Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al³.

ABSTRACT: A luminescent coordination polymer with the overall formula {[Zn(tr₂btd)(bpdc)]∙DMF}_n (where tr₂btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr₂btd)(bpdc)]∙DMF}_n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al³⁺ solution. Fluorescence titration experiments were carried out and the detection limit for Al³⁺ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr₂btd)(bpdc)]∙DMF}_n is a promising probe for sensitive fluorescent Al³⁺ detection.

SUBMITTER: Pavlov DI

PROVIDER: S-EPMC8658932 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fluorescent and Catalytic Properties of a 2D Lamellar Zn Metal-Organic Framework with sql Network Structure.

Project description:A two-dimensional (2D) lamellar Zn metal-organic framework (Zn-MOF, 1) with a fluorescent 1,6-di(pyridin-3-yl)pyrene (3-DPPy) and 1,4-benzenedicarboxylate (BDC2-) bridging linkers was prepared and structurally characterized. The chemical formula of 1 is [Zn(μ-3-DPPy)(μ-BDC)]n. The mononuclear Zn(II) ion, acting as a node, is tetrahedrally coordinated with two 3-DPPy and two BDC linkers. The coordination environment of Zn(II) is a distorted tetrahedral geometry. The Zn-MOF is the sql network structure based on topology analysis. The undulated 2D sheets of 1 tightly pack together to form a lamellar structure. The pyrene moieties are parallelly oriented to each other. The Zn-MOF is not porous, possibly because the mononuclear Zn(II) node did not form cluster-based secondary building units due to the less symmetric 3-DPPy. The steady-state fluorescence measurements indicate that the fluorescence signal of the 1 is slightly blue-shifted compared to the free 3-DPPy in the solid state. The excimer emission band at 463 nm for crystalline 3-DPPy is shifted to 447 nm for 1. The value of 447 nm is also a blue-shift value compared to nonsubstituted pyrene crystals (470 nm). Despite its nonporosity, the surface Lewis acidic sites of 1 could catalyze the transesterification of esters. Surface defect sites are responsible for this catalytic activity.

| S-EPMC10488886 | biostudies-literature

A Zn(II) Coordination Polymer for Fluorescent Turn-Off Selective Sensing of Heavy Metal Cation and Toxic Inorganic Anions

Project description: Not available

| S-EPMC11206703 | biostudies-literature

Synthesis of Zn-based 1D and 2D coordination polymer nanoparticles in block copolymer micelles.

Project description:Nanoparticles of the 1D and 2D coordination polymers [Zn(OAc)2(bipy)] n and [Zn(TFA)2(bppa)2] n were prepared, employing polystyrene-block-poly(4-vinylpyridine) diblock copolymers with different weight fractions of the 4-vinylpyridine (4VP) block and comparable overall molecular weights of M n ≈ 155 kg mol-1 as template (SV-15 and SV-42 with 15 and 42 wt% 4VP, respectively). [Zn(OAc)2(bipy)] n nanoparticles were successfully synthesised within the 4VP core of SV-42 micelles, showing a core size of D core = 47 ± 5 nm and a hydrodynamic diameter of D h = 157 ± 46 nm, determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The crystallinity of the composite is quite low, showing only low intensity reflexes in the powder X-ray diffraction (PXRD) pattern with the highest particle load. No indications for larger microcrystals were detected by scanning electron microscopy (SEM), proving the successful integration of the coordination polymer nanoparticles within the micellar cores. Nanocomposites of the 2D coordination network [Zn(TFA)2(bppa)2] n were synthesised using both diblock copolymers. The particle core sizes (from TEM) and hydrodynamic diameters (from DLS) correlate with the 4VP fraction of the micelles, resulting in D core = 46 ± 6 nm for SV-42 and 15 ± 2 nm for SV-15 and D h = 340 ± 153 nm and 177 ± 57 nm, respectively. The successful synthesis was proven by PXRD and SEM images, confirming the absence of larger crystallites. Hence, it is possible to synthesise nanocomposites of Zn-based 1D and 2D coordination polymers by a direct approach utilizing diblock copolymer micelles as template.

| S-EPMC9418959 | biostudies-literature

A metal-free turn-on fluorescent probe for the fast and sensitive detection of inorganic azides.

Project description:Sodium azide is toxic and widely used in agricultural, commercial products, and research laboratories. Thus it is of a significant environmental concern and there is a need for the development of a rapid detection method. A fluorogenic dibenzylcyclooctyne derivative (Fl-DIBO) is herein described as a fluorescent probe for the rapid detection of inorganic azide via Strain-Promoted Azide-Alkyne Cycloaddition (SPAAC). Fl-DIBO was found to be highly selective toward NaN3 in comparison to other common anions with good sensitivity and detection limit of 10?M.

| S-EPMC4797929 | biostudies-literature

A Highly Selective and Sensitive Fluorescent Turn-Off Probe for Cu2+ Based on a Guanidine Derivative.

Project description:A new highly selective and sensitive fluorescent probe for Cu2+, N-n-butyl-4-(1'-cyclooctene-1',3',6'-triazole)-1,8-naphthalimide (L), was synthesized and evaluated. The structure of compound L was characterized via IR, ¹H-NMR, 13C-NMR and HRMS. The fluorescent probe was quenched by Cu2+ with a 1:1 binding ratio and behaved as a "turn-off" sensor. An efficient and sensitive spectrofluorometric method was developed for detecting and estimating trace levels of Cu2+ in EtOH/H₂O. The ligand exhibited excitation and emission maxima at 447 and 518 nm, respectively. The equilibrium binding constant of the ligand with Cu2+ was 1.57 × 10⁴ M-1, as calculated using the Stern.

| S-EPMC6151758 | biostudies-literature

Three Novel Zn-Based Coordination Polymers: Synthesis, Structure, and Effective Detection of Al3+ and S2- Ions.

Project description:Three novel Zn-based coordination polymers (CPs), [Zn(MIPA)]n (1), {[Zn(MIPA)(4,4'-bipy)0.5(H2O)]·1.5H2O}n (2), and {[Zn(MIPA)(bpe)]·H2O}n (3) (MIPA = 4-methoxyisophthalic acid, 4,4'-bipy = 4,4'-bipyridine, bpe = (E)-1,2-di(pyridine-4-yl)ethane), were constructed by ligand 4-methoxyisophthalic acid under solvothermal conditions. Compound 1 features a beaded 2D-layer architecture, while compound 2 presents a 2-fold interpenetrating structure with a uninodal three-connected hcb topology. Compound 3 has a 3-fold interpenetrated four-connected dmp topology. Photoluminescence investigations of compound 2 were explored in detail, by which ions were detected, and it was observed to have the highest quenching efficiency toward Al3+ and S2- ions. The possible fluorescence quenching mechanisms of 2 toward Al3+ and S2- ions were also explored. To the best of our knowledge, this is the first potential dual-responsive luminescent probe based on a Zn(II) coordination polymer for detecting Al3+ and S2- ions via a luminescence quenching effect in ethanol.

| S-EPMC7024230 | biostudies-literature

A "Turn-On" fluorescent probe for sensitive and selective detection of fluoride ions based on aggregation-induced emission.

Project description:Based on the fluorophore of 2-(2'-hydroxyphenyl)benzothiazole (HBT) with aggregation-induced emission (AIE) properties, a highly selective and sensitive fluorescent probe PBT towards F- was investigated. "Turn-On" fluorescence type signaling was realized by employing fluoride-selective cleavage of the latent thiophosphinated probe in mixed aqueous media. The probe is designed in such a way that the excited state intramolecular proton transfer (ESIPT) of the HBT moiety becomes blocked. The chemodosimetric approach of F- to the probe results in the recovery of the ESIPT by removal of a free AIE-active HBT moiety through a subsequent hydrolysis process. The F- detection limit of the probe was 3.8 nM in the dynamic range of 0.5 μM to 10 μM. In addition, the proposed probe has been used to detect F- in water samples and toothpaste samples with satisfying results.

| S-EPMC9086254 | biostudies-literature

Two colorimetric fluorescent turn-on chemosensors for detection of Al3+ and N3 - : Synthesis, photophysical and computational studies.

Project description:Two new rhodamine derivative L1 and L2 bearing 2-methoxy-1-naphthaldehyde and 5-bromo-3-methoxy salicylaldehyde units were designed and synthesized using microwave-assisted organic synthesis and utilized towards sequential fluorescence detection of aluminum ion (Al3+ ) and azide (N3 - ) in aqueous acetonitrile solution. Aluminum ion (Al3+ ) triggers the formation of highly fluorescent ring-open spirolactam. The fluorescence and colorimetric response of the L1 -Al3+ and L2 -Al3+ complexes were quenched by the addition of N3 - , which extracting the Al3+ from the complexes and turn-off the sensors, confirming that the recognition process is reversible. The recognition ability of the sensors was investigated by fluorescence titration, Job's plot, 1 H-NMR spectroscopy and density functional theory (DFT) calculations.

| S-EPMC6727853 | biostudies-literature

A Turn-On Fluorescent Probe for Sensitive Detection of Cysteine in a Fully Aqueous Environment and in Living Cells.

Project description:We reported here a turn-on fluorescent probe (1) for the detection of cysteine (Cys) by incorporating the recognition unit of 2,4-dinitrobenzenesulfonyl ester (DNBS) to a coumarin derivative. The structure of the obtained probe was confirmed by NMR and HRMS techniques. The probe shows a remarkable fluorescence off-on response (?52-fold) by the reaction with Cys in 100% aqueous buffer. The sensing mechanism was verified by the HPLC test. Probe 1 also displays high selectivity towards Cys. The detection limit was calculated to be 23?nM. Moreover, cellular experiments demonstrated that the probe is highly biocompatible and can be used for monitoring intracellular Cys.

| S-EPMC6311829 | biostudies-literature

Sulfhydryl functionalized carbon quantum dots as a turn-off fluorescent probe for sensitive detection of Hg<sup>2</sup>.

Project description:Mercury ion (Hg2+) is one of the most toxic heavy metal ions and lowering the detection limit of Hg2+ is always a challenge in analytical chemistry and environmental analysis. In this work, sulfhydryl functionalized carbon quantum dots (HS-CQDs) were synthesized through a one-pot hydrothermal method. The obtained HS-CQDs were able to detect mercury ions Hg2+ rapidly and sensitively through fluorescence quenching, which may be ascribed to the formation of nonfluorescent ground-state complexes and electron transfer reaction between HS-CQDs and Hg2+. A modification of the HS-CQD surface by -SH was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The HS-CQDs sensing system obtained a good linear relationship over a Hg2+ concentration ranging from 0.45 μM to 2.1 μM with a detection limit of 12 nM. Delightfully, the sensor has been successfully used to detect Hg2+ in real samples with satisfactory results. This means that the sensor has the potential to be used for testing actual samples.

| S-EPMC9043377 | biostudies-literature