Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and evaluation of Fe₃O₄-impregnated activated carbon for dioxin removal.

ABSTRACT: Polychlorinated dibenzo-p-dioxins and -furans (PCDD/PCDFs) are highly toxic organic pollutants in soils and sediments which persist over timescales that extend from decades to centuries. There is a growing need to develop effective technologies for remediating PCDD/Fs-contaminated soils and sediments to protect human and ecosystem health. The use of sorbent amendments to sequester PCDD/Fs has emerged as one promising technology. A synthesis method is described here to create a magnetic activated carbon composite (AC-Fe₃O₄) for dioxin removal and sampling that could be recovered from soils using magnetic separation. Six AC-Fe₃O₄ composites were evaluated (five granular ACs (GACs) and one fine-textured powder AC(PAC)) for their magnetization and ability to sequester dibenzo-p-dioxin (DD). Both GAC/PAC and GAC/PAC-Fe₃O₄ composites effectively removed DD from aqueous solution. The sorption affinity of DD for GAC-Fe₃O₄ was slightly reduced compared to GAC alone, which is attributed to the blocking of sorption sites. The magnetization of a GAC-Fe₃O₄ composite reached 5.38 emu/g based on SQUID results, allowing the adsorbent to be easily separated from aqueous solution using an external magnetic field. Similarly, a fine-textured PAC-Fe₃O₄ composite was synthesized with a magnetization of 9.3 emu/g.

SUBMITTER: Tu YJ

PROVIDER: S-EPMC7733032 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Removal of hydrogen sulfide from a biogas mimic by using impregnated activated carbon adsorbent.

Project description:Adsorption technology has led to the development of promising techniques to purify biogas, i.e., biomethane or biohydrogen. Such techniques mainly depend on the adsorbent ability and operating parameters. This research focused on adsorption technology for upgrading biogas technique by developing a novel adsorbent. The commercial coconut shell activated carbon (CAC) and two types of gases (H2S/N2 and H2S/N2/CO2) were used. CAC was modified by copper sulfate (CuSO4), zinc acetate (ZnAc2), potassium hydroxide (KOH), potassium iodide (KI), and sodium carbonate (Na2CO3) on their surface to increase the selectivity of H2S removal. Commercial H2S adsorbents were soaked in 7 wt.% of impregnated solution for 30 min before drying at 120°C for 24 h. The synthesized adsorbent's physical and chemical properties, including surface morphology, porosity, and structures, were characterized by SEM-EDX, FTIR, XRD, TGA, and BET analyses. For real applications, the modified adsorbents were used in a real-time 0.85 L single-column adsorber unit. The operating parameters for the H2S adsorption in the adsorber unit varied in L/D ratio (0.5-2.5) and feed flow rate (1.5-5.5 L/min) where, also equivalent with a gas hourly space velocity, GHSV (212.4-780.0 hour-1) used. The performances of H2S adsorption were then compared with those of the best adsorbent that can be used for further investigation. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties (i.e., crystallinity and surface area). BET analysis further shows that the modified adsorbents surface area decreased by up to 96%. Hence, ZnAc2-CAC clarify as the best adsorption capacity ranging within 1.3-1.7 mg H2S/g, whereby the studied extended to adsorption-desorption cycle.

| S-EPMC6372171 | biostudies-literature

Efficient As(III) Removal by Novel MoS2-Impregnated Fe-Oxide-Biochar Composites: Characterization and Mechanisms.

Project description:Sorbents that efficiently eliminate toxic metal(loid)s from industrial wastes are required for the protection of the environment and human health. Therefore, we demonstrated efficient As(III) removal by novel, eco-friendly, hydrothermally prepared MoS2-impregnated FeO x @BC800 (MSF@BC800). The properties and adsorption mechanism of the material were investigated by X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The synergistic effects of FeO x and MoS2 on MSF@BC800 considerably enhanced As(III)-removal efficiency to ?99.73% and facilitated superior As(III) affinity in aqueous solutions (K d ? 105 mL g-1) compared to those of FeO x @BC800 and MS@BC800, which showed 37.07 and 17.86% As(III)-removal efficiencies and K d = 589 and 217 mL g-1, respectively, for an initial As(III) concentration of ?10 mg L-1. The maximum Langmuir As(III) sorption capacity of MSF@BC800 was 28.4 mg g-1. Oxidation of As(III) to As(V) occurred on the MSF@BC800 composite surfaces. Adsorption results agreed with those obtained from the Freundlich and pseudo-second-order models, suggesting multilayer coverage and chemisorption, respectively. Additionally, MSF@BC800 characteristics were examined under different reaction conditions, with temperature, pH, ionic strength, and humic acid concentration being varied. The results indicated that MSF@BC800 has considerable potential as an eco-friendly environmental remediation and As(III)-decontamination material.

| S-EPMC7288705 | biostudies-literature

Photocatalytic NOx removal with TiO2-impregnated 3D-printed PET supports.

Project description:In this work, we investigated the photocatalytic removal of NOx using 3D-printed supports. Monolithic supports with internal channels were fabricated by Fused Modelling Deposition (FDM) using PET as the filament feedstock. The printing parameters of the supports were optimized to maximize the exposure of the photocatalyst to UV light throughout the monolithic PET printed supports. The removal experiments were carried out in a continuous gas phase flow reactor, which was custom designed in-house incorporating a 3D printed PET support impregnated with TiO2 as photocatalyst. The impregnated and non-impregnated supports were characterized by diffuse reflectance spectrometry, SEM and AFM. The effect of several key-factors on the NOx removal capacity was investigated, including the type of PET filament (native recycled, BPET vs. glycol-modified, PETG), the type of TiO2 (P25 vs. Hombikat UV-100), the UV light source (LED vs. tubular lamps), and the number of deposited TiO2 layers. The highest NO and NOx removal were achieved by using PETG supports coated with a single layer of Hombikat UV-100 and irradiating the flat reactor from both sides using two sets of black light lamps. However, the highest selectivity toward nitrate formation was obtained when using P25 under the same experimental conditions. This work demonstrates that 3D printing is a reliable and powerful technique for fabricating photocatalytic reactive supports that can serve as a versatile platform for evaluating photocatalytic performance.

| S-EPMC10724678 | biostudies-literature

Synthesis of activated carbon from biowaste of fir bark for methylene blue removal.

Project description:Activated carbon (AC) was successfully prepared from low-cost forestry fir bark (FB) waste using KOH activation method. Morphology and texture properties of ACFB were studied by scanning and high-resolution transmission electron microscopies (SEM and HRTEM), respectively. The resulting fir bark-based activated carbon (ACFB) demonstrated high surface area (1552 m2 g-1) and pore volume (0.84 cm3 g-1), both of which reflect excellent potential adsorption properties of ACFB towards methylene blue (MB). The effect of various factors, such as pH, initial concentration, adsorbent content as well as adsorption duration, was studied individually. Adsorption isotherms of MB were fitted using all three nonlinear models (Freundlich, Langmuir and Tempkin). The best fitting of MB adsorption results was obtained using Freundlich and Temkin. Experimental results showed that kinetics of MB adsorption by our ACFB adsorbent followed pseudo-second-order model. The maximum adsorption capacity obtained was 330 mg g-1, which indicated that FB is an excellent raw material for low-cost production of AC suitable for cationic dye removal.

| S-EPMC6774956 | biostudies-literature

Bio-Derived Hierarchical Multicore-Shell Fe2N-Nanoparticle-Impregnated N-Doped Carbon Nanofiber Bundles: A Host Material for Lithium-/Potassium-Ion Storage.

Project description:Despite the significant progress in the fabrication of advanced electrode materials, complex control strategies and tedious processing are often involved for most targeted materials to tailor their compositions, morphologies, and chemistries. Inspired by the unique geometric structures of natural biomacromolecules together with their high affinities for metal species, we propose the use of skin collagen fibers for the template crafting of a novel multicore-shell Fe2N-carbon framework anode configuration, composed of hierarchical N-doped carbon nanofiber bundles firmly embedded with Fe2N nanoparticles (Fe2N@N-CFBs). In the resultant heterostructure, the Fe2N nanoparticles firmly confined inside the carbon shells are spatially isolated but electronically well connected by the long-range carbon nanofiber framework. This not only provides direct and continuous conductive pathways to facilitate electron/ion transport, but also helps cushion the volume expansion of the encapsulated Fe2N to preserve the electrode microstructure. Considering its unique structural characteristics, Fe2N@N-CFBs as an advanced anode material exhibits remarkable electrochemical performances for lithium- and potassium-ion batteries. Moreover, this bio-derived structural strategy can pave the way for novel low-cost and high-efficiency syntheses of metal-nitride/carbon nanofiber heterostructures for potential applications in energy-related fields and beyond.

| S-EPMC7770912 | biostudies-literature

Carbothermal Synthesis of Ni/Fe Bimetallic Nanoparticles Embedded into Graphitized Carbon for Efficient Removal of Chlorophenol.

Project description:The reactivity of nanoscale zero-valent iron is limited by surface passivation and particle agglomeration. Here, Ni/Fe bimetallic nanoparticles embedded into graphitized carbon (NiFe@GC) were prepared from Ni/Fe bimetallic complex through a carbothermal reduction treatment. The Ni/Fe nanoparticles were uniformly distributed in the GC matrix with controllable particle sizes, and NiFe@GC exhibited a larger specific surface area than unsupported nanoscale zero-valent iron/nickel (FeNi NPs). The XRD results revealed that Ni/Fe bimetallic nanoparticles embedded into graphitized carbon were protected from oxidization. The NiFe@GC performed excellently in 2,4,6-trichlorophenol (TCP) removal from an aqueous solution. The removal efficiency of TCP for NiFe@GC-50 was more than twice that of FeNi nanoparticles, and the removal efficiency of TCP increased from 78.5% to 94.1% when the Ni/Fe molar ratio increased from 0 to 50%. The removal efficiency of TCP by NiFe@GC-50 can maintain 76.8% after 10 days of aging, much higher than that of FeNi NPs (29.6%). The higher performance of NiFe@GC should be ascribed to the significant synergistic effect of the combination of NiFe bimetallic nanoparticles and GC. In the presence of Ni, atomic H* generated by zero-valent iron corrosion can accelerate TCP removal. The GC coated on the surface of Ni/Fe bimetallic nanoparticles can protect them from oxidation and deactivation.

| S-EPMC8226776 | biostudies-literature

Adsorption and desorption of flavonoids on activated carbon impregnated with different metal ions.

Project description:In this study, four metal ions Mg2+, Al3+, Fe3+, and Zn2+ were loaded on the surface of activated carbon by an impregnation method coupled with high-temperature calcination to prepare modified activated carbon. Scanning electron microscopy, specific surface area and pore size analysis, X-ray diffraction, and Fourier infrared spectroscopy were used to evaluate the structure and morphology of the modified activated carbon. The findings show that the modified activated carbon had a large microporous structure and high specific surface area, both of which significantly improved absorbability. This study also investigated the adsorption and desorption kinetics of the prepared activated carbon for three flavonoids with representative structures. The adsorption amounts of quercetin, luteolin, and naringenin in the blank activated carbon reached 920.24 mg g-1, 837.07 mg g-1, and 677.37 mg g-1, while for activated carbon impregnated with Mg, the adsorption amounts reached 976.34 mg g-1, 963.39 mg g-1, and 817.98 mg g-1, respectively; however, the desorption efficiencies of the three flavonoids varied a lot. The differences in desorption rates of naringenin as compared with quercetin and luteolin in the blank activated carbon were 40.13% and 46.22%, respectively, and the difference in desorption rates increased to 78.46% and 86.93% in the activated carbon impregnated with Al. The differences provide a basis for the application of this type of activated carbon in the selective enrichment and separation of flavonoids.

| S-EPMC10291256 | biostudies-literature

In situ synthesis of nanostructured Fe3O4@TiO2 composite grown on activated carbon cloth as a binder-free electrode for high performance supercapacitors.

Project description:Transition metal oxide (TMO) nanomaterials with regular morphology have received widening research attention as electrode materials due to their improved electrochemical characteristics. In this study we present the successful fabrication of an Fe3O4/TiO2 nanocomposite grown on a carbon cloth (Fe3O4/TiO2@C) used as a high-efficiency electrochemical supercapacitor electrode. Flexible electrodes are directly used for asymmetric supercapacitors without any binder. The increased specific surface area of the TiO2 nanorod arrays provides sufficient adsorption sites for Fe3O4 nanoparticles. An asymmetric supercapacitor composed of Fe3O4/TiO2@C is tested in 1 M Na2SO3 electrolyte, and the synergistic effects of fast reversible Faraday reaction on the Fe3O4/TiO2 surface and the highly conductive network formed by TiO2@C help the electrode to achieve a high areal capacitance of 304.1 mF cm-2 at a current density of 1 mA cm-2 and excellent cycling stability with 90.7% capacitance retention at 5 mA cm-2 after 10 000 cycles. As a result, novel synthesis of a binder-free Fe3O4/TiO2@C electrode provides a feasible approach for developing competitive candidates in supercapacitor applications.

| S-EPMC9036530 | biostudies-literature

Ball milling synthesis of Fe3O4 nanoparticles-functionalized porous boron nitride with enhanced cationic dye removal performance.

Project description:Enhancement of the adsorption performance and recyclability of adsorbents is a crucial aspect of water treatment. Herein, we used one-dimensional porous boron nitride (PBN) as a carrier to load Fe3O4 nanoparticles for the preparation of Fe3O4 nanoparticles-functionalized porous boron nitride (Fe3O4/PBN) via a ball milling method. The high-energy ball milling promoted the creation of a negatively charged PBN surface and facilitated the uniform distribution of Fe3O4 nanoparticles on the surface of PBN. The adsorption performance of Fe3O4/PBN toward cationic dyes could be significantly improved while no enhancement was observed for anionic dyes. The great adsorption performance of Fe3O4/PBN is due to its surface functional groups and surface defects formed in the ball milling process. Moreover, the strong interaction force between Fe3O4/PBN and cationic dyes promotes rapid initial adsorption due to their negatively charged surface. Magnetic measurements demonstrated that Fe3O4/PBN is superparamagnetic. The composites with low loadings of Fe3O4 nanoparticles could be quickly separated from the aqueous solution under a low applied magnetic field, improving their recyclability. This work highlights the role of ball milling in improving the adsorption performance of Fe3O4/PBN and greatly promotes the practical application of Fe3O4/PBN in the field of environmental purification.

| S-EPMC10898448 | biostudies-literature

Fe3O4@C Core-Shell Carbon Hybrid Materials as Magnetically Separable Adsorbents for the Removal of Dibenzothiophene in Fuels.

Project description:Herein, we demonstrate a new class of core-shell magnetic carbon hybrid materials (Fe3O4@C) for remarkable adsorptive desulfurization of dibenzothiophene (DBT), which have been successfully prepared through hydrocarbonization of glucose on the surface of Fe3O4 and the subsequent pyrolyzation process. The as-obtained Fe3O4@C retains amorphous nature of carbon shells with a large surface area and displays an increase of iron atoms as active sites under elevated pyrolyzation temperature which is favorable in the adsorption of sulfur-containing species through physical and chemical adsorption, respectively. We investigate the adsorption capacity and efficiency of Fe3O4@C as a magnetically adsorbent for the removal of DBT in model oils under various experimental conditions including the adsorbent obtained at different temperatures, the amount of adsorbents, the DBT initial concentration, the regeneration approach, as well as the interference species. Our results demonstrated that the as-obtained Fe3O4@C at 650 °C (Fe3O4@C-650) displays a remarkable estimated adsorption performance (57.5 mg DBT/g for 200 ppmw), extraordinary high desulfurization efficiency (99% for 200 ppmw), and a high selectivity for DBT compared with its derivatives. Moreover, Fe3O4@C can be recovered in a quite easy, economical, and eco-friendly manner by an external magnet after five cycles without significant weight loss, which significantly simplifies the operation procedure and favors the recycle of Fe3O4@C. Combined with the economic and eco-friendly merits, Fe3O4@C offers a new avenue to employ the magnetic carbon materials for industrial applications and provides a promising substitute for adsorptive desulfurization in view of academic, industrial, and environmental aspects.

| S-EPMC6648741 | biostudies-literature