Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An Efficient Trap Passivator for Perovskite Solar Cells: Poly(propylene glycol) bis(2-aminopropyl ether).

ABSTRACT: Perovskite solar cells (PSCs) are regarded as promising candidates for future renewable energy production. High-density defects in the perovskite films, however, lead to unsatisfactory device performances. Here, poly(propylene glycol) bis(2-aminopropyl ether) (PEA) additive is utilized to passivate the trap states in perovskite. The PEA molecules chemically interact with lead ions in perovskite, considerably passivate surface and bulk defects, which is in favor of charge transfer and extraction. Furthermore, the PEA additive can efficiently block moisture and oxygen to prolong the device lifetime. As a result, PEA-treated MAPbI₃ (MA: CH₃NH₃) solar cells show increased power conversion efficiency (PCE) (from 17.18 to 18.87%) and good long-term stability. When PEA is introduced to (FAPbI₃)_1-x(MAPbBr₃)_x (FA: HC(NH₂)₂) solar cells, the PCE is enhanced from 19.66 to 21.60%. For both perovskites, their severe device hysteresis is efficiently relieved by PEA.

SUBMITTER: Chen N

PROVIDER: S-EPMC7770690 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Accelerated Water Desorption of Oligomeric Poly(ethylene glycol) by Addition of Poly(propylene glycol) for Energy-Efficient Water Recovery Systems.

Project description:Adsorbents are used to recover water vapor from the atmosphere in desiccant air conditioning (DAC) and atmospheric water harvesting (AWH) systems. Solid adsorbents have been conventionally used in these systems, though liquid adsorbents are considered to be more effective for energy-efficient fluidic thermosystems because of their low regeneration temperatures (45-70 °C). While most previous studies have focused on improving the adsorption performance, the desorption performance of adsorbents can also be a critical factor in improving the energy efficiency of these systems. Thus, this study aimed to improve the water desorption efficiency, focusing on the liquid adsorbents. We found that mixing hydrophobic molecules into a liquid adsorbent decreases the desorption temperature and increases the water-desorption efficiency. Oligomeric poly(ethylene glycol) (PEG), a common moisture-adsorbing liquid oligomer used in detergents and cosmetics, was selected as the liquid adsorbent. Oligomeric poly(propylene glycol) (PPG), which has a structure analogous to PEG and lower hygroscopicity, was selected as the hydrophobic molecule. Water adsorption and desorption experiments showed that the mixture of PPG with PEG promoted the desorption of water molecules beyond that of PEG, while thermogravimetric differential thermal analysis revealed a decrease in the water desorption temperature with increasing PPG content. The improved desorption efficiency was ascribed to the likely water adsorption equilibrium between PEG and PPG in the blend; water molecules are preferentially desorbed from PPG, which has weaker water-adsorbate interactions. The proposed concept is expected to be incorporated into various hygroscopic liquids to develop energy-efficient liquid adsorbents for DAC and AWH.

| S-EPMC10785649 | biostudies-literature

Transparent Polymer Blends of Poly(methyl methacrylate) and Poly(propylene glycol).

Project description:Polymer blends, obtained by polymerization of methyl methacrylate in the presence of poly(propylene glycol), are investigated. Poly(propylene glycol) acts as a plasticizer, significantly lowering poly(methyl methacrylate)'s glass transition temperature and decreasing its elasticity modulus and yield stress. The mixture of methyl methacrylate with poly(propylene glycol) is more stable than its mixture with currently used poly(ethylene glycol), which leads to more uniform distribution and higher possible content of the plasticizer. Unlike low molecular weight plasticizers, poly(propylene glycol) is less prone to migration and exudation during manufacturing process and in use, and has low toxicity. Dynamic mechanical thermal analysis, compression testing and X-ray diffraction were used to investigate how the properties of the material depend on the content and molecular weight of the poly(propylene glycol) in the polymer blend. It was shown that the dependence of the glass transition temperature of methyl methacrylate polymerized in the presence of poly(propylene glycol) on the molar fraction of propylene glycol units is linear, and poly(propylene glycol) with lower molecular weight affects properties of the material stronger than poly(propylene glycol) with higher molecular weight. Therefore, the addition of poly(propylene glycol) allows to control the properties of poly(methyl methacrylate) easily and within wide range.

| S-EPMC9183039 | biostudies-literature

Thermoresponsive Poly(?-Caprolactone)-Poly(Ethylene/Propylene Glycol) Copolymers as Injectable Hydrogels for Cell Therapies.

Project description:Injectable, thermoresponsive hydrogels are promising candidates for the delivery, maintenance and controlled release of adoptive cell therapies. Therefore, there is significant interest in the development of cytocompatible and biodegradable thermoresponsive hydrogels with appropriate gelling characteristics. Towards this end, a series of thermoresponsive copolymers consisting of poly(caprolactone) (PCL), poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG) segments, with various PEG:PPG ratios, were synthesised via ring-opening polymerisation (ROP) of ?-caprolactone and epoxy-functionalised PEG and PPG derivatives. The resultant PCL-PEG-PPG copolymers were characterised via proton nuclear magnetic resonance (1H NMR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The thermoresponsive characteristics of the aqueous copolymer solutions at various concentrations was investigated using the inversion method. Whilst all of the copolymers displayed thermoresponsive properties, the copolymer with a ratio of 1:2 PEG:PPG exhibited an appropriate sol-gel transition (28 °C) at a relatively low concentration (10 wt%), and remained a gel at 37 °C. Furthermore, the copolymers were shown to be enzymatically degradable in the presence of lipases and could be used for the encapsulation of CD4+ T-cell lymphocytes. These results demonstrate that the thermoresponsive PCL-PEG-PPG hydrogels may be suitable for use as an adoptive cell therapy (ACT) delivery vehicle.

| S-EPMC7077385 | biostudies-literature

5-Day Gavage Study of Propylene glycol phenyl ether (PPH; CASRN 770-35-4) in Male Harlan Sprague Dawley Rats

Project description:The goal of this study was to characterize the potential toxicity and genomic benchmark dose of propylene glycol phenyl etherl in liver and kidney of male Harlan Sprague Dawley rats using a 5 day dose-response toxicogenomics study design. The 5 day study is used to quickly identify the dose levels where changes in molecular pathways occur. These dose level where pathway level effects begin to occur have been shown to provide a close approximation of a no effect dose level from more resource intensive guideline toxicological assessments.

2015-12-31 | GSE75656 | GEO

Plasmon-induced trap filling at grain boundaries in perovskite solar cells.

Project description:The deep-level traps induced by charged defects at the grain boundaries (GBs) of polycrystalline organic-inorganic halide perovskite (OIHP) films serve as major recombination centres, which limit the device performance. Herein, we incorporate specially designed poly(3-aminothiophenol)-coated gold (Au@PAT) nanoparticles into the perovskite absorber, in order to examine the influence of plasmonic resonance on carrier dynamics in perovskite solar cells. Local changes in the photophysical properties of the OIHP films reveal that plasmon excitation could fill trap sites at the GB region through photo-brightening, whereas transient absorption spectroscopy and density functional theory calculations correlate this photo-brightening of trap states with plasmon-induced interfacial processes. As a result, the device achieved the best efficiency of 22.0% with robust operational stability. Our work provides unambiguous evidence for plasmon-induced trap occupation in OIHP and reveals that plasmonic nanostructures may be one type of efficient additives to overcome the recombination losses in perovskite solar cells and thin-film solar cells in general.

| S-EPMC8553803 | biostudies-literature

Highly efficient light management for perovskite solar cells.

Project description:Organic-inorganic halide perovskite solar cells have enormous potential to impact the existing photovoltaic industry. As realizing a higher conversion efficiency of the solar cell is still the most crucial task, a great number of schemes were proposed to minimize the carrier loss by optimizing the electrical properties of the perovskite solar cells. Here, we focus on another significant aspect that is to minimize the light loss by optimizing the light management to gain a high efficiency for perovskite solar cells. In our scheme, the slotted and inverted prism structured SiO2 layers are adopted to trap more light into the solar cells, and a better transparent conducting oxide layer is employed to reduce the parasitic absorption. For such an implementation, the efficiency and the serviceable angle of the perovskite solar cell can be promoted impressively. This proposal would shed new light on developing the high-performance perovskite solar cells.

| S-EPMC4702131 | biostudies-other

Enhancing the efficiency of planar heterojunction perovskite solar cells via interfacial engineering with 3-aminopropyl trimethoxy silane hydrolysate.

Project description:The interfacial compatibility between compact TiO2 and perovskite layers is critical for the performance of planar heterojunction perovskite solar cells (PSCs). A compact TiO2 film employed as an electron-transport layer (ETL) was modified using 3-aminopropyl trimethoxy silane (APMS) hydrolysate. The power conversion efficiency (PCE) of PSCs composed of an APMS-hydrolysate-modified TiO2 layer increased from 13.45 to 15.79%, which was associated with a significant enhancement in the fill factor (FF) from 62.23 to 68.04%. The results indicate that APMS hydrolysate can enhance the wettability of ?-butyrolactone (GBL) on the TiO2 surface, form a perfect CH3NH3PbI3 film, and increase the recombination resistance at the interface. This work demonstrates a simple but efficient method to improve the TiO2/perovskite interface that can be greatly beneficial for developing high-performance PSCs.

| S-EPMC5750005 | biostudies-literature

Controlled degradation of low-fouling poly(oligo(ethylene glycol)methyl ether methacrylate) hydrogels.

Project description:Degradable low-fouling hydrogels are ideal vehicles for drug and cell delivery. For each application, hydrogel degradation rate must be re-optimized for maximum therapeutic benefit. We developed a method to rapidly and predictably tune degradation rates of low-fouling poly(oligo(ethylene glycol)methyl ether methacrylate) (P(EG) x MA) hydrogels by modifying two interdependent variables: (1) base-catalysed crosslink degradation kinetics, dependent on crosslinker electronics (electron withdrawing groups (EWGs)); and, (2) polymer hydration, dependent on the molecular weight (M W) of poly(ethylene glycol) (PEG) pendant groups. By controlling PEG M W and EWG strength, P(EG) x MA hydrogels were tuned to degrade over 6 to 52 d. A 6-member P(EG) x MA copolymer library yielded slow and fast degrading low-fouling hydrogels suitable for short- and long-term delivery applications. The degradation mechanism was also applied to RGD-functionalized poly(carboxybetaine methacrylamide) (PCBMAA) hydrogels to achieve slow (∼50 d) and fast (∼13 d) degrading low-fouling, bioactive hydrogels.

| S-EPMC9064882 | biostudies-literature

NiO/Perovskite Heterojunction Contact Engineering for Highly Efficient and Stable Perovskite Solar Cells.

Project description:Recent research shows that the interface state in perovskite solar cells is the main factor which affects the stability and performance of the device, and interface engineering including strain engineering is an effective method to solve this issue. In this work, a CsBr buffer layer is inserted between NiO x hole transport layer and perovskite layer to relieve the lattice mismatch induced interface stress and induce more ordered crystal growth. The experimental and theoretical results show that the addition of the CsBr buffer layer optimizes the interface between the perovskite absorber layer and the NiO x hole transport layer, reduces interface defects and traps, and enhances the hole extraction/transfer. The experimental results show that the power conversion efficiency of optimal device reaches up to 19.7% which is significantly higher than the efficiency of the device without the CsBr buffer layer. Meanwhile, the device stability is also improved. This work provides a deep understanding of the NiO x /perovskite interface and provides a new strategy for interface optimization.

| S-EPMC7284208 | biostudies-literature

Highly efficient perovskite solar cells with tunable structural color.

Project description:The performance of perovskite solar cells has been progressing over the past few years and efficiency is likely to continue to increase. However, a negative aspect for the integration of perovskite solar cells in the built environment is that the color gamut available in these materials is very limited and does not cover the green-to-blue region of the visible spectrum, which has been a big selling point for organic photovoltaics. Here, we integrate a porous photonic crystal (PC) scaffold within the photoactive layer of an opaque perovskite solar cell following a bottom-up approach employing inexpensive and scalable liquid processing techniques. The photovoltaic devices presented herein show high efficiency with tunable color across the visible spectrum. This now imbues the perovskite solar cells with highly desirable properties for cladding in the built environment and encourages design of sustainable colorful buildings and iridescent electric vehicles as future power generation sources.

| S-EPMC4386463 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data