Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

MoS₂-Based Photodetectors Powered by Asymmetric Contact Structure with Large Work Function Difference.

ABSTRACT: Self-powered devices are widely used in the detection and sensing fields. Asymmetric metal contacts provide an effective way to obtain self-powered devices. Finding two stable metallic electrode materials with large work function differences is the key to obtain highly efficient asymmetric metal contacts structures. However, common metal electrode materials have similar and high work functions, making it difficult to form an asymmetric contacts structure with a large work function difference. Herein, Mo₂C crystals with low work function (3.8 eV) was obtained by chemical vapor deposition (CVD) method. The large work function difference between Mo₂C and Au allowed us to synthesize an efficient Mo₂C/MoS₂/Au photodetector with asymmetric metal contact structure, which enables light detection without external electric power. We believe that this novel device provides a new direction for the design of miniature self-powered photodetectors. These results also highlight the great potential of ultrathin Mo₂C prepared by CVD in heterojunction device applications.

SUBMITTER: Kang Z

PROVIDER: S-EPMC7770726 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Strain-Enhanced Large-Area Monolayer MoS2 Photodetectors.

Project description:In this study, we show a direct correlation between the applied mechanical strain and an increase in monolayer MoS2 photoresponsivity. This shows that tensile strain can improve the efficiency of monolayer MoS2 photodetectors. The observed high photocurrent and extended response time in our devices are indicative that devices are predominantly governed by photogating mechanisms, which become more prominent with applied tensile strain. Furthermore, we have demonstrated that a nonencapsulated MoS2 monolayer can be used in strain-based devices for many cycles and extensive periods of time, showing endurance under ambient conditions without loss of functionality. Such robustness emphasizes the potential of MoS2 for further functionalization and utilization of different flexible sensors.

| S-EPMC10982932 | biostudies-literature

Sulfurization engineering of single-zone CVD vertical and horizontal MoS2 on p-GaN heterostructures for self-powered UV photodetectors.

Project description:Molybdenum disulfide (MoS2) has been attracting considerable attention due to its excellent electrical and optical properties. We successfully grew high-quality, large-area and uniform few-layer (FL)-MoS2 on p-doped gallium nitride (p-GaN) using a simplified sulfurization technique by the single-zone CVD of a Mo seed layer via E-beam evaporation. Tuning the sulfurization parameters, namely temperature and duration, has been discovered to be an effective strategy for improving MoS2 orientation (horizontally aligned and vertically aligned) and quality, which affects photodetector (PD) performance. The increase in the sulfurization temperature to 850 °C results in improved structural quality and crystallite size. However, a prolonged sulfurization duration of 60 minutes caused the degradation of the film quality. The close lattice match between p-GaN and MoS2 contributes to the excellent quality growth of deposited MoS2. Following this, an n-MoS2/p-GaN heterostructure PD was successfully built by a MoS2 position-selectivity method. We report a highly sensitive and self-powered GaN/MoS2 p-n heterojunction PD with a relatively high responsivity of 14.3 A W-1, a high specific detectivity of 1.12 × 1013 Jones, and a fast response speed of 8.3/13.4 μs (20 kHz) under a UV light of 355 nm at zero-bias voltage. Our PD exhibits superior performance to that of the previously reported MoS2/GaN p-n PD. Our findings suggest a more efficient and straightforward approach to building high-performance self-powered UV PDs.

| S-EPMC9890942 | biostudies-literature

MoS2 and CdMoS4 nanostructure-based UV light photodetectors.

Project description:We have developed MoS2 nanosheets and CdMoS4 hierarchical nanostructures based on a UV light photodetector. The surface morphologies of the as-prepared samples were investigated via field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The performance parameters for the present photodetectors are investigated under the illumination of UV light having a wavelength of ∼385 nm. Upon the illumination of UV light, the CdMoS4-based photodetector device showed a better response to UV light compared to the MoS2 device in terms of photoresponsivity, response time (∼72 s) and recovery time (∼94 s). Our results reveal that CdMoS4 hierarchical nanostructures are practical for enhancing the device performance.

| S-EPMC9417253 | biostudies-literature

High-Speed Scalable Silicon-MoS2 P-N Heterojunction Photodetectors.

Project description:Two-dimensional molybdenum disulfide (MoS2) is a promising material for ultrasensitive photodetector owing to its favourable band gap and high absorption coefficient. However, their commercial applications are limited by the lack of high quality p-n junction and large wafer scale fabrication process. A high speed Si/MoS2 p-n heterojunction photodetector with simple and CMOS compatible approach has been reported here. The large area MoS2 thin film on silicon platform has been synthesized by sulfurization of RF-sputtered MoO3 films. The fabricated molecular layers of MoS2 on silicon offers high responsivity up to 8.75 A/W (at 580 nm and 3 V bias) with ultra-fast response of 10 μsec (rise time). Transient measurements of Si/MoS2 heterojunction under the modulated light reveal that the devices can function up to 50 kHz. The Si/MoS2 heterojunction is found to be sensitive to broadband wavelengths ranging from visible to near-infrared light with maximum detectivity up to ≈1.4 × 1012 Jones (2 V bias). Reproducible low dark current and high responsivity from over 20 devices in the same wafer has been measured. Additionally, the MoS2/Si photodetectors exhibit excellent stability in ambient atmosphere.

| S-EPMC5345101 | biostudies-literature

Improved Temporal Response of MoS2 Photodetectors by Mild Oxygen Plasma Treatment.

Project description:Temporal response is an important factor limiting the performance of two-dimensional (2D) material photodetectors. The deep trap states caused by intrinsic defects are the main factor to prolong the response time. In this work, it is demonstrated that the trap states in 2D molybdenum disulfide (MoS2) can be efficiently modulated by defect engineering through mild oxygen plasma treatment. The response time of the few-layer MoS2 photodetector is accelerated by 2-3 orders of magnitude, which is mainly attributed to the deep trap states that can be easily filled when O2 or oxygen ions are chemically bonded with MoS2 at sulfur vacancies (SV) sites. We characterized the defect engineering of plasma-exposed MoS2 by Raman, PL and electric properties. Under the optimal processing conditions of 30 W, 50 Pa and 30 s, we found 30-fold enhancements in photoluminescence (PL) intensity and a nearly 2-fold enhancement in carrier field-effect mobility, while the rise and fall response times reached 110 ms and 55 ms, respectively, at the illumination wavelength of 532 nm. This work would, therefore, offer a practical route to improve the performance of 2D dichalcogenide-based devices for future consideration in optoelectronics research.

| S-EPMC9031829 | biostudies-literature

High-Performance Photodetectors Based on MoTe2-MoS2 van der Waals Heterostructures.

Project description:Two-dimensional (2D) materials have got extensive attention for multifunctional device applications in advanced nanoelectronics and optoelectronics, such as field-effect transistors, photodiodes, and solar cells. In our work, we fabricated MoTe2-MoS2 van der Waals heterostructure photodetectors with great performance using the mechanical exfoliation method and restack technique. It is demonstrated that our MoTe2-MoS2 heterostructure photodetector device can operate without bias voltage, possessing a low dark current (10 pA) and high photocurrent on/off ratio (>104). Importantly, the room temperature photoresponsivity of the MoTe2-MoS2 photodetector can reach 110.6 and 9.2 mA W-1 under λ = 532 and 1064 nm incident laser powers, respectively. Our results indicate that the van der Waals heterostructure based on 2D semiconducting materials is expected to play an important role in nanoscale optoelectronic applications.

| S-EPMC8973031 | biostudies-literature

Mechanically rollable photodetectors enabled by centimetre-scale 2D MoS2 layer/TOCN composites.

Project description:Two-dimensional (2D) molybdenum disulfide (MoS2) layers are suitable for visible-to-near infrared photodetection owing to their tunable optical bandgaps. Also, their superior mechanical deformability enabled by an extremely small thickness and van der Waals (vdW) assembly allows them to be structured into unconventional physical forms, unattainable with any other materials. Herein, we demonstrate a new type of 2D MoS2 layer-based rollable photodetector that can be mechanically reconfigured while maintaining excellent geometry-invariant photo-responsiveness. Large-area (>a few cm2) 2D MoS2 layers grown by chemical vapor deposition (CVD) were integrated on transparent and flexible substrates composed of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNs) by a direct solution casting method. These composite materials in three-dimensionally rollable forms exhibited a large set of intriguing photo-responsiveness, well preserving intrinsic opto-electrical characteristics of the integrated 2D MoS2 layers; i.e., light intensity-dependent photocurrents insensitive to illumination angles as well as highly tunable photocurrents varying with the rolling number of 2D MoS2 layers, which were impossible to achieve with conventional photodetectors. This study provides a new design principle for converting 2D materials to three-dimensional (3D) objects of tailored functionalities and structures, significantly broadening their potential and versatility in futuristic devices.

| S-EPMC9416800 | biostudies-literature

Efficient MoWO3/VO2/MoS2/Si UV Schottky photodetectors; MoS2 optimization and monoclinic VO2 surface modifications.

Project description:The distinctive properties of strongly correlated oxides provide a variety of possibilities for modulating the properties of 2D transition metal dichalcogenides semiconductors; which represent a new class of superior optical and optoelectronic interfacing semiconductors. We report a novel approach to scaling-up molybdenum disulfide (MoS2) by combining the techniques of chemical and physical vapor deposition (CVD and PVD) and interfacing with a thin layer of monoclinic VO2. MoWO3/VO2/MoS2 photodetectors were manufactured at different sputtering times by depositing molybdenum oxide layers using a PVD technique on p-type silicon substrates followed by a sulphurization process in the CVD chamber. The high quality and the excellent structural and absorption properties of MoWO3/VO2/MoS2/Si with MoS2 deposited for 60 s enables its use as an efficient UV photodetector. The electronically coupled monoclinic VO2 layer on MoS2/Si causes a redshift and intensive MoS2 Raman peaks. Interestingly, the incorporation of VO2 dramatically changes the ratio between A-exciton (ground state exciton) and trion photoluminescence intensities of VO2/(30 s)MoS2/Si from < 1 to > 1. By increasing the deposition time of MoS2 from 60 to 180 s, the relative intensity of the B-exciton/A-exciton increases, whereas the lowest ratio at deposition time of 60 s refers to the high quality and low defect densities of the VO2/(60 s)MoS2/Si structure. Both the VO2/(60 s)MoS2/Si trion and A-exciton peaks have higher intensities compared with (60 s) MoS2/Si structure. The MoWO3/VO2/(60 s)MoS2/Si photodetector displays the highest photocurrent gain of 1.6, 4.32 × 108 Jones detectivity, and ~ 1.0 × 1010 quantum efficiency at 365 nm. Moreover, the surface roughness and grains mapping are studied and a low semiconducting-metallic phase transition is observed at ~ 40 °C.

| S-EPMC7522211 | biostudies-literature

Highly Sensitive MoS2 Photodetectors Enabled with a Dry-Transferred Transparent Carbon Nanotube Electrode.

Project description:Fabricating electronic and optoelectronic devices by transferring pre-deposited metal electrodes has attracted considerable attention, owing to the improved device performance. However, the pre-deposited metal electrode typically involves complex fabrication procedures. Here, we introduce our facile electrode fabrication process which is free of lithography, lift-off, and reactive ion etching by directly press-transferring a single-walled carbon nanotube (SWCNT) film. We fabricated Schottky diodes for photodetector applications using dry-transferred SWCNT films as the transparent electrode to increase light absorption in photoactive MoS2 channels. The MoS2 flake vertically stacked with an SWCNT electrode can exhibit excellent photodetection performance with a responsivity of ∼2.01 × 103 A/W and a detectivity of ∼3.2 × 1012 Jones. Additionally, we carried out temperature-dependent current-voltage measurement and Fowler-Nordheim (FN) plot analysis to explore the dominant charge transport mechanism. The enhanced photodetection in the vertical configuration is found to be attributed to the FN tunneling and internal photoemission of charge carriers excited from indium tin oxide across the MoS2 layer. Our study provides a novel concept of using a photoactive MoS2 layer as a tunneling layer itself with a dry-transferred transparent SWCNT electrode for high-performance and energy-efficient optoelectronic devices.

| S-EPMC9880956 | biostudies-literature

Fabrication of two Se/CsPbBr3 heterojunctions structures for self-powered UV-visible photodetectors.

Project description:It has been a universal route for enhanced photoelectric performance in photodetectors by constructing a heterojunction that is conductive for suppressing recombination of photogenerated carriers and promoting collection efficiency, and probably producing self-powered capability. However, the dependence of the built-in electric field distributions created by the heterojunction on photodetector performance has rarely been investigated. Herein, two kinds of self-powered UV-visible photodetectors with different device architectures based on single Se wire and CsPbBr3 particles are facilely fabricated and compared. It is found that both the two photodetectors show excellent self-powered operating properties, fast response and binary response. However, due to the different distributions of built-in electric field caused by device architectures, it yields a significant photovoltaic voltage distinction and different responsivity and detectivity spectra for the Se/CsPbBr3 photodetectors. These results are conductive to guide the design of self-powered heterojunction photodetectors by regulating the built-in electric field distributions.

| S-EPMC9685597 | biostudies-literature