Dataset Information

Digitizing abdominal palpation with a pressure measurement and positioning device.

ABSTRACT: An abdominal physical examination is one of the most important tools in evaluating patients with acute abdominal pain. We focused on palpation, in which assessment is made according to the patient's response and force feedback. Since palpation is performed manually by the examiner, the uniformity of force and location is difficult to achieve during examinations. We propose an integrated system to quantify palpation pressure and location. A force sensor continuously collects pressure data, while a camera locates the precise position of contact. The system recorded, displayed average and maximum pressure by creating a pressure/time curve for computer-aided diagnosis. Compared with previous work on pressure sensors of quantifying abdominal palpation, our proposed system is the integrated approach to measure palpation force and track the corresponding position at the same time, for further diagnosis. In addition, we only make use of a sensing device and a general web camera, rather than commercial algometry and infrared cameras used in the previous work. Based on our clinical trials, the statistics of palpation pressure values and the corresponding findings are also reported. We performed abdominal palpation with our system for twenty-three healthy participants, including fourteen males and nine females. We applied two grades of force on the abdomen (light and deep) by four-quadrant and nine-region schemes, record the value of pressure and location. In the four-quadrant scheme, the average pressures of abdominal palpation with light and deep force levels were 0.506(N) and 0.552(N), respectively. In the nine-region scheme, the average pressures were 0.496(N) and 0.577(N), respectively. Two episodes of contact dermal reaction were identified. According to our experiment statistics, there is no significant difference in the force level between the four-quadrant and nine-region scheme. Our results have the potential to be used as a reference guide while designing digital abdominal palpation devices.

SUBMITTER: Hsu JL

PROVIDER: S-EPMC7750001 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Digitizing abdominal palpation with a pressure measurement and positioning device.

Hsu Jia-Lien JL Lee Chia-Hui CH Hsieh Chung-Ho CH

PeerJ 20201217

An abdominal physical examination is one of the most important tools in evaluating patients with acute abdominal pain. We focused on palpation, in which assessment is made according to the patient's response and force feedback. Since palpation is performed manually by the examiner, the uniformity of force and location is difficult to achieve during examinations. We propose an integrated system to quantify palpation pressure and location. A force sensor continuously collects pressure data, while ...[more]

PMID: 33362971

Similar Datasets

Project description:Introduction: Increased intra-abdominal pressure (IAP) has an important impact on morbidity and mortality in critically ill patients. The SERENNO Sentinel system (Serenno Medical, Yokne'am Illit, Israel) is a novel device that allows automatic and continuous IAP measurements. Aims: Pre-clinical validation in a bench model study comparing the new device with the gold standard method and two other continuous IAP measurement devices. Methods: IAP measurement with the novel SERENNO device (IAPSER) was compared with the gold standard IAPH2O (water column height) and two other automatic and continuous IAP measurement devices: IAPCiM measured via the CiMON device (Pulsion Medical Systems, Munich, Germany) and IAPSPIE measured using the Spiegelberg device (Spiegelberg, Hamburg, Germany), which previously received the CE mark for clinical applications. The IAP measurement was performed six times (n = 6) at each pressure value (between 0 and 35 mmHg) with different methods and the height of the water column in a bench-top phantom was used as the reference IAP for further interpretations. In addition to the quadruple comparisons, intra- and inter-observer variability of IAP measurements were also calculated. Correlation studies and Bland and Altman's analyses were performed in addition to the concordance study. Results: The CiMON and Spiegelberg devices showed a greater dynamic range and standard deviation when recording IAPCiM and IAPSPIE compared with IAPSER. In general, the maximum and minimum values of IAP recorded with each device (at each level of IAPH2O) were significantly different from each other. However, the average values were in very good agreement. The highest correlation was observed between IAPSER and IAPH2O, and IAPSER and IAPSPIE (R = 0.99, p = 0.001 for both comparisons and intra- and inter-observer measurements). Although the CiMON and SERENNO systems were in very good agreement with each other, a slightly smaller correlation coefficient was found between them (R = 0.95, p = 0.001, and R = 0.96, p = 0.001 for intra- and inter-observer measurements, respectively). When compared to the gold standard (IAPH2O), Bland and Altman's analysis showed a mean difference of +0.44, -0.25, and -0.04 mmHg for the intra-observer measurements and +0.18, -0.75, and -0.58 mmHg for the inter-observer measurements for IAPSER, IAPCiM, and IAPSPIE, respectively. IAPSER showed a small positive bias (overestimation), while IAPCiM and IAPSPIE showed a negative bias (underestimation) when compared to IAPH2O. Further statistical analysis showed a concordance coefficient of 100% with an excellent ability of the SERENNO system in tracking IAPH2O changes. Conclusions: Pre-clinical validation of a new IAP monitoring device (SERENNO) showed very promising results when compared with the gold standard and other continuous techniques; however, clinical trials should be followed as the next stage of the validation process. Based on the actual research guidelines, the SERENNO system can be used interchangeably with the gold standard.

Project description:Colorectal cancer is the second-leading cause of cancer death in the United States. Colorectal cancer screening is recommended to begin at age 50 years for most men and women at average risk for this disease. Colonoscopy is a gold standard method of screening for colorectal cancer, allowing for the detection and removal of colorectal polyps, some of which can progress into malignancy. The literature has shown that the removal of polyps during a colonoscopy results in decreased incidence and mortality related to colorectal cancer. Indeed, the last decade has shown a decline in colorectal cancer incidence and mortality in adults over age 50, largely due to increased colonoscopy screening. Currently, the risk of a patient developing colorectal cancer and thus time intervals for colonoscopy surveillance post-polypectomy is determined by the number, pathology, and size of the polyps that are observed and removed during the colonoscopy procedure. Current surveillance guidelines indicate the need for a shorter interval before the next colonoscopy for patients who have one or more polyps that are 10mm or larger. In addition, different polypectomy techniques are indicated for the treatment of polyps less than 20mm in size. For example, cold forceps may be appropriate for removal of 1mm to 2mm polyps, cold snare for polyps less than 10mm, and hot-snare resection for polyps 10mm to 19mm. Yet, while the number and pathology of polyps are easily obtained and verified, it is standard practice for the size of a polyp to be assessed through endoscopist optical visualization alone, without use of an objective device or standard by which to measure it. Often, the endoscopist will compare the size of the polyp to the size of the snare loop to estimate and document the size of the polyp(s). However, with the size of a polyp being a major indicator of malignant potential as well as an indicator of appropriate polypectomy technique and surveillance intervals, a device with which to take and document accurate and objective measurements of polyps during colonoscopy holds the potential for health benefits. In addition to having a potential clinical benefit for each patient in terms of polypectomy and surveillance intervals, as an objective indicator of polyp size, this technique also holds promise for use in future studies that evaluate polyp size as an indicator of potential malignancy (or future malignancy) and for use by national clinical guidelines committees who may utilize these objective data to update future screening and surveillance recommendations.

Project description:Traditional urodynamics have poor correlation with urological symptoms. Ambulatory urodynamics may improve this correlation but the need for a transurethral catheter and the time-consuming nature of this examination limits its use. Therefore, the objective of this study was to develop a wireless real-time bladder pressure measurement device for repeated and prolonged-term measurement of bladder behavior in awake pigs. The Bladder Pill is an intravesical device with a pressure microsensor and a 3-dimensional inductive coupling coil for energy supply. A corresponding external coil provides wireless power transmission and real-time communication of bladder pressure data. To test the correlation between the pressure data measured by the device and by standard methods, we compared static water column pressures with this device and water-filled urodynamic catheter systems. In vivo assessment of awake voiding by the pill was done by introducing the bladder pill into the bladder of Göttingen minipigs. An air-charged urodynamic catheter was introduced transurethrally as control for pressure measurements. The optimal physical configuration of the pill was investigated to maximize the containment in the bladder. We used two versions of external signal receivers (one waistband and one rectangular frame) to test the optimal external signal capture. Next to that, we performed short-term and medium-term comparative pressure studies. The in vitro static pressure measurement demonstrated a mean difference of less than 1 cm H2O between the methods. The optimal design of the pill for maximal retainment in the bladder proved to be a pigtail configuration. The bending of the device during bladder contractions caused offset of 2.7 +/- 1.4 cm H2O (mean +/- SD) on the pressure measurements. The rectangular frame performed signal capture during 5 consecutive voids with a good correlation of the pressure measurements. The device can be inserted through the urethra and is retrieved using string or endoscopic extraction. In conclusion, wireless long-term measurement of bladder pressure is demonstrated and yields comparable results to current available catheter methods of measurement in a pig model.

Dataset Information

Digitizing abdominal palpation with a pressure measurement and positioning device.

Publications

Digitizing abdominal palpation with a pressure measurement and positioning device.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets