Dataset Information

Improved differentiation between primary lung cancer and pulmonary metastasis by combining dual-energy CT-derived biomarkers with conventional CT attenuation.

ABSTRACT:

Objectives

To assess the clinical utility of dual-energy CT (DE-CT)-derived iodine concentration (IC) and effective Z (Z^eff) in addition to conventional CT attenuation (HU) for the discrimination between primary lung cancer (LC) and pulmonary metastases (PM) from different primary malignancies.

Methods

DE-CT scans of 79 patients with LC (3 histopathologic subgroups) and 89 patients with PM (5 histopathologic subgroups) were evaluated. Quantitative IC, Z^eff, and conventional HU values were extracted and normalized to the thoracic aorta. Differences between groups were assessed by pairwise Welch's t test. Correlation and linear regression analyses were used to examine the relationship of imaging parameters in LC and PM. Diagnostic accuracy was measured by the area under receiver operator characteristic curve (AUC) and validated based on resampling methods.

Results

Significant differences between subgroups of LC and PMs were noted for all imaging parameters, with the highest number of significant pairs for IC. In univariate analysis, only IC was a significant diagnostic feature for discriminating LC from PM (p = 0.03). All quantitative imaging parameters correlated significantly (p < 0.0001, respectively), with the highest correlation between IC and Z^eff (r = 0.91), followed by IC and HU (r = 0.76) and Z^eff and HU (r = 0.73). Diagnostic models combining IC or Z^eff with HU (IC+HU: AUC = 0.73; Z^eff+HU: AUC = 0.69; IC+Z^eff+HU: AUC = 0.73) were not significantly different and outperformed individual parameters (IC: AUC = 0.57; Z^eff: AUC = 0.57; HU: AUC = 0.55) in diagnostic accuracy (p < 0.05, respectively).

Conclusion

DE-CT-derived IC or Z^eff and conventional HU represent complementary imaging parameters, which, if used in combination, may improve the differentiation between LC and PM.

Key points

• Individual quantitative imaging parameters derived from DE-CT (iodine concentration, effective Z) and conventional CT (HU) provide complementary diagnostic information for the differentiation of primary lung cancer and pulmonary metastases. • A combination of conventional HU and DE-CT parameters enhances the diagnostic utility of individual parameters.

SUBMITTER: Deniffel D

PROVIDER: S-EPMC7813728 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Improved differentiation between primary lung cancer and pulmonary metastasis by combining dual-energy CT-derived biomarkers with conventional CT attenuation.

Deniffel Dominik D Sauter Andreas A Fingerle Alexander A Rummeny Ernst J EJ Makowski Marcus R MR Pfeiffer Daniela D

European radiology 20200828 2

<h4>Objectives</h4>To assess the clinical utility of dual-energy CT (DE-CT)-derived iodine concentration (IC) and effective Z (Z<sup>eff</sup>) in addition to conventional CT attenuation (HU) for the discrimination between primary lung cancer (LC) and pulmonary metastases (PM) from different primary malignancies.<h4>Methods</h4>DE-CT scans of 79 patients with LC (3 histopathologic subgroups) and 89 patients with PM (5 histopathologic subgroups) were evaluated. Quantitative IC, Z<sup>eff</sup>, a ...[more]

PMID: 32856165

Similar Datasets

Project description:The authors evaluate the energy dependent noise and bias properties of monoenergetic images synthesized from dual-energy CT (DECT) acquisitions. These monoenergetic images can be used to estimate attenuation coefficients at energies suitable for positron emission tomography (PET) and single-photon emission computed tomography (SPECT) imaging. This is becoming more relevant with the increased use of quantitative imaging by PET/CT and SPECT/CT scanners. There are, however, potential variations in the noise and bias of synthesized monoenergetic images as a function of energy.The authors used analytic approximations and simulations to estimate the noise and bias of synthesized monoenergetic images of water-filled cylinders with different shapes and the NURBS-based cardiac-torso (NCAT) phantom from 40 to 520 keV, the range of SPECT and PET energies. The dual-kVp spectra were based on the GE Lightspeed VCT scanner at 80 and 140 kVp with added filtration of 0.5 mm Cu. The authors evaluated strategies of noise suppression with sinogram smoothing and dose minimization with reduction of tube currents at the two kVp settings. The authors compared the impact of DECT-based attenuation correction with single-kVp CT-based attenuation correction on PET quantitation for the NCAT phantom for soft tissue and high-Z materials of bone and iodine contrast enhancement.Both analytic calculations and simulations displayed the expected minimum noise value for a synthesized monoenergetic image at an energy between the mean energies of the two spectra. In addition the authors found that the normalized coefficient of variation in the synthesized attenuation map increased with energy but reached a plateau near 160 keV, and then remained constant with increasing energy up to 511 keV and beyond. The bias was minimal, as the linear attenuation coefficients of the synthesized monoenergetic images were within 2.4% of the known true values across the entire energy range. Compared with no sinogram smoothing, sinogram smoothing can dramatically reduce noise in the DECT-derived attenuation map. Through appropriate selection of tube currents for high and low kVp scans, DECT can deliver roughly the same amount of radiation dose as that of a single kVp CT scan, but could be used for PET attenuation correction with reduced bias in contrast agent regions by a factor of ≈ 2.6 and slightly reduced RMSE for the total image.When DECT is used for attenuation correction at higher energies, there is a noise amplification that is dependent on the energy of the synthesized monoenergetic image of linear attenuation coefficients. Sinogram smoothing reduces the noise amplification in DECT-derived attenuation maps without increasing bias. With an appropriate selection of CT techniques, a DECT scan with the same radiation dose as a single CT scan can result in a PET image with improved quantitative accuracy.

Project description:PurposeTo evaluate pulmonary hypertension (PH) determination by dual-phase dual-energy CT pulmonary angiography vascular enhancement and perfused blood volume (PBV) quantification.Materials and methodsIn this prospective study, consecutive participants who underwent both right heart catheterization and dual-phase dual-energy CT pulmonary angiography were included between 2012 and 2014. CT evaluation comprised a standard pulmonary arterial phase dual-energy CT pulmonary angiography acquisition (termed series 1) followed 7 seconds after series 1 completion by a second dual-energy CT pulmonary angiography acquisition limited to the central 10 cm of the pulmonary vasculature (termed series 2). In both series, enhancement in the main pulmonary artery (PAenh), the descending aorta (DAenh), and whole-lung PBV (WLenh) was calculated from dual-energy CT pulmonary angiography iodine images. Dual-energy CT pulmonary angiography and standard cardiovascular metrics were correlated to mean pulmonary artery pressure (mPAP) and pulmonary vascular resistance (PVR) with additional receiver operating characteristic curve analysis.ResultsA total of 102 participants (median age, 70; range, 58-78 years; 60 women) were included. Sixty-five participants had PH defined by mPAP of greater than or equal to 25 mm Hg, and 51 participants had PH defined by PVR of greater than 3 Wood units. By either definition, participants with PH had higher PAenh/WLenh ratio and lower WLenh and DAenh in series 1 (P < .05) and higher PAenh and WLenh in series 2 (P < .05). Change in WLenh determined highest diagnostic accuracy to define disease by mPAP (area under the receiver operating characteristic curve [AUC], 0.78) and PVR (AUC, 0.79) and the best mPAP correlation (r = 0.62). PAenh series 2 correlated best with PVR (r = 0.49). Multiple linear regression analysis incorporating WLenh and series 1 DAenh improved PVR correlation (r = 0.56). Combining these dual-energy CT pulmonary angiography metrics with main pulmonary artery size and right-to-left ventricular ratio achieved the highest correlations (mPAP, r = 0.71; PVR, r = 0.64).ConclusionDual-phase dual-energy CT pulmonary angiography enhancement quantification appears to improve mPAP and PVR prediction in noninvasive PH evaluation.Supplemental material is available for this article.See also the commentary by Kay in this issue.© RSNA, 2020.

Project description:ObjectivesTo evaluate inter- and intra- scan mode and scanner repeatability and reproducibility of radiomics features within and between single-energy CT (SECT) and dual-energy CT (DECT).MethodsA standardized phantom with sixteen rods of clinical-relevant densities was scanned on seven DECT-capable scanners and three SECT-only scanners. The acquisition parameters were selected to present typical abdomen-pelvic examinations with the same voxel size. Images of SECT at 120 kVp and corresponding 120 kVp-like virtual monochromatic images (VMIs) in DECT which were generated according to scanners were analyzed. Regions of interest were drawn with rigid registrations to avoid variations due to segmentation. Radiomics features were extracted via Pyradiomics platform. Test-retest repeatability was evaluated by Bland-Altman analysis for repeated scans. Intra-scanner reproducibility for different scan modes was tested by intraclass correlation coefficient (ICC) and concordance correlation coefficient (CCC). Inter-scanner reproducibility among different scanners for same scan mode was assessed by coefficient of variation (CV) and quartile coefficient of dispersion (QCD).ResultsThe test-retest analysis presented that 92.91% and 87.02% of the 94 assessed features were repeatable for SECT 120kVp and DECT 120 kVp-like VMIs, respectively. The intra-scanner analysis for SECT 120kVp vs DECT 120 kVp-like VMIs demonstrated that 10.76% and 10.28% of features were with ICC > 0.90 and CCC > 0.90, respectively. The inter-scanner analysis showed that 17.09% and 27.73% of features for SECT 120kVp were with CV < 10% and QCD < 10%, and 15.16% and 32.78% for DECT 120 kVp-like VMIs, respectively.ConclusionsThe majority of radiomics features were non-reproducible within and between SECT and DECT.Key points• Although the test-retest analysis showed high repeatability for radiomics features, the overall reproducibility of radiomics features within and between SECT and DECT was low. • Only about one-tenth of radiomics features extracted from SECT images and corresponding DECT images did match each other, even their average photon energy levels were considered alike, indicating that the scan mode potentially altered the radiomics features. • Less than one-fifth of radiomics features were reproducible among multiple SECT and DECT scanners, regardless of their fixed acquisition and reconstruction parameters, suggesting the necessity of scanning protocol adjustment and post-scan harmonization process.

Project description:High-attenuation pulmonary abnormalities are commonly seen on CT. These findings are increasingly encountered with the growing number of CT examinations and the wide availability of thin-slice images. The abnormalities include benign lesions, such as infectious granulomatous diseases and metabolic diseases, and malignant tumors, such as lung cancers and metastatic tumors. Due to the wide spectrum of diseases, the proper diagnosis of high-attenuation abnormalities can be challenging. The assessment of these abnormal findings requires scrutiny, and the treatment is imperative. Our proposed stepwise diagnostic algorithm consists of five steps. Step 1: Establish the presence or absence of metallic artifacts. Step 2: Identify associated nodular or mass-like soft tissue components. Step 3: Establish the presence of solitary or multiple lesions if identified in Step 2. Step 4: Ascertain the predominant distribution in the upper or lower lungs if not identified in Step 2. Step 5: Identify the morphological pattern, such as linear, consolidation, nodular, or micronodular if not identified in Step 4. These five steps to diagnosing high-attenuation abnormalities subdivide the lesions into nine categories. This stepwise radiologic diagnostic approach could help to narrow the differential diagnosis for various pulmonary high-attenuation abnormalities and to achieve a precise diagnosis.Critical relevance statement Our proposed stepwise diagnostic algorithm for high-attenuation pulmonary abnormalities may help to recognize a variety of those high-attenuation findings, to determine whether the associated diseases require further investigation, and to guide appropriate patient management. Key points • To provide a stepwise diagnostic approach to high-attenuation pulmonary abnormalities.• To familiarize radiologists with the varying cause of high-attenuation pulmonary abnormalities.• To recognize which high-attenuation abnormalities require scrutiny and prompt treatment.

Dataset Information

Improved differentiation between primary lung cancer and pulmonary metastasis by combining dual-energy CT-derived biomarkers with conventional CT attenuation.

Objectives

Methods

Results

Conclusion

Key points

Publications

Improved differentiation between primary lung cancer and pulmonary metastasis by combining dual-energy CT-derived biomarkers with conventional CT attenuation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets