Dataset Information

Long-Term Surgical Results of Skip Pedicle Screw Fixation for Patients with Adolescent Idiopathic Scoliosis: A Minimum-Ten-Year Follow-Up Study.

ABSTRACT: Skip pedicle screw fixation for adolescent idiopathic scoliosis (AIS) requires fewer screws and can reduce the risk of neurovascular injury as compared with segmental pedicle screw fixation. However, the long-term impact of screw number reduction on correction and clinical results is unclear. This study examined the 10-year post-operative outcomes of skip pedicle screw fixation for patients with AIS. We reviewed the outcomes of 30 patients who underwent skip pedicle screw fixation for AIS. Radiological and clinical findings were assessed before and immediately, 2 years, and 10 years after surgery in the remaining 25 patients. The mean Cobb angle of the main curve preoperatively and immediately, 2 years, and 10 years post-operatively was 59.4°, 23.4°, 25.8°, and 25.60°, respectively, and was significantly improved at all post-surgical time points (all p < 0.001). The mean correction rate immediately after surgery was 60.8%, and the correction loss rate at the observation end point was 4.8%. The Cobb angle of the lumbar curve was significantly improved immediately after surgery, and the correction persisted until 10 years post-operatively. Remarkable gains were observed for most Scoliosis Research Society-22 patient questionnaire sub-scores at the final follow-up versus preoperative assessments. In conclusion, good correction of the AIS deformity by skip pedicle screw fixation was well maintained over a long follow-up period of 10 years, with clinically meaningful gains in Society-22 patient questionnaire sub-scores.

SUBMITTER: Uehara M

PROVIDER: S-EPMC7764638 | biostudies-literature | 2020 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Long-Term Surgical Results of Skip Pedicle Screw Fixation for Patients with Adolescent Idiopathic Scoliosis: A Minimum-Ten-Year Follow-Up Study.

Uehara Masashi M Kuraishi Shugo S Ikegami Shota S Oba Hiroki H Takizawa Takashi T Munakata Ryo R Hatakenaka Terue T Koseki Michihiko M Takahashi Jun J

Journal of clinical medicine 20201210 12

Skip pedicle screw fixation for adolescent idiopathic scoliosis (AIS) requires fewer screws and can reduce the risk of neurovascular injury as compared with segmental pedicle screw fixation. However, the long-term impact of screw number reduction on correction and clinical results is unclear. This study examined the 10-year post-operative outcomes of skip pedicle screw fixation for patients with AIS. We reviewed the outcomes of 30 patients who underwent skip pedicle screw fixation for AIS. Radio ...[more]

PMID: 33321984

Similar Datasets

Project description:The expectations of both the patient and surgeon have been greatly revised in the last 10 years with the introduction of pedicle screws (PS) in spinal surgery. In this study, we have retrospectively evaluated and compared the results of PS instrumentation and the Hybrid System (HS), the latter consists of pedicle screws, sublaminar wire and hooks. The mean follow-up period was 60.1 months (range: 49-94 months) for the patients of the HS group and 29.3 months (range: 24-35 months) for those of the PS group. In the HS group, pedicle screws were used at the thoracolumbar junction and lumbar vertebra, the bilateral pediculotransverse claw hook configuration was used at the cranial end of the instrumentation, sublaminar wire was used on the concave side of the apical region and the compressive hook was used on the convex side. In the PS group, PS were used on the concave sides at all levels and on the convex side of the cranial and caudal end of instrumentation, in the transition zone and at the apex. The two groups were comparable for variables such as mean age, preoperative Cobb angle, thoracic kyphosis angle, lordosis angle, coronal balance, flexibility of the curve, apical vertebra rotation (AVR), apical vertebra rotation (AVT) and the number of vertebrae included in the fusion (p>0.05). The parameters of values of correction, ratio of correction loss, AV derotation, AVT correction ratio, amount of blood loss, operation time, postoperative global coronal and sagittal balance, thoracic kyphosis angle and lumbar lordosis angle were measured at the last follow-up and used for comparing the HS and PS groups. There was no statistically significant difference between the groups for correction ratio, postoperative coronal balance, postoperative thoracic kyphosis and lumbar lordosis angle, operation time, amount of blood loss and number of fixation points (p>0.05) The difference for the ratio of correction loss, AV derotation angle and the AVT correction ratio at the last follow-up visit and for the total follow-up period between the groups was found to be statistically significant (p<0.05). Although it is possible to obtain a similar amount of correction by either instrumentation system, the loss of correction seems to be lower with the more rigid PS construction. The PS system also has a stronger effect on vertebral bodies, thereby providing better AV de-rotation. There was no significant difference (p>0.05) between the groups in terms of correction rate, postoperative coronal and sagittal balance, operation time, blood loss and number of fixation points. This may indicate that anchor points are more important than the use--or not--of screws. Correction durability and AV de-rotation was better with PS instrumentation, while AVT was better corrected by HS instrumentation (p<0.05). We propose that the reason for the better correction of AVT with HS instrumentation is the forceful translation offered by the sublaminar wire at the apical region, while the reason for the better correction durability of the PS instrumentation may be due to the fact that multiple pedicle screws which afford three-column control are better at maintaining the correction and preventing late deterioration.

Project description:BackgroundCurrent methods of measuring vertebral rotation by plain radiographs rely on anatomic landmarks that are not present in the postoperative spine or require advanced imaging. Furthermore, there are few studies on the incidence of crankshaft with modern pedicle instrumentation.Questions/purposesWe sought to (1) describe and validate a method of vertebral rotation measurement using plain radiographs and (2) measure postoperative rotation in a series of patients treated for adolescent idiopathic scoliosis.MethodsPatients with adolescent idiopathic scoliosis treated with surgery over a 6-year period were reviewed. Patients with computed tomography (CT) scans and radiographs within 60 days of another were included. Vertebral rotation was calculated by radiographic measurements and measured directly by CT scan. As an internal control, patients with two apical pedicle screws on all radiographs were analyzed. Rotation was measured for all patients with at least 1 year of radiographic follow-up.ResultsThree thousand five hundred fifty-two instrumented spinal levels in 308 consecutive patients were reviewed. Ten patients with 93 screws were analyzed by CT and radiographs. The average discrepancy between computed tomography (CT) and radiographs was 3.3?±?1.9°, with 81.7% (76/93) within 5°. Intra- and inter-rater reliabilities for measured axial rotation were excellent (intra-class correlation coefficient (ICC)?=?0.879 and 0.900, respectively). One hundred swventy-eight patients were eligible with an average follow-up of 2.3?±?1.2 years; 84.8% (151/178) had screw(s) visible on all images at the major curve apex. The average postsurgical rotation was 3.5?±?2.9°; 19.2% (29/151) were measured to have a rotation over 5°, and 4.0% (6/151) demonstrated a rotation over 10°. Only 4.6% (7/151) of patients demonstrated a postoperative Cobb angle change over 10°.ConclusionsMost major curves have apical pedicle screw instrumentation that can be followed by radiographs alone to measure rotation. Vertebral rotation measurement requires only plain radiographs and is a more sensitive determination for subtle postoperative crankshaft than change in Cobb angle.

Project description:Study designRetrospective study.ObjectiveTo evaluate the radiological results of fusion with segmental pedicle screw fixation in juvenile idiopathic scoliosis with a minimum 5-year follow-up.Summary of background dataProgression of spinal deformity after posterior instrumentation and fusion in immature patients has been reported by several authors. Segmental pedicle screw fixation has been shown to be effective in controlling both coronal and sagittal plane deformities. However, there is no long term study of fusion with segmental pedicle screw fixation in these group of patients.MethodsSeven patients with juvenile idiopathic scoliosis treated by segmental pedicle screw fixation and fusion were analyzed. The average age of the patients was 7.4 years (range 5-9 years) at the time of the operation. All the patients were followed up 5 years or more (range 5-8 years) and were all Risser V at the most recent follow up. Three dimensional reconstruction of the radiographs was obtained and 3DStudio Max software was used for combining, evaluating and modifying the technical data derived from both 2d and 3d scan data.ResultsThe preoperative thoracic curve of 56 +/- 15 degrees was corrected to 24 +/- 17 degrees (57% correction) at the latest follow-up. The lumbar curve of 43 +/- 14 degrees was corrected to 23 +/- 6 degrees (46% correction) at the latest follow-up. The preoperative thoracic kyphosis of 37 +/- 13 degrees and the lumbar lordosis of 33 +/- 13 degrees were changed to 27 +/- 13 degrees and 42 +/- 21 degrees , respectively at the latest follow-up. None of the patients showed coronal decompensation at the latest follow-up. Four patients had no evidence of crankshaft phenomenon. In two patients slight increase in Cobb angle at the instrumented segments with a significant increase in AVR suggesting crankshaft phenomenon was seen. One patient had a curve increase in both instrumented and non instrumented segments due to incorrect strategy.ConclusionIn juvenile idiopathic curves of Risser 0 patients with open triradiate cartilages, routine combined anterior fusion to prevent crankshaft may not be warranted by posterior segmental pedicle screw instrumentation.

Project description:PurposePedicle screw fixation in the upper cervical spine is a difficult and high-risk procedure. The screw is difficult to place rapidly and accurately, and can lead to serious injury of spinal cord or vertebral artery. The aim of this study was to design an individualized 3D printing navigation template for pedicle screw fixation in the upper cervical spine.MethodsUsing CT thin slices data, we employed computer software to design the navigation template for pedicle screw fixation in the upper cervical spine (atlas and axis). The upper cervical spine models and navigation templates were produced by 3D printer with equal proportion, two sets for each case. In one set (Test group), pedicle screws fixation were guided by the navigation template; in the second set (Control group), the screws were fixed under fluoroscopy. According to the degree of pedicle cortex perforation and whether the screw needed to be refitted, the fixation effects were divided into 3 types: Type I, screw is fully located within the vertebral pedicle; Type II, degree of pedicle cortex perforation is <1 mm, but with good internal fixation stability and no need to renovate; Type III, degree of pedicle cortex perforation is >1 mm or with the poor internal fixation stability and in need of renovation. Type I and Type II were acceptable placements; Type III placements were unacceptable.ResultsA total of 19 upper cervical spine and 19 navigation templates were printed, and 37 pedicle screws were fixed in each group. Type I screw-placements in the test group totaled 32; Type II totaled 3; and Type III totaled 2; with an acceptable rate of 94.60%. Type I screw placements in the control group totaled 23; Type II totaled 3; and Type III totaled 11, with an acceptable rate of 70.27%. The acceptability rate in test group was higher than the rate in control group. The operation time and fluoroscopic frequency for each screw were decreased, compared with control group.ConclusionThe individualized 3D printing navigation template for pedicle screw fixation is easy and safe, with a high success rate in the upper cervical spine surgery.

Dataset Information

Long-Term Surgical Results of Skip Pedicle Screw Fixation for Patients with Adolescent Idiopathic Scoliosis: A Minimum-Ten-Year Follow-Up Study.

Publications

Long-Term Surgical Results of Skip Pedicle Screw Fixation for Patients with Adolescent Idiopathic Scoliosis: A Minimum-Ten-Year Follow-Up Study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets