Browse
Submit Data
Databases
API
Help

Dataset Information

11 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Guanine-Derived Porous Carbonaceous Materials: Towards C₁ N₁.

ABSTRACT: Herein, the basic nature of noble covalent, sp2-conjugated materials prepared via direct condensation of guanine in the presence of an inorganic salt melt as structure directing agent was studied. At temperatures below 700?°C stable and more basic addition products with at C/N ratio of 1 (C₁ N₁ adducts) and with rather uniform micropore sizes were formed. Carbonization at higher temperatures broke the structural motif, and N-doped carbons with 11?wt?% and surface areas of 1900?m² ?g^-1 were obtained. The capability for CO₂ sorption and catalytic activity of the materials depended of both their basicity and their pore morphology. The optimization of the synthetic parameters led to very active (100?% conversion) and highly selective (99?% selectivity) heterogeneous base catalysts, as exemplified with the model Knoevenagel condensation of benzaldehyde with malononitrile. The high stability upon oxidation of these covalent materials and their basicity open new perspectives in heterogeneous organocatalysis.

SUBMITTER: Kossmann J

PROVIDER: S-EPMC7756593 | biostudies-literature | 2020 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

CO₂ Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues.

Project description:Carbonaceous porous materials derived from leather skin residues have been found to have excellent CO₂ adsorption properties, with interestingly high gas selectivities for CO₂ (α > 200 at a gas composition of 15% CO₂/85% N₂, 273K, 1 bar) and capacities (>2 mmol·g-1 at 273 K). Both CO₂ isotherms and the high heat of adsorption pointed to the presence of strong binding sites for CO₂ which may be correlated with both: N content in the leather residues and ultrasmall pore sizes.

| S-EPMC5452854 | biostudies-other

Electrochemical Performance Enhancement of Micro-Sized Porous Si by Integrating with Nano-Sn and Carbonaceous Materials.

Project description:Silicon is investigated as one of the most prospective anode materials for next generation lithium ion batteries due to its superior theoretical capacity (3580 mAh g-1), but its commercial application is hindered by its inferior dynamic property and poor cyclic performance. Herein, we presented a facile method for preparing silicon/tin@graphite-amorphous carbon (Si/Sn@G-C) composite through hydrolyzing of SnCl2 on etched Fe-Si alloys, followed by ball milling mixture and carbon pyrolysis reduction processes. Structural characterization indicates that the nano-Sn decorated porous Si particles are coated by graphite and amorphous carbon. The addition of nano-Sn and carbonaceous materials can effectively improve the dynamic performance and the structure stability of the composite. As a result, it exhibits an initial columbic efficiency of 79% and a stable specific capacity of 825.5 mAh g-1 after 300 cycles at a current density of 1 A g-1. Besides, the Si/Sn@G-C composite exerts enhanced rate performance with 445 mAh g-1 retention at 5 A g-1. This work provides an approach to improve the electrochemical performance of Si anode materials through reasonable compositing with elements from the same family.

| S-EPMC7919461 | biostudies-literature

Non-Porous versus Mesoporous Siliceous Materials for CO<sub>2</sub> Capture.

Project description:In this study, the adsorption properties of a Stöber silica-based material towards CO2 were evaluated for the first time. The use of Stöber silica as support is interesting for real technological applications mainly due to economic factors. Furthermore, a direct comparison between the non porous Stöber sample with an ordered porous material (based on MCM-41 silica) allowed to evaluate the effect of the porosity on the CO2 adsorption properties. In order to make silica materials reactive towards CO2, they were functionalized by introducing amino groups via grafting of 3-[2-(2-aminoethyl)aminoethyl]aminopropyltrimethoxysilane. After a qualitative study of the CO2 adsorption, the quantitative determination of CO2 adsorption capacity at 35 °C revealed that the mesoporous material is more efficient compared to the Stöber-based one (adsorption capacity values of 0.49 and 0.58 mol/kg for Stöber-based and mesoporous samples). However, since the difference in the adsorption capacity is only about 15 % and the Stöber-based sample is considerably cheaper, the non-porous sample should be considered as a favourable adsorbent material for CO2 capture applications.

| S-EPMC6587325 | biostudies-literature

3D-Printed Porous Magnetic Carbon Materials Derived from Metal-Organic Frameworks.

Project description:Here we report new porous carbon materials obtained by 3D printing from photopolymer compositions with zinc- and nickel-based metal-organic frameworks, ZIF-8 and Ni-BTC, followed by high-temperature pyrolysis. The pyrolyzed materials that retain the shapes of complex objects contain pores, which were produced by boiling zinc and magnetic nickel particles. The two thus provided functionalities-large specific surface area and ferromagnetism-that pave the way towards creating heterogenous catalysts that can be easily removed from reaction mixtures in industrial catalytic processes.

| S-EPMC8626018 | biostudies-literature

Eucalyptus derived heteroatom-doped hierarchical porous carbons as electrode materials in supercapacitors.

Project description:Carbon-based supercapacitors have aroused ever-increasing attention in the energy storage field due to high conductivity, chemical stability, and large surface area of the investigated carbon active materials. Herein, eucalyptus-derived nitrogen/oxygen doped hierarchical porous carbons (NHPCs) are prepared by the synergistic action of the ZnCl2 activation and the NH4Cl blowing. They feature superiorities such as high specific surface area, rational porosity, and sufficient N/O doping. These excellent physicochemical characteristics endow them excellent electrochemical performances in supercapacitors: 359 F g-1 at 0.5 A g-1 in a three-electrode system and 234 F g-1 at 0.5 A g-1 in a two-electrode system, and a high energy density of 48 Wh kg-1 at a power density of 750 W kg-1 accompanied by high durability of 92% capacitance retention through 10,000 cycles test at a high current density of 10 A g-1 in an organic electrolyte. This low-cost and facile strategy provides a novel route to transform biomass into high value-added electrode materials in energy storage fields.

| S-EPMC7471285 | biostudies-literature

Towards High-performance Materials Based on Carbohydrate-Derived Polyamide Blends.

Project description:A bio-derived monomer called 2,3:4,5-di-O-isopropylidene-galactarate acid/ester (GalXMe) has great potential in polymer production. The unique properties of this molecule, such as its rigidity and bulkiness, contribute to the good thermal properties and appealing transparency of the material. The main problem, however, is that like other biobased materials, the polymers derived thereof are very brittle. In this study, we report on the melt blending of GalXMe polyamides (PAs) with different commercial PA grades using extrusion as well as blend characterization. Biobased PA blends showed limited to no miscibility with other polyamides. However, their incorporation resulted in strong materials with high Young moduli. The increase in modulus of the prepared GalXMe blends with commercial PAs ranged from up to 75% for blends with aliphatic polyamide composed of 1,6-diaminohexane and 1,12-dodecanedioic acid PA(6,12) to up to 82% for blends with cycloaliphatic polyamide composed of 4,4'-methylenebis(cyclohexylamine) and 1,12-dodecanedioic acid PA(PACM,12). Investigation into the mechanism of blending revealed that for some polyamides a transamidation reaction improved the blend compatibility. The thermal stability of the biobased PAs depended on which diamine was used. Polymers with aliphatic/aromatic or alicyclic diamines showed no degradation, whereas with fully aromatic diamines such as p-phenylenediamine, some degradation processes were observed under extrusion conditions (260/270 °C).

| S-EPMC6473389 | biostudies-literature

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications.

Project description:Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

| S-EPMC9307687 | biostudies-literature

High-throughput dielectrophoretic filtration of sub-micron and micro particles in macroscopic porous materials.

Project description:State-of-the-art dielectrophoretic (DEP) separation techniques provide unique properties to separate particles from a liquid or particles with different properties such as material or morphology from each other. Such separators do not operate at throughput that is sufficient for a vast fraction of separation tasks. This limitation exists because high electric field gradients are required to drive the separation which are generated by electrode microstructures that limit the maximum channel size. Here, we investigate DEP filtration, a technique that uses open porous microstructures instead of microfluidic devices to easily increase the filter cross section and, therefore, also the processable throughput by several orders of magnitude. Previously, we used simple microfluidic porous structures to derive design rules predicting the influence of key parameters on DEP filtration in real complex porous filters. Here, we study in depth DEP filtration in microporous ceramics and underpin the previously postulated dependencies by a broad parameter study (Lorenz et al., 2019). We will further verify our previous claim that the main separation mechanism is indeed positive DEP trapping by showing that we can switch from positive to negative DEP trapping when we increase the electric conductivity of the suspension. Two clearly separated trapping mechanisms (positive and negative DEP trapping) at different conductivities can be observed, and the transition between them matches theoretical predictions. This lays the foundation for selective particle trapping, and the results are a major step towards DEP filtration at high throughput to solve existing separation problems such as scrap recovery or cell separation in liquid biopsy. Graphical abstract.

| S-EPMC7235068 | biostudies-literature

Hierarchically porous silicon-carbon-nitrogen hybrid materials towards highly efficient and selective adsorption of organic dyes.

Project description:The hierarchically macro/micro-porous silicon-carbon-nitrogen (Si-C-N) hybrid material was presented with novel functionalities of totally selective and highly efficient adsorption for organic dyes. The hybrid material was conveniently generated by the pyrolysis of commercial polysilazane precursors using polydivinylbenzene microspheres as sacrificial templates. Owing to the Van der Waals force between sp-hybridized carbon domains and triphenyl structure of dyes, and electrostatic interaction between dyes and Si-C-N matrix, it exhibites high adsorption capacity and good regeneration and recycling ability for the dyes with triphenyl structure, such as methyl blue (MB), acid fuchsin (AF), basic fuchsin and malachite green. The adsorption process is determined by both surface adsorption and intraparticle diffusion. According to the Langmuir model, the adsorption capacity is 1327.7 mg·g(-1) and 1084.5 mg·g(-1) for MB and AF, respectively, which is much higher than that of many other adsorbents. On the contrary, the hybrid materials do not adsorb the dyes with azo benzene structures, such as methyl orange, methyl red and congro red. Thus, the hierarchically porous Si-C-N hybrid material from a facile and low cost polymer-derived strategy provides a new perspective and possesses a significant potential in the treatment of wastewater with complex organic pollutants.

| S-EPMC4300473 | biostudies-literature

Porous Organic Polymer-Derived Fe<sub>2</sub>P@N,P-Codoped Porous Carbon as Efficient Electrocatalysts for pH Universal ORR.

Project description:A new porous organic polymer (CP-CMP) was designed and synthesized via the direct polymerization of pyrrole and hexakis(4-formyl-phenoxy)cyclotriphosphazene, skipping the tedious synthetic procedure of porphyrin-monomers containing special groups. This special porous organic polymer (POP) serves as an "all in one" precursor for C, N, P, and Fe. Direct carbonization of this special POP afforded Fe2P@N,P-codoped porous carbons with hierarchical pore structure and high graphitization. Finally, the optimal catalyst (CP-CMP-900) prepared by carbonization of CP-CMP at 900 °C exhibited high efficiency for oxygen electroreduction. Typically, CP-CMP-900 presented an oxygen reduction reaction half-wave potential (E 1/2) of 0.85, 0.73, and 0.65 V, respectively, in alkaline, neutral, and acidic media, close to those of commercial Pt/C in the same electrolyte (0.843, 0.71, and 0.74 V). Furthermore, it also displayed excellent methanol immunity and long-time stability in various electrolytes better than commercial Pt/C (20%).

| S-EPMC7143406 | biostudies-literature