Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrathin Ti₃C₂T_x (MXene) Nanosheet-Wrapped NiSe₂ Octahedral Crystal for Enhanced Supercapacitor Performance and Synergetic Electrocatalytic Water Splitting.

ABSTRACT: Metal selenides, such as NiSe₂, have exhibited great potentials as multifunctional materials for energy storage and conversation. However, the utilization of pure NiSe₂ as electrode materials is limited by its poor cycling stability, low electrical conductivity, and insufficient electrochemically active sites. To remedy these defects, herein, a novel NiSe₂/Ti₃C₂T_x hybrid with strong interfacial interaction and electrical properties is fabricated, by wrapping NiSe₂ octahedral crystal with ultrathin Ti₃C₂T_x MXene nanosheet. The NiSe₂/Ti₃C₂T_x hybrid exhibits excellent electrochemical performance, with a high specific capacitance of 531.2 F g^-1 at 1 A g^-1 for supercapacitor, low overpotential of 200 mV at 10 mA g^-1, and small Tafel slope of 37.7 mV dec^-1 for hydrogen evolution reaction (HER). Furthermore, greater cycling stabilities for NiSe₂/Ti₃C₂T_x hybrid in both supercapacitor and HER have also been achieved. These significant improvements compared with unmodified NiSe₂ should be owing to the strong interfacial interaction between NiSe₂ octahedral crystal and Ti₃C₂T_x MXene, which provides enhanced conductivity, fast charge transfer as well as abundant active sites, and highlight the promising potentials in combinations of MXene with metal selenides for multifunctional applications such as energy storage and conversion.

SUBMITTER: Jiang H

PROVIDER: S-EPMC7770682 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Living Atomically Dispersed Cu Ultrathin TiO2 Nanosheet CO2 Reduction Photocatalyst.

Project description:Supported atomically dispersed metals are proving to be efficacious photocatalysts for CO2 reduction to solar fuels. While being atom efficient, they suffer from being noble, rare, and costly (Pt, Pd, Au, Ag, Rh) and lacking in long-term stability. Herein, all of these problems are solved with the discovery that atomically dispersed Cu supported on ultrathin TiO2 nanosheets can photocatalytically reduce an aqueous solution of CO2 to CO. The atomically dispersed Cu can be recycled in a straightforward procedure when they become oxidatively deactivated. This advance bodes well for the development of a solar fuels technology founded on abundant, low-cost, nontoxic, atomically dispersed metal photocatalysts.

| S-EPMC6685599 | biostudies-literature

Ultrathin Mesoporous Co3O4 Nanosheet Arrays for High-Performance Lithium-Ion Batteries.

Project description:Transition metal oxides, such as Co3O4, have attracted great attention for lithium-ion batteries (LIBs) due to their high theoretical capacity and satisfactory chemical stability. However, the slow kinetics of Li-ion and electron transport as well as poor cycling stability still largely restrains their applications. Here, we report the rational design of well-defined mesoporous ultrathin Co3O4 nanosheet arrays (NSAs) by topological transformation of layered double hydroxides nanosheet arrays (NSAs), which demonstrate significantly enhanced performance as anode for LIBs. The as-obtained Co3O4 NSAs with suitable thickness and abundant mesopores show excellent electrochemistry performance for LIBs, giving a high specific charge capacity of 2019.6 mAh g-1 at 0.1 A g-1, a good rate capability, and a remarkable cycling stability (1576.9 mAh g-1 after the 80th cycle), which is much superior to that of Co3O4 with thicker or thinner nanosheets as well as to that of the reported results. This facile strategy may be extended to the synthesis of other transition metal oxide NSAs, which can be potentially used in energy storage and conversion devices.

| S-EPMC6641328 | biostudies-literature

3D/2D Heterojunction of CeO2/Ultrathin MXene Nanosheets for Photocatalytic Hydrogen Production.

Project description:Two-dimensional (2D) nanomaterials benefit from the high specific surface area, unique surface properties, and quantum size effects, which have attracted widespread scientific attention. MXenes add many members to the 2D material family, mainly metal conductors, most of which are dielectrics, semiconductors, or semimetals. With excellent electron mobility, beneficial to electron-hole separation, and large functional groups that can be tightly coupled with other materials, MXenes have broad application prospects in photocatalysis. Meanwhile, the application of CeO2-based materials in organic catalysis, photocatalytic water splitting, and photodegradation of organic pollutants has been extensively explored, and studies have found that CeO2-based materials show good photocatalytic performance. In view of this, we synthesized regular octahedral CeO2 with a homojunction in one step by a hydrothermal method and compounded it with ultrathin 2D material MXene, which exhibited fast carrier migration efficiency and a good interfacial effect, making the material show excellent photocatalytic activity. The results showed that the photocatalytic H2 evolution performance of the MXene/CeO2 heterojunction was significantly improved. In this study, a low-cost catalyst with high photocatalytic activity was prepared, presenting a new research idea for achieving a combined 3D/2D photocatalytic system.

| S-EPMC9245096 | biostudies-literature

NiS2@rGO Nanosheet Wrapped with PPy Aerogel: A Sandwich-Like Structured Composite for Excellent Microwave Absorption.

Project description:To reduce electromagnetic pollution as well as increase the accuracy of high-precision electronic equipment, more attention has been paid to new electromagnetic wave (EMW) absorbing materials, which have the advantages of strong absorption, wide absorption bands, and a narrow thickness. In this study, a novel ternary type of the NiS2@rGO/polypyrrole (PPy) sandwich-like structured composites was synthesized via a facile two-step method, in which the hydrothermal method was used to prepare NiS2@rGO binary composites and then the in situ polymerization method was used to synthesize the PPy, which acted as the outer layer of the sandwich-like structure. The morphologies and electromagnetic absorption performance of the NiS2@rGO/PPy were measured and investigated. A sample with 6 wt% NiS2@rGO/PPy loading paraffin-composite obtained an outstanding reflection loss (RL) of -58.7 dB at 16.44 GHz under a thickness of 2.03 mm. Simultaneously, the effective electromagnetic wave absorption bandwidth for RL < -10 dB, which covered 7.04 to 18.00 GHz (10.96 GHz), was achieved by changing the thickness of the absorber from 2.0 to 3.5 mm. The results not only suggest that the NiS2@rGO/PPy composite has excellent performance in the field of EMW absorption but also prove that the novel sandwich-like structure can contribute to appropriate impedance matching through multiple relaxation and interfacial polarization processes.

| S-EPMC6630302 | biostudies-literature

Single atom tungsten doped ultrathin α-Ni(OH)2 for enhanced electrocatalytic water oxidation.

Project description:Electrocatalytic water oxidation is a rate-determining step in the water splitting reaction. Here, we report one single atom W6+ doped Ni(OH)2 nanosheet sample (w-Ni(OH)2) with an outstanding oxygen evolution reaction (OER) performance that is, in a 1 M KOH medium, an overpotential of 237 mV is obtained reaching a current density of 10 mA/cm2. Moreover, at high current density of 80 mA/cm2, the overpotential value is 267 mV. The corresponding Tafel slope is measured to be 33 mV/dec. The d0 W6+ atom with a low spin-state has more outermost vacant orbitals, resulting in more water and OH- groups being adsorbed on the exposed W sites of the Ni(OH)2 nanosheet. Density functional theory (DFT) calculations confirm that the O radical and O-O coupling are both generated at the same site of W6+. This work demonstrates that W6+ doping can promote the electrocatalytic water oxidation activity of Ni(OH)2 with the highest performance.

| S-EPMC6517434 | biostudies-literature

A Wire-Shaped Supercapacitor in Micrometer Size Based on Fe3O4 Nanosheet Arrays on Fe Wire.

Project description:One-dimensional (1D, wire- and fiber-shaped) supercapacitors have recently attracted interest due to their roll-up, micrometer size and potential applications in portable or wearable electronics. Herein, a 1D wire-shaped electrode was developed based on Fe3O4 nanosheet arrays connected on the Fe wire, which was prepared via oxidation of Fe wire in 0.1 M KCl solution (pH 3) with O2-rich environment under 70 °C. The obtained Fe3O4 nanosheet arrays displayed a high specific capacitance (20.8 mF cm-1 at 10 mV s-1) and long cycling lifespan (91.7% retention after 2500 cycles). The excellent performance may attribute to the connected nanosheet structure with abundant open spaces and the intimate contact between the Fe3O4 and iron substrate. In addition, a wire-shaped asymmetric supercapacitor was fabricated and had excellent capacitive properties with a high energy density (9 µWh cm-2) at power density of 532.7 µW cm-2 and remarkable long-term cycling performance (99% capacitance retention after 2000 cycles). Considering low cost and earth-abundant electrode material, as well as outstanding electrochemical properties, the assembled supercapacitor will possess enormous potential for practical applications in portable electronic device.

| S-EPMC6199038 | biostudies-literature

MoS2 Nanosheet Arrays Rooted on Hollow rGO Spheres as Bifunctional Hydrogen Evolution Catalyst and Supercapacitor Electrode.

Project description:MoS2 has attracted attention as a promising hydrogen evolution reaction (HER) catalyst and a supercapacitor electrode material. However, its catalytic activity and capacitive performance are still hindered by its aggregation and poor intrinsic conductivity. Here, hollow rGO sphere-supported ultrathin MoS2 nanosheet arrays (h-rGO@MoS2) are constructed via a dual-template approach and employed as bifunctional HER catalyst and supercapacitor electrode material. Because of the expanded interlayer spacing in MoS2 nanosheets and more exposed electroactive S-Mo-S edges, the constructed h-rGO@MoS2 architectures exhibit enhanced HER performance. Furthermore, benefiting from the synergistic effect of the improved conductivity and boosted specific surface areas (144.9 m2 g-1, ca. 4.6-times that of pristine MoS2), the h-rGO@MoS2 architecture shows a high specific capacitance (238 F g-1 at a current density of 0.5 A g-1), excellent rate capacitance, and remarkable cycle stability. Our synthesis method may be extended to construct other vertically aligned hollow architectures, which may serve both as efficient HER catalysts and supercapacitor electrodes.

| S-EPMC6199108 | biostudies-literature

Stabilizing an ultrathin MoS2 layer during electrocatalytic hydrogen evolution with a crystalline SnO2 underlayer.

Project description:Amorphous MoS2 has been investigated abundantly as a catalyst for hydrogen evolution. Not only its performance but also its chemical stability in acidic conditions have been reported widely. However, its adhesion has not been studied systematically in the electrochemical context. The use of MoS2 as a lubricant is not auspicious for this purpose. In this work, we start with a macroporous anodic alumina template as a model support, add an underlayer of SnO2 to provide electrical conduction and adhesion, then provide the catalytically active, amorphous MoS2 material by atomic layer deposition (ALD). The composition, morphology, and crystalline or amorphous character of all layers are confirmed by spectroscopic ellipsometry, X-ray photoelectron spectroscopy, grazing incidence X-ray diffractometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The electrocatalytic water reduction performance of the macroporous AAO/SnO2/MoS2 electrodes, quantified by voltammetry, steady-state chronoamperometry and electrochemical impedance spectroscopy, is improved by annealing the SnO2 layer prior to MoS2 deposition. Varying the geometric parameters of the electrode composite yields an optimized performance of 10 mA cm-2 at 0.22 V overpotential, with a catalyst loading of 0.16 mg cm-2. The electrode's stability is contingent on SnO2 crystallinity. Amorphous SnO2 allows for a gradual dewetting of the originally continuous MoS2 layer over wide areas. In stark contrast to this, crystalline SnO2 maintains the continuity of MoS2 until at least 0.3 V overpotential.

| S-EPMC8129885 | biostudies-literature

Synthesis of NiMn-LDH Nanosheet@Ni3S2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance.

Project description:One of the key challenges for pseudocapacitive electrode materials with highly effective capacitance output and future practical applications is how to rationally construct hierarchical and ordered hybrid nanoarchitecture through the simple process. Herein, we design and synthesize a novel NiMn-layered double hydroxide nanosheet@Ni3S2 nanorod hybrid array supported on porous nickel foam via a one-pot hydrothermal method. Benefited from the ultrathin and rough nature, the well-defined porous structure of the hybrid array, as well as the synergetic effect between NiMn-layered double hydroxide nanosheets and Ni3S2 nanorods, the as-fabricated hybrid array-based electrode exhibits an ultrahigh specific capacitance of 2703?F?g-1 at 3?A?g-1. Moreover, the asymmetric supercapacitor with this hybrid array as a positive electrode and wood-derived activated carbon as a negative electrode demonstrates high energy density (57?Wh Kg-1 at 738?W Kg-1) and very good electrochemical cycling stability.

| S-EPMC5869735 | biostudies-literature

Ultrathin Co3O4 nanosheet arrays with high supercapacitive performance.

Project description:Constructing nanostructures with desirable morphology and size is a critical issue for pursuing high performance electrode materials. Ultrathin Co3O4 nanosheet arrays, which are composed of well aligned uniform long-range (~5 ?m in length) and thin (~10 nm in thickness) nanosheets, with reasonable mass loading on Ni foam are prepared by a two-step hydrothermal reaction. As a supercapacitor electrode, a superior specific capacitance (~1782 F g(-1)) is obtained at current density of 1.8 A g(-1) (5 mA cm(-2)), much larger than that of the thicker nanostrucutures (~300 F g(-1)). The ultrathin nanosheet arrays electrode exhibits good rate capabilities, maintaining 51% of the initial capacity at current density of 30 mA cm(-2), and excellent long-term stability, remaining >90% of capacitance after 2000 cycles. Such high performance is attributed to the desirable morphologies, uniform architecture and high surface area. The results manifest that ultrathin Co3O4 nanosheet arrays are promising electrode material for supercapacitor in future application.

| S-EPMC3866630 | biostudies-literature