Dataset Information

Multi-analyser detector (MAD) for high-resolution and high-energy powder X-ray diffraction.

ABSTRACT: For high-resolution powder diffraction in material science, high photon energies are necessary, especially for in situ and in operando experiments. For this purpose, a multi-analyser detector (MAD) was developed for the high-energy beamline P02.1 at PETRA III of the Deutsches Elektronen-Synchrotron (DESY). In order to be able to adjust the detector for the high photon energies of 60?keV, an individually adjustable analyser-crystal setup was designed. The adjustment is performed via piezo stepper motors for each of the ten channels. The detector shows a low and flat background as well as a high signal-to-noise ratio. A range of standard materials were measured for characterizing the performance. Two exemplary experiments were performed to demonstrate the potential for sophisticated structural analysis with the MAD: (i) the structure of a complex material based on strontium niobate titanate and strontium niobate zirconate was determined and (ii) an in situ stroboscopy experiment with an applied electric field on a highly absorbing piezoceramic was performed. These experiments demonstrate the capabilities of the new MAD, which advances the frontiers of the structural characterization of materials.

SUBMITTER: Schokel A

PROVIDER: S-EPMC7842216 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Multi-analyser detector (MAD) for high-resolution and high-energy powder X-ray diffraction.

Schökel Alexander A Etter Martin M Berghäuser Andreas A Horst Alexander A Lindackers Dirk D Whittle Thomas A TA Schmid Siegbert S Acosta Matias M Knapp Michael M Ehrenberg Helmut H Hinterstein Manuel M

Journal of synchrotron radiation 20210101 Pt 1

For high-resolution powder diffraction in material science, high photon energies are necessary, especially for in situ and in operando experiments. For this purpose, a multi-analyser detector (MAD) was developed for the high-energy beamline P02.1 at PETRA III of the Deutsches Elektronen-Synchrotron (DESY). In order to be able to adjust the detector for the high photon energies of 60 keV, an individually adjustable analyser-crystal setup was designed. The adjustment is performed via piezo stepper ...[more]

PMID: 33399563

Similar Datasets

Project description:In a test experiment, a two-dimensional pixel detector was mounted on the nine-channel multi-analyzer stage of the high-resolution powder diffraction beamline ID22 at the ESRF. This detector replaces a bank of scintillation counters that detect the diffracted intensity passing via the analyzer crystals as the diffractometer arm is scanned. At each diffractometer detector arm angle 2Θ, a 2D image is recorded that displays nine distinct regions of interest corresponding to the diffraction signals transmitted by each of the analyzer crystals. Summing pixels from within each region of interest allows the diffracted intensity to be extracted for each channel. X-rays are diffracted from the sample at various angles, 2θ, into Debye-Scherrer cones. Depending on the azimuthal angle around the cone, diffracted photons satisfy the analyzer-crystal Bragg condition at different diffractometer 2Θ values and arrive on the detector at different horizontal (axial) positions. The more the azimuthal angle deviates from diffraction in the vertical plane, the lower the 2Θ angle at which it is transmitted by an analyzer crystal, and the greater the distance of the detecting pixel from the centerline of the detector. This paper illustrates how the axial resolution afforded by the pixel detector can be used to correct the apparent diffraction angle, 2Θ, given by the diffractometer arm to its true diffraction angle, 2θ. This allows a reduction in peak asymmetry at low angle, and even with a relatively small axial acceptance, the correction leads to narrower peaks than if no correction is applied. By varying axial acceptance with diffraction angle, it is possible to optimize angular resolution at low diffraction angles and counting statistics at high angles. In addition, there is an intrinsic peak broadening with increasing azimuthal angle, dependent on the axial beam and detector pixel sizes. This effect reduces with 2θ, as the curvature of the Debye-Scherrer cones decreases. This broadening can be estimated and used to help choose the axial range to include as a function of diffraction angle.

Project description:In this paper, we report the results of the first study focused on the thermal stability and dehydration dynamics of the natural zeolite mineral ferrierite. A sample from Monastir, Sardinia [(Na0.56K1.19Mg2.02Ca0.52Sr0.14) (Al6.89Si29.04)O72·17.86H2O; a = 19.2241(3) Å; b = 14.1563(2) Å; c = 7.5106(1) Å, V = 2043.95(7) Å3] was investigated by thermogravimetric analysis and in-situ synchrotron X-ray powder diffraction. Thermogravimetric data show that H2O release begins already in the range 50-100 °C and is complete at ~600 °C. The results of the structure refinements performed in Immm space group by Rietveld analysis with data collected up to 670 °C show that ferrierite belongs to the group of zeolites that do not undergo phase transitions. Upon heating to 670 °C, ferrierite behaves as a non-collapsible structure displaying only a slight contraction of the unit-cell volume (?V = -3%). The unit-cell parameter reductions are anisotropic, more pronounced for a than for b and c (?a = -1.6%; ?b = -0.76%; ?c = -0.70%). This anisotropic response to a temperature increase is interpreted as due to the presence in the ferrierite framework of five-membered ring chains of SiO4 tetrahedra, which impart a higher structural rigidity along b and c. Upon dehydration we observe: (1) the gradual H2O loss, beginning with the molecules hosted in the 10MR channel, is almost complete at 670 °C, in good agreement with the TG data; (2) as a consequence of the decreased H2O content, Mg and K migrate from their original positions, moving from the center of the 10MR channel toward the walls to coordinate the framework oxygen atoms. The observation of transmission electron microscopy selected-area electron diffraction patterns revealed defective crystals with an occasional and moderate structural disorder. Beyond providing information on the thermal stability and behavior of natural ferrierite, the results of this work have significant implications for possible technological applications. These data allow for comparison with the dehydration kinetics/mechanisms of the corresponding synthetic phases, clarifying the role played by framework and extra-framework species on the high-temperature behavior of porous materials with ferrierite topology. Moreover, the information on the thermal behavior of natural ferrierite can be used to predict the energetic performances of analogous synthetic Si-pure counterparts, namely "zeosil-electrolyte" systems, under non-ambient conditions. Specifically, the very high thermal stability of ferrierite determined in this study, coupled with the baric behavior determined in other investigations, suggests that the "Si-FER-electrolyte" system may be an excellent candidate for use as an energy reservoir. Indeed, ferrierite exhibits the so-called "spring behavior," i.e., upon compression in water or in an electrolyte solution, it converts the mechanical energy into interfacial energy, and-when pressure is released-it can completely restore the supplied mechanical energy accumulated during the compression step.

Dataset Information

Multi-analyser detector (MAD) for high-resolution and high-energy powder X-ray diffraction.

Publications

Multi-analyser detector (MAD) for high-resolution and high-energy powder X-ray diffraction.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets