Dataset Information

Accuracy of Patient-Specific 3D-Printed Drill Guides for Pedicle and Lateral Mass Screw Insertion: An Analysis of 76 Cervical and Thoracic Screw Trajectories.

ABSTRACT:

Study design

Single-center retrospective case series.

Objective

The purpose of this study was to assess the safety and accuracy of three-dimensional (3D)-printed individualized drill guides for pedicle and lateral mass screw insertion in the cervical and upper-thoracic region, by comparing the preoperative 3D surgical plan with the postoperative results.

Summary of background data

Posterior spinal fusion surgery can provide rigid intervertebral fixation but screw misplacement involves a high risk of neurovascular injury. However, modern spine surgeons now have tools such as virtual surgical planning and 3D-printed drill guides to facilitate spinal screw insertion.

Methods

A total of 15 patients who underwent posterior spinal fusion surgery involving patient-specific 3D-printed drill guides were included in this study. After segmentation of bone and screws, the postoperative models were superimposed onto the preoperative surgical plan. The accuracy of the realized screw trajectories was quantified by measuring the entry point and angular deviation.

Results

The 3D deviation analysis showed that the entry point and angular deviation over all 76 screw trajectories were 1.40?±?0.81?mm and 6.70?±?3.77°, respectively. Angular deviation was significantly higher in the sagittal plane than in the axial plane (P?=?0.02). All screw positions were classified as "safe" (100%), showing no neurovascular injury, facet joint violation, or violation of the pedicle wall.

Conclusions

3D virtual planning and 3D-printed patient-specific drill guides appear to be safe and accurate for pedicle and lateral mass screw insertion in the cervical and upper-thoracic spine. The quantitative 3D deviation analyses confirmed that screw positions were accurate with respect to the 3D-surgical plan.Level of Evidence: 4.

SUBMITTER: Pijpker PAJ

PROVIDER: S-EPMC7787187 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Accuracy of Patient-Specific 3D-Printed Drill Guides for Pedicle and Lateral Mass Screw Insertion: An Analysis of 76 Cervical and Thoracic Screw Trajectories.

Pijpker Peter A J PAJ Kraeima Joep J Witjes Max J H MJH Oterdoom D L Marinus DLM Vergeer Rob A RA Coppes Maarten H MH Groen Rob J M RJM Kuijlen Jos M A JMA

Spine 20210201 3

<h4>Study design</h4>Single-center retrospective case series.<h4>Objective</h4>The purpose of this study was to assess the safety and accuracy of three-dimensional (3D)-printed individualized drill guides for pedicle and lateral mass screw insertion in the cervical and upper-thoracic region, by comparing the preoperative 3D surgical plan with the postoperative results.<h4>Summary of background data</h4>Posterior spinal fusion surgery can provide rigid intervertebral fixation but screw misplaceme ...[more]

PMID: 33093310

Similar Datasets

Project description:BACKGROUND:To compare standalone oblique lateral interbody fusion (OLIF) vs. OLIF combined with posterior bilateral percutaneous pedicle screw fixation (OLIF combined) for the treatment of lumbar spondylolisthesis. METHODS:This was a retrospective study of patients who underwent standalone OLIF or combined OLIF between 07/2014 and 08/2017 at two hospitals in China. Direct decompressions were not performed. Visual analog scale (VAS), Oswestry Disability Index (ODI), satisfaction rate, anterior/posterior disc heights (DH), foraminal height (FH), foraminal width (FW), cage subsidence, cage retropulsion, fusion rate, and complications were analyzed. All imaging examinations were read independently by two physicians and the mean measurements were used for analysis. RESULTS:A total of 73 patients were included: 32 with standalone OLIF and 41 with combined OLIF. The total complication rate was 25.0% with standalone OLIF and 26.8% with combined OLIF. There were no differences in VAS and ODI scores by 2?years of follow-up, but the scores were better with standalone OLIF at 1?week and 3?months (P?<?0.05). PDH and FW was smaller in the combined OLIF group compared with the standalone OLIF group before and after surgery (all P?<?0.05). There were significant differences in FH before surgery and at 1?week and 3?months between the two groups (all P?<?0.05), but the difference disappeared by 2?years (P?=?0.111). Cage subsidence occurred in 7.3% (3/41) and 7.3% (3/41) of the patients at 3 and 24?months, respectively, in the combined OLIF group, compared with 6.3% (2/32) and 15.6% (5/32), respectively, in the standalone OLIF group at the same time points (P?=?0.287). There was no cage retropulsion in both groups at 2?years. The fusion rate was 85.4%(35/41) in the combined OLIF group and 84.4% (27/32) in the standalone OLIF group at 3?months(P?=?0.669). At 24?months, the fusion rate was 100.0% in the combined OLIF group and 93.8% (30/32) in the standalone OLIF group (P?=?0.066). CONCLUSION:Standalone OLIF may achieve equivalent clinical and radiological outcomes than OLIF combined with fixation for spondylolisthesis. The rate of complications was similar between the two groups. Patients who are osteoporotic might be better undergoing combined rather than standalone OLIF. The possibilty of proof lies within a future prospective study, preferably an RCT.

Project description:STUDY DESIGN: Systematic review. OBJECTIVE: To determine the effectiveness of using electromyography (EMG) during intraoperative pedicle screw placement in patients with thoracic deformity. METHODS: A systematic review of the English-language literature was undertaken for articles published between 1970 and July 2011. For our first question, we identified all articles that were designed to evaluate the diagnostic test characteristics (ie, measures of validity such as sensitivity, specificity, positive predictive value [PPV], negative predictive value [NPV]) of EMG for thoracic deformities in adolescent and adult patients. For our second question, we attempted to identify all articles that reported complication rates (pedicle wall breach or new neurological event) after pedicle screw placement in the same population comparing patients who did and did not undergo intraoperative EMG. Articles were excluded if they did not report or give raw data to calculate at least one of the four primary diagnostic test characteristics: sensitivity, specificity, PPV, or NPV for study question one. Articles were excluded if they did not have a "no EMG" control group for study question two. Other exclusions were reviews, editorials, case reports, non-English written studies, and animal studies. We rated the overall body of evidence with respect to each key question using a modified Grades of Recommendation Assessment, Development and Evaluation (GRADE) system for diagnostic and therapeutic studies. RESULTS: The overall strength of evidence evaluating the diagnostic characteristics was low due to inconsistent findings between studies and uncertainty of the impact of false-negatives. The fairly low sensitivity may lead to a high-false negative rate. It is unclear what the impact of false-negatives would be since no neurological injuries were identified in the studies summarized. A higher specificity would suggest a fairly low false-positive rate; however, the rates could be as high as 30%. If sudden changes in treatment are required in the absence of any adverse event, this could be considered a limitation of such testing. The overall strength of evidence for evaluating the efficacy of EMG compared with no EMG was insufficient because of literature shortage on this topic. CONCLUSION: The overall strength of evidence evaluating the diagnostic characteristics was low due to inconsistent findings between studies and uncertainty of the impact of false-negatives. Given the low sensitivity and potential high rate of false-negatives, pedicle wall breaches may occur, without EMG notification. These undetected breaches may lead to loose or weak screw position which may lead to neurovascular complications during or after a translation-rotation maneuver, especially in rigid deformities. The higher sensitivity would suggest a lower rate of false-positives. We recommend considering the use of intraoperative EMG-monitoring method to help identify potential complications based upon available technology, personal experiences and preferences; however, surgeons should keep in mind that false-positive results may lead to increased surgery time and increased blood loss. The surgeon should not depend solely on EMG since it can also render false-negatives.

Dataset Information

Accuracy of Patient-Specific 3D-Printed Drill Guides for Pedicle and Lateral Mass Screw Insertion: An Analysis of 76 Cervical and Thoracic Screw Trajectories.

Study design

Objective

Summary of background data

Methods

Results

Conclusions

Publications

Accuracy of Patient-Specific 3D-Printed Drill Guides for Pedicle and Lateral Mass Screw Insertion: An Analysis of 76 Cervical and Thoracic Screw Trajectories.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets