Characterization of the Percival detector with soft X-rays.
Ontology highlight
ABSTRACT:
SUBMITTER: Marras A
PROVIDER: S-EPMC7842225 | biostudies-literature | 2021 Jan
REPOSITORIES: biostudies-literature
Publications
Characterization of the Percival detector with soft X-rays.
Marras Alessandro A Correa Jonathan J Lange Sabine S Vardanyan Vahagn V Gerhardt Tim T Kuhn Manuela M Krivan Frantisek F Shevyakov Igor I Zimmer Manfred M Hoesch Moritz M Bagschik Kai K Scholz Frank F Guerrini Nicola N Marsh Ben B Sedgwick Iain I Cautero Giuseppe G Giuressi Dario D Iztok Gregori G Menk Ralf H RH Scarcia Martin M Stebel Luigi L Nicholls Tim T Nichols William W Pedersen Ulrik K UK Shikhaliev Polad P Tartoni Nicola N Hyun HyoJung H Kim SeongHan S Kim KyungSook K Rah SeungYu S Dawiec Arkadiusz A Orsini Fabienne F Pinaroli Giovanni G Greer Alan A Aplin Steve S Jewell April D AD Jones Todd J TJ Nikzad Shouleh S Hoenk Michael E ME Okrent Frank F Graafsma Heinz H Wunderer Cornelia B CB
Journal of synchrotron radiation 20210101 Pt 1
In this paper the back-side-illuminated Percival 2-Megapixel (P2M) detector is presented, along with its characterization by means of optical and X-ray photons. For the first time, the response of the system to soft X-rays (250 eV to 1 keV) is presented. The main performance parameters of the first detector are measured, assessing the capabilities in terms of noise, dynamic range and single-photon discrimination capability. Present limitations and coming improvements are discussed. ...[more]
Similar Datasets
Project description:Polyamide nanomembranes are at the heart of water desalination, a process which plays a critical role in clean water production. Improving their efficiency requires a better understanding of the relationship between chemistry, network structure, and performance but few techniques afford compositional information in ultrathin films (<100 nm). Here, we leverage resonant soft x-ray reflectivity, a measurement that is sensitive to the specific chemical bonds in organic materials, to quantify the functional group concentration in these polyamides. We first employ reference materials to establish quantitative relationships between changes in the optical constants and functional group density, and then use the results to evaluate the functional group concentrations of polyamide nanomembranes. We demonstrate that the difference in the amide carbonyl and carboxylic acid group concentrations can be used to calculate the crosslink density, which is shown to vary significantly across three different polyamide chemistries. A clear relationship is established between the functional group density and the permselectivity (?), indicating that more densely crosslinked materials result in a higher ? of the nanomembranes. Finally, measurements on a polyamide/poly(acrylic acid) bilayer demonstrate the ability of this approach to quantify depth-dependent functional group concentrations in thin films.
| S-EPMC5997296 | biostudies-literature
Project description:The refractive index of a y-cut SiO2 crystal surface is reconstructed from orientation-dependent soft X-ray reflectometry measurements in the energy range from 45 to 620 eV. Owing to the anisotropy of the crystal structure in the (100) and (001) directions, a significant deviation of the measured reflectance at the Si L 2,3 and O K absorption edges is observed. The anisotropy in the optical constants reconstructed from these data is also confirmed by ab initio Bethe-Salpeter equation calculations for the O K edge. This new experimental data set expands the existing literature data for quartz crystal optical constants significantly, particularly in the near-edge regions.
| S-EPMC8056758 | biostudies-literature
Project description:We report, for the first time, the generation of high-order harmonics in a spectral range between 200 eV and 1 keV with an unusual spectral property: only every 4(th) (4i + 1, i∈ℵ) harmonic line appears, whereas the usual high-harmonic spectra consist of every odd (2i + 1) harmonic. We attribute this unique property to the quantum path interference of two extended electron trajectories that experience multiple re-scattering. In the well-established theory, electrons emitted via tunnel ionisation are accelerated by a laser field, return to the ion and recombine. The acceleration typically lasts for less than one optical cycle, and the electrons radiate in the extreme ultraviolet range at recombination. In contrast, for extended trajectories, electrons are accelerated over two or more optical cycles. Here, we demonstrate that two sets of trajectories dominate and provide substantial contributions to the generated soft X-ray radiation because they fulfil the resonance condition for X-ray parametric amplification.
| S-EPMC3937789 | biostudies-other
Project description:PurposeDosimetric properties of the new microSilicon diode detector (60023) have been studied with focus on application in small-field dosimetry. The influences of the dimensions of the sensitive volume and the density of the epoxy layer surrounding the silicon chip of microSilicon have been quantified and compared to its predecessor (Diode E 60017) and the microDiamond (60019, all PTW-Freiburg, Germany).MethodsDose linearity has been studied in the range from 0.01 to 8.55 Gy and dose-per-pulse dependence from 0.13 to 0.86 mGy/pulse. The effective point of measurement (EPOM) was determined by comparing measured percentage depth dose curves with a reference curve (Roos chamber). Output ratios were measured for nominal field sizes from 0.5 × 0.5 cm2 to 4 × 4 cm2 . The corresponding small-field output correction factors, k, were derived with a plastic scintillation detector as reference. The lateral dose-response function, K(x), was determined using a slit beam geometry.ResultsMicroSilicon shows linear dose response (R2 = 1.000) in both low and high dose range up to 8.55 Gy with deviations of only up to 1% within the dose-per-pulse values investigated. The EPOM was found to lie (0.7 ± 0.2) mm below the front detector's surface. The derived k for microSilicon (0.960 at seff = 0.55 cm) is similar to that of microDiamond (0.956), while Diode E requires larger corrections (0.929). This improved behavior of microSilicon in small-fields is reflected in the slightly wider K(x) compared to Diode E. Furthermore, the amplitude of the negative values in K(x) at the borders of the sensitive volume has been reduced.ConclusionsCompared to its predecessor, microSilicon shows improved dosimetric behavior with higher sensitivity and smaller dose-per-pulse dependence. Profile measurements demonstrated that microSilicon causes less perturbation in off-axis measurements. It is especially suitable for the applications in small-field output factors and profile measurements.
| S-EPMC6852691 | biostudies-literature
Project description:This study characterized a new unshielded diode detector, the microSilicon (model 60023), for small-field photon beam dosimetry by evaluating the photon beams generated by a TrueBeam STx and a CyberKnife. Temperature dependence was evaluated by irradiating photons and increasing the water temperature from 11.5 to 31.3°C. For Diode E, microSilicon, microDiamond and EDGE detectors, dose linearity, dose rate dependence, energy dependence, percent-depth-dose (PDD), beam profiles and detector output factor (OFdet) were evaluated. The OFdet of the microSilicon detector was compared to the field output factors of the other detectors. The microSilicon exhibited small temperature dependence within 0.4%, although the Diode E showed a linear variation with a ratio of 0.26%/°C. The Diode E and EDGE detectors showed positive correlations between the detector reading and dose rate, whereas the microSilicon showed a stable response within 0.11%. The Diode E and microSilicon demonstrated negative correlations with the beam energy. The OFdet of microSilicon was the smallest among all the detectors. The maximum differences between the OFdet of microSilicon and the field output factors of microDiamond were 2.3 and 1.6% for 5 × 5 mm2 TrueBeam and 5 mm ? CyberKnife beams, respectively. The PDD data exhibited small variations in the dose fall-off region. The microSilicon and microDiamond detectors yielded similar penumbra widths, whereas the other detectors showed steeper penumbra profiles. The microSilicon demonstrated favorable characteristics including small temperature and dose rate dependence as well as the small spatial resolution and output factors suitable for small field dosimetry.
| S-EPMC7299273 | biostudies-literature
Project description:Phyllostachys pubescens leaves are cultivated in a number of Asian countries and have been used for antipyretic and diuretic effects since ancient times, especially in Korea. The purpose of this study was to develop and validate of analytical method for quality control of P. pubescens leaves using high-performance liquid chromatography with diode array detector (HPLC-DAD) and liquid chromatography with tandem mass spectrometry (LC-MS/MS) detection. HPLC-DAD analysis was conducted with a Gemini C18 column, and distilled water-acetonitrile (both with 0.1% (v/v) formic acid) mobile-phase system. For the LC-MS/MS analysis, all markers were separated with a Waters ACQUITY UPLC BEH C18 column and gradient flow system of distilled water containing 0.1% (v/v) formic acid and 5 mM ammonium formate-acetonitrile. In both method, major components were detected at 2.13-11.63 mg/g (HPLC-DAD) and 0.12-19.20 mg/g (LC-MS/MS). These methods were validated with respect to linearity (coefficient of determination >0.99), recovery (95.22-118.81%), accuracy (90.52-116.96), and precision (<4.0%), and were successfully applied for the quantitative analysis of P. pubescens leaves.
| S-EPMC8747080 | biostudies-literature
Project description:Demands for increased analytical rigor have been growing within the botanical and dietary supplement industry due to concerns relative to safety, efficacy, and quality. Adulteration, ambiguous definitions, and insufficient perspective on safety are some of the major issues that arise when selecting a botanical extract. Herein, our comprehensive analytical approach is detailed for the selection of grape seed extracts. This approach provided characterization for the constituents above a threshold of toxicological concern by subjecting the extract to UHPLC-UV-CAD-HRMS and GC-FID & GC-HRMS. Thus, constituents within a wide range of volatility were evaluated. Furthermore, the extract was compared to authenticated botanical materials to confirm that no adulteration took place and was also compared to other grape seed extract sources to confirm that the material falls within the general profile. Finally, these data were cleared via an in silico safety assessment based on the list of constituents above the threshold of toxicological concern.
| S-EPMC6102626 | biostudies-literature
Project description:The performance of Watson & Ahumada's model of human visual motion sensing is compared against human psychophysical performance. The stimulus consists of random dots undergoing rotary motion, displayed in a circular annulus. The model matches psychophysical observer performance with respect to most parameters. It is able to replicate some key psychophysical findings such as invariance of observer performance to dot density in the display, and decrease of observer performance with frame duration of the display.Associated with the concept of rotary motion is the notion of a center about which rotation occurs. One might think that for accurate estimation of rotary motion in the display, this center must be accurately known. A simple vector analysis reveals that this need not be the case. Numerical simulations confirm this result, and may explain the position invariance of MST(d) cells. Position invariance is the experimental finding that rotary motion sensitive cells are insensitive to where in their receptive field rotation occurs.When all the dots in the display are randomly drawn from a uniform distribution, illusory rotary motion is perceived. This case was investigated by Rose & Blake previously, who termed the illusory rotary motion the omega effect. Two important experimental findings are reported concerning this effect. First, although the display of random dots evokes perception of rotary motion, the direction of motion perceived does not depend on what dot pattern is shown. Second, the time interval between spontaneous flips in perceived direction is lognormally distributed (mode approximately 2 s). These findings suggest the omega effect fits in the category of a typical bistable illusion, and therefore the processes that give rise to this illusion may be the same processes that underlie much of other bistable phenomenon.
| S-EPMC2640429 | biostudies-literature
Project description:In vivo dosimetry is important during radiotherapy to ensure the accuracy of the dose delivered to the treatment volume. A dosimeter should be characterized based on its application before it is used for in vivo dosimetry. In this study, we characterize a new MOSFET-based detector, the MOSkin detector, on surface for in vivo skin dosimetry. The advantages of the MOSkin detector are its water equivalent depth of measurement of 0.07 mm, small physical size with submicron dosimetric volume, and the ability to provide real-time readout. A MOSkin detector was calibrated and the reproducibility, linearity, and response over a large dose range to different threshold voltages were determined. Surface dose on solid water phantom was measured using MOSkin detector and compared with Markus ionization chamber and GAFCHROMIC EBT2 film measurements. Dependence in the response of the MOSkin detector on the surface of solid water phantom was also tested for different (i) source to surface distances (SSDs); (ii) field sizes; (iii) surface dose; (iv) radiation incident angles; and (v) wedges. The MOSkin detector showed excellent reproducibility and linearity for dose range of 50 cGy to 300 cGy. The MOSkin detector showed reliable response to different SSDs, field sizes, surface, radiation incident angles, and wedges. The MOSkin detector is suitable for in vivo skin dosimetry.
| S-EPMC5711095 | biostudies-literature
Project description:The killing of tumor cells by ionizing radiation beams in cancer radiotherapy is currently based on a rather empirical understanding of the basic mechanisms and effectiveness of DNA damage by radiation. By contrast, the mechanical behaviour of DNA encompassing sequence sensitivity and elastic transitions to plastic responses is much better understood. A novel approach is proposed here based on a micromechanical Silicon Nanotweezers device. This instrument allows the detailed biomechanical characterization of a DNA bundle exposed to an ionizing radiation beam delivered here by a therapeutic linear particle accelerator (LINAC). The micromechanical device endures the harsh environment of radiation beams and still retains molecular-level detection accuracy. In this study, the first real-time observation of DNA damage by ionizing radiation is demonstrated. The DNA bundle degradation is detected by the micromechanical device as a reduction of the bundle stiffness, and a theoretical model provides an interpretation of the results. These first real-time observations pave the way for both fundamental and clinical studies of DNA degradation mechanisms under ionizing radiation for improved tumor treatment.
| S-EPMC6444744 | biostudies-literature