detection limits of 1-3 have been found to be in the nanomolar range (94, 59, and 235, respectively). Fluorescence microscopic imaging studies show that 1-2 have been found to be effective for fluorescence imaging in live cells. Moreover, compounds 1-3 act as potential candidates for the detection of Hg2+ in environmental and biological systems as well as real samples.

| S-EPMC6217515 | biostudies-literature

Sulfhydryl functionalized carbon quantum dots as a turn-off fluorescent probe for sensitive detection of Hg2.

Project description:Mercury ion (Hg2+) is one of the most toxic heavy metal ions and lowering the detection limit of Hg2+ is always a challenge in analytical chemistry and environmental analysis. In this work, sulfhydryl functionalized carbon quantum dots (HS-CQDs) were synthesized through a one-pot hydrothermal method. The obtained HS-CQDs were able to detect mercury ions Hg2+ rapidly and sensitively through fluorescence quenching, which may be ascribed to the formation of nonfluorescent ground-state complexes and electron transfer reaction between HS-CQDs and Hg2+. A modification of the HS-CQD surface by -SH was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The HS-CQDs sensing system obtained a good linear relationship over a Hg2+ concentration ranging from 0.45 μM to 2.1 μM with a detection limit of 12 nM. Delightfully, the sensor has been successfully used to detect Hg2+ in real samples with satisfactory results. This means that the sensor has the potential to be used for testing actual samples.

| S-EPMC9043377 | biostudies-literature

A multi-functional chemosensor for highly selective ratiometric fluorescent detection of silver(I) ion and dual turn-on fluorescent and colorimetric detection of sulfide.

Project description:A multi-functional chemosensor 1 as silver and sulfide detector was synthesized by the combination of octopamine and 4-dimethylaminocinnamaldehyde. Sensor 1 exhibited a ratiometric fluorescence emission for Ag+ from blue to sky. The binding mode of 1 and Ag+ turned out to be a 1?:?1 ratio as determined using Job plot and electrospray ionization (ESI) mass spectral analyses. The sensing mechanism of 1 with silver ion was unravelled by 1H NMR titrations and theoretical calculations. Sensor 1 also discerned sulfide by enhancing fluorescence intensity and changing colour from yellow to colourless in aqueous solution. The sensing properties of 1 toward S2- were investigated by using ESI-mass analysis, Job plot and 1H NMR titrations. Moreover, 1 could be used as a detector for sulfide in a wide pH range.

| S-EPMC6030272 | biostudies-literature

A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc.

Project description:A novel turn-on fluorescence probe L has been designed that exhibits high selectivity and sensitivity with a detection limit of 9.53 × 10-8 mol/L for the quantification of Zn2+. 1H-NMR spectroscopy and single crystal X-ray diffraction analysis revealed the unsymmetrical nature of the structure of the Schiff base probe L. An emission titration experiment in the presence of different molar fractions of Zn2+ was used to perform a Job's plot analysis. The results showed that the stoichiometric ratio of the complex formed by L and Zn2+ was 1:1. Moreover, the molecular structure of the mononuclear Cu complex reveals one ligand L coordinates with one Cu atom in the asymmetric unit. On adding CuCl2 to the ZnCl2/L system, a Cu-Zn complex was formed and a strong quenching behavior was observed, which inferred that the Cu2+ displaced Zn2+ to coordinate with the imine nitrogen atoms and hydroxyl oxygen atoms of probe L.

| S-EPMC8270291 | biostudies-literature

A Turn-On Fluorescent Chemosensor for Cyanide Ion Detection in Real Water Samples

Project description:We have designed and synthesized a novel simple colorimetric fluorescent probe with aggregation-induced emission (AIE) properties. Probe 5-(4-(diphenylamine)phenyl) thiophen-2-formaldehyde W exhibited a turn-on fluorescent response to cyanide ion (CN−), which induces distinct visual color changes. Probe W exhibited a highly selective and sensitive ratiometric fluorescence response for the detection of CN− over a wide pH range (4–11) and in the presence of common interferents. The linear detection of CN− over the concentration range of 4.00–38.00 µM (R2 = 0.9916, RSD = 0.02) was monitored by UV-Vis absorption spectrometry (UV-Vis) with the limit of detection determined to be 0.48 µM. The linear detection of CN− over the concentration range of 8.00–38.00 µM was examined by fluorescence spectrophotometry (R2 = 0.99086, RSD = 0.031), and the detection limit was found to be 68.00 nM. The sensing mechanisms were confirmed by 1H NMR spectroscopic titrations, X-ray crystallographic analysis, and HRMS. Importantly, probe W was found to show rapid response, high selectivity, and sensitivity for cyanide anions in real water samples, over the range of 100.17∼100.86% in artificial lake water and 100.54∼101.64% in running water by UV-Vis absorption spectrometry, and over the range of 99.42∼100.71% in artificial lake water and 100.59∼101.17% in running water by fluorescence spectrophotometry. Importantly, this work provides a simple and effective approach which uses an economically cheap and uncomplicated synthetic route for the selective, sensitive, and quantitative detection of CN− ions in systems relevant to the environment and health.

| S-EPMC9339681 | biostudies-literature

A novel and fast responsive turn-on fluorescent probe for the highly selective detection of Cd2+ based on photo-induced electron transfer.

Project description:A novel, highly sensitive and fast responsive turn-on fluorescence probe, 2,2'-((1E,1'E)-((1,10-phenanthroline-2,9-diyl)bis(methanylylidene)) bis(azanylylidene)) diphenol (ADMPA), for Cd2+ was successfully developed based on 2,9-dimethyl-1,10-phenanthroline and o-aminophenol. ADMPA showed a remarkable fluorescence enhancement toward Cd2+ against other competing cations, owing to the suppression of the photo-induced electron transfer (PET) and CH[double bond, length as m-dash]N isomerization. A good linear relationship (R 2 = 0.9960) was obtained between the emission intensity of ADMPA and the concentration of Cd2+ (0.25-2.5 μM) with a detection limit of 29.3 nM, which was much lower than that reported in literature. The binding stoichiometry between ADMPA and Cd2+ was 2 : 1 as confirmed by the Job's Plot method, which was further confirmed by a 1H NMR titration experiment. Moreover, the ADMPA probe was successfully applied to detect Cd2+ in real water samples with a quick response time of only 6.6 s, which was about 3-40 times faster than the reported cadmium ion probe.

| S-EPMC9074931 | biostudies-literature

A Highly Selective and Sensitive Fluorescent Turn-Off Probe for Cu2+ Based on a Guanidine Derivative.

Project description:A new highly selective and sensitive fluorescent probe for Cu2+, N-n-butyl-4-(1'-cyclooctene-1',3',6'-triazole)-1,8-naphthalimide (L), was synthesized and evaluated. The structure of compound L was characterized via IR, ¹H-NMR, 13C-NMR and HRMS. The fluorescent probe was quenched by Cu2+ with a 1:1 binding ratio and behaved as a "turn-off" sensor. An efficient and sensitive spectrofluorometric method was developed for detecting and estimating trace levels of Cu2+ in EtOH/H?O. The ligand exhibited excitation and emission maxima at 447 and 518 nm, respectively. The equilibrium binding constant of the ligand with Cu2+ was 1.57 × 10? M-1, as calculated using the Stern.

| S-EPMC6151758 | biostudies-literature

Fabrication of a Hydrazone-Based Al(III)-Selective "Turn-On" Fluorescent Chemosensor and Ensuing Potential Recognition of Picric Acid.

Project description:A hydrazone-based N'1,N'3-bis((E)-4-(diethylamino)-2 -hydroxybenzylidene)isophthalohydrazide (NDHIPH), has been synthesized, characterized, and assessed for its highly selective and sensitive (limit of detection, 2.53 nM) response toward Al(III) via fluorescence enhancement in 95% aqueous medium. All experimental results of analytical studies are in good consonance with the theoretical studies performed. Further, this NDHIPH-Al(III) ensemble is used for selective and sensitive (12.15 nM) detection of explosive picric acid (PA) via fluorescence quenching. This reversible behavior of NDHIPH toward Al(III) and PA is used for the creation of a molecular logic gate.

| S-EPMC6854579 | biostudies-literature

A Highly Selective and Sensitive Turn-On Fluorescent Chemosensor Based on Rhodamine 6G for Iron(III).

Project description:Recently, more and more rhodamine derivatives have been used as fluorophores to construct sensors due to their excellent spectroscopic properties. A rhodamine-based fluorescent and colorimetric Fe(3+) chemosensor 3',6'-bis(ethylamino)-2-acetoxyl-2',7'-dimethyl-spiro[1H-isoindole-1,9'-[9H]xanthen]-3(2H)-one (RAE) was designed and synthesized. Upon the addition of Fe(3+), the dramatic enhancement of both fluorescence and absorbance intensity, as well as the color change of the solution, could be observed. The detection limit of RAE for Fe(3+) was around 7.98 ppb. Common coexistent metal ions showed little or no interference in the detection of Fe(3+). Moreover, the addition of CN(-) could quench the fluorescence of the acetonitrile solution of RAE and Fe(3+), indicating the regeneration of the chemosensor RAE. The robust nature of the sensor was shown by the detection of Fe(3+) even after repeated rounds of quenching. As iron is a ubiquitous metal in cells and plays vital roles in many biological processes, this chemosensor could be developed to have applications in biological studies.

| S-EPMC4280826 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data