Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth of sillenite Bi₁₂FeO₂₀ single crystals: structural, thermal, optical, photocatalytic features and first principle calculations.

ABSTRACT: Ideal sillenite type Bi₁₂FeO₂₀ (BFO) micron sized single crystals have been successfully grown via inexpensive hydrothermal method. The refined single crystal X-ray diffraction data reveals cubic Bi₁₂FeO₂₀ structure with single crystal parameters. Occurrence of rare Fe⁴⁺ state is identified via X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The lattice parameter (a) and corresponding molar volume (V_m) of Bi₁₂FeO₂₀ have been measured in the temperature range of 30-700 °C by the X-ray diffraction method. The thermal expansion coefficient (α) 3.93 × 10^-5 K^-1 was calculated from the measured values of the parameters. Electronic structure and density of states are investigated by first principle calculations. Photoelectrochemical measurements on single crystals with bandgap of 2 eV reveal significant photo response. The photoactivity of as grown crystals were further investigated by degrading organic effluents such as Methylene blue (MB) and Congo red (CR) under natural sunlight. BFO showed photodegradation efficiency about 74.23% and 32.10% for degrading MB and CR respectively. Interesting morphology and microstructure of pointed spearhead like BFO crystals provide a new insight in designing and synthesizing multifunctional single crystals.

SUBMITTER: Vavilapalli DS

PROVIDER: S-EPMC7744533 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced photocatalytic dye degradation and hydrogen production ability of Bi25FeO40-rGO nanocomposite and mechanism insight.

Project description:A comprehensive comparison between BiFeO3-reduced graphene oxide (rGO) nanocomposite and Bi25FeO40-rGO nanocomposite has been performed to investigate their photocatalytic abilities in degradation of Rhodamine B dye and generation of hydrogen by water-splitting. The hydrothermal technique adapted for synthesis of the nanocomposites provides a versatile temperature-controlled phase selection between perovskite BiFeO3 and sillenite Bi25FeO40. Both perovskite and sillenite structured nanocomposites are stable and exhibit considerably higher photocatalytic ability over pure BiFeO3 nanoparticles and commercially available Degussa P25 titania. Notably, Bi25FeO40-rGO nanocomposite has demonstrated superior photocatalytic ability and stability under visible light irradiation than that of BiFeO3-rGO nanocomposite. The possible mechanism behind the superior photocatalytic performance of Bi25FeO40-rGO nanocomposite has been critically discussed.

| S-EPMC6056507 | biostudies-literature

Ferromagnetic-like behavior of Bi0.9La0.1FeO3-KBr nanocomposites.

Project description:We studied magnetostatic response of the Bi0.9La0.1FeO3- KBr composites (BLFO-KBr) consisting of nanosized (≈100 nm) ferrite Bi0.9La0.1FeO3 (BLFO) conjugated with fine grinded ionic conducting KBr. When the fraction of KBr is rather small (less than 15 wt%) the magnetic response of the composite is very weak and similar to that observed for the BLFO (pure KBr matrix without Bi1-xLaxFeO3 has no magnetic response as anticipated). However, when the fraction of KBr increases above 15%, the magnetic response of the composite changes substantially and the field dependence of magnetization reveals ferromagnetic-like hysteresis loop with a remanent magnetization about 0.14 emu/g and coercive field about 1.8 Tesla (at room temperature). Nothing similar to the ferromagnetic-like hysteresis loop can be observed in Bi1-zLazFeO3 ceramics with z ≤ 0.15, which magnetization quasi-linearly increases with magnetic field. Different physical mechanisms were considered to explain the unusual experimental results for BLFO-KBr nanocomposites, but only those among them, which are highly sensitive to the interaction of antiferromagnetic Bi0.9La0.1FeO3 with ionic conductor KBr, can be relevant.

| S-EPMC6639540 | biostudies-literature

Methodological Issues in First-Principle Calculations of CH3NH3PbI3 Perovskite Surfaces: Quantum Confinement and Thermal Motion.

Project description:Characterization and control of surfaces and interfaces are critical for photovoltaic and photocatalytic applications. In this work, we propose CH3NH3PbI3 (MAPI) perovskite slab models whose energy levels, free of quantum confinement, explicitly consider the spin-orbit coupling and thermal motion. We detail methodological tools based on the density functional theory that allow achieving these models at an affordable computational cost, and analytical corrections are proposed to correct these effects in other systems. The electronic state energies with respect to the vacuum of the static MAPI surface models, terminated in PbI2 and MAI atomic layers, are in agreement with the experimental data. The PbI2-terminated slab has in-gap surface states, which are independent of the thickness of the slab and also of the orientation of the cation on the surface. The surface states are not useful for alignments in photovoltaic devices, while they could be useful for photocatalytic reactions. The energy levels calculated for the MAI-terminated surface coincide with the widely used values to estimate the MAPI alignment with the charge transport materials, i.e., -5.4 and -3.9 eV for valence band maximum and conduction band minimum, respectively. Our study offers these slab models to provide guidelines for optimal interface engineering.

| S-EPMC7676347 | biostudies-literature

Enhancing thermoelectric performance by Fermi level tuning and thermal conductivity degradation in (Ge1-xBix)Te crystals.

Project description:In this work, a high thermoelectric figure of merit, zT of 1.9 at 740 K is achieved in Ge1-xBixTe crystals through the concurrent of Seebeck coefficient enhancement and thermal conductivity reduction with Bi dopants. The substitution of Bi for Ge not only compensates the superfluous hole carriers in pristine GeTe but also shifts the Fermi level (EF) to an eligible region. Experimentally, with moderate 6-10% Bi dopants, the carrier concentration is drastically decreased from 8.7 × 1020 cm-3 to 3-5 × 1020 cm-3 and the Seebeck coefficient is boosted three times to 75 μVK-1. In the meantime, based on the density functional theory (DFT) calculation, the Fermi level EF starts to intersect with the pudding mold band at L point, where the band effective mass is enhanced. The enhanced Seebeck coefficient effectively compensates the decrease of electrical conductivity and thus successfully maintain the power factor as large as or even superior than that of the pristine GeTe. In addition, the Bi doping significantly reduces both thermal conductivities of carriers and lattices to an extremely low limit of 1.57 W m-1K-1 at 740 K with 10% Bi dopants, which is an about 63% reduction as compared with that of pristine GeTe. The elevated figure of merit observed in Ge1-xBixTe specimens is therefore realized by synergistically optimizing the power factor and downgrading the thermal conductivity of alloying effect and lattice anharmonicity caused by Bi doping.

| S-EPMC6565697 | biostudies-literature

In Situ Studies of 30% Li-Doped Bi25FeO40 Conversion Type Lithium Battery Electrodes.

Project description:One of the important discharge mechanisms for lithium batteries is the conversion reaction mechanism, where a metal oxide (fluoride) can decompose into metallic nanoparticles embedded in a Li2O (LiF) matrix. Here, 30% Li-doped Bi25FeO40 is successfully synthesized and displays an electrochemical discharge capacity of ∼300 mAh/g above 1.5 V (vs Li/Li+). During the electrochemical cycling process, 30% Li-doped Bi25FeO40 is decomposed into metallic Bi. During the subsequent charging process, the metallic bismuth can be first converted into an amorphous bismuth oxide phase, which contributed to the electrochemical discharge activities observed between 2 and 2.5 V. At a higher charging voltage between 3.5 and 5 V, metallic Bi can be oxidized to BiO x 2-O3-2x -, which contributes to the discharge activities observed above 2.5 V. Using graphite as current collectors can prevent the corrosion from O- species and the discharge capacity is greatly enhanced at the voltage region between 1.5 and 2.5 V. This work provides a deeper understanding over the role of oxygen ions during the conversion reaction process and is beneficial for the future design of battery systems based on the conversion reaction.

| S-EPMC6648275 | biostudies-literature

Stabilizing a metalloid {Zn12} unit within a polymetallide environment in [K2Zn20Bi16]6.

Project description:The access to molecules comprising direct Zn-Zn bonds has become very topical in recent years for various reasons. Low-valent organozinc compounds show remarkable reactivities, and larger Zn-Zn-bonded gas-phase species exhibit a very unusual coexistence of insulating and metallic properties. However, as Zn atoms do not show a high tendency to form clusters in condensed phases, synthetic approaches for generating purely inorganic metalloid Znx units under ambient conditions have been lacking so far. Here we show that the reaction of a highly reductive solid with the nominal composition K5Ga2Bi4 with ZnPh2 at room temperature yields the heterometallic cluster anion [K2Zn20Bi16]6-. A 24-atom polymetallide ring embeds a metalloid {Zn12} unit. Density functional theory calculations reveal multicenter bonding, an essentially zero-valent situation in the cluster center, and weak aromaticity. The heterometallic character, the notable electron-delocalization, and the uncommon nano-architecture points at a high potential for nano-heterocatalysis.

| S-EPMC7552394 | biostudies-literature

Excellent Infrared Nonlinear Optical Crystals BaMO(IO?)? (M = V, Ta) Predicted by First Principle Calculations.

Project description:Two nonlinear optical crystals, BaVO(IO?)? and BaTaO(IO?)?, are designed by substituting Nb with V and Ta, respectively, in BaNbO(IO?)?, which is itself a recently synthesized infrared nonlinear optical (NLO) material. The designs of BaVO(IO?)? and BaTaO(IO?)? from BaNbO(IO?)? are based on the following motivation: BaVO(IO?)? should have a larger second-harmonic generation (SHG) coefficient than BaNbO(IO?)?, as V will result in a stronger second-order Jahn-Teller effect than Nb due to its smaller ion radius; at the same time, BaTaO(IO?)? should have a larger laser-damage threshold, due to the fact that Ta has a smaller electronegativity leading to a greater band-gap. Established on reliable first-principle calculations, it is demonstrated that BaVO(IO?)? has a much larger SHG coefficient than BaNbO(IO?)? (23.42 × 10-9 vs. 18.66 × 10-9 esu); and BaTaO(IO?)? has a significantly greater band-gap than BaNbO(IO?)? (4.20 vs. 3.55 eV). Meanwhile, the absorption spectra and birefringences of both BaVO(IO?)? and BaTaO(IO?)? are acceptable for practice, suggesting that these two crystals can both be expected to be excellent infrared NLO materials.

| S-EPMC6213473 | biostudies-literature

Bi0.9Ho0.1FeO3/TiO2 Composite Thin Films: Synthesis and Study of Optical, Electrical and Magnetic Properties.

Project description:A visible light active Bi0.9Ho0.1FeO3 nanoparticles/TiO2 composite thin films with different mol.% of Bi0.9Ho0.1FeO3 were successfully prepared via non-aqueous sol-gel method. The incorporation of 5, 10 and 20 mol.% Bi0.9Ho0.1FeO3 nanoparticles in the precursor solution of TiO2 brings modifications in the functional properties of the composite thin films. XPS analysis indicates that interdiffusion of Fe3+, Ho3+, Bi3+/Ti4+ ions through the interfaces between Bi0.9Ho0.1FeO3 nanoparticles and TiO2 matrix reduces the concentration of Ti3+ ions. X-ray diffraction analysis affirms that TiO2 and Bi0.9Ho0.1FeO3 retain anatase and orthorhombic phase respectively in composite films. The composite thin film containing 20 mol.% Bi0.9Ho0.1FeO3 nanoparticles exhibits the most prominent absorption phenomenon in visible region and has significantly reduced indirect band gap of 2.46 eV compared to that of pure TiO2 (3.4 eV). Hall effect measurements confirm that the resistivity of composite film increases by ∼2.33 orders of magnitude and its carrier concentration decreases by 1.8 orders of magnitude at 5 mol.% Bi0.9Ho0.1FeO3 nanoparticles addition compared to those of pure TiO2 film. Moreover, the pure film exhibits diamagnetism, whereas the composite films have both large ferromagnetic and small diamagnetic components. The findings in this research justify that the composite film can be a potential candidate for making improved photocatalyst, resistors and spintronic devices.

| S-EPMC6435789 | biostudies-literature

Facile Synthesis of Ternary g-C3N4@BiOCl/Bi12O17Cl2 Composites With Excellent Visible Light Photocatalytic Activity for NO Removal.

Project description:In this study, novel two-dimensional (2D) g-C3N4@BiOCl/Bi12O17Cl2 composites have been fabricated through a facile deposition-precipitation process. The as-prepared photocatalysts were characterized by XRD, SEM, TEM, XPS, UV-vis DRS, PL, Photocurrent, EIS, ESR, and N2 adsorption-desorption. The photocatalytic activities were investigated through NO removal test in gas under visible light irradiation (λ > 420 nm). The g-C3N4@BiOCl/Bi12O17Cl2 composites exhibit enhanced visible light absorption and photo-induced electron-hole separation efficiency, compared with pristine g-C3N4 and BiOCl/Bi12O17Cl2. The intimated contact interfaces between g-C3N4 and BiOCl/Bi12O17Cl2 nanosheets are responsible for the more efficient photochemical interactions. The present work provides a new direction to develop a class of ternary g-C3N4-based visible-light-driven photocatalysts for environmental purification.

| S-EPMC6470255 | biostudies-literature

Electronic Structure and Lithium Diffusion in LiAl2(OH)6Cl Studied by First Principle Calculations.

Project description:First-principles calculations based on the density functional theory (DFT) were carried out to study the atomic structure and electronic structure of LiAl2(OH)6Cl, the only material in the layered double hydroxide family in which delithiation was found to occur. Ab initio molecular dynamics (AIMD) simulations were used to explore the evolution of the structure of LiAl2(OH)6Cl during a thermally induced delithiation process. The simulations show that this process occurs due to the drastic dynamics of Li+ at temperatures higher than ~450 K, in which the [Al2(OH)6] host layers remain stable up to 1100 K. The calculated large value of the Li+ diffusion coefficient D, ~ 3.13 × 10 - 5 c m 2 / s , at 500 K and the high stability of the [Al2(OH)6] framework suggest a potential technical application of the partially-delithiated Li1-xAl2(OH)6Cl1-x (0 < x < 1) as a superionic conductor at high temperatures.

| S-EPMC6681411 | biostudies-literature