Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

3D-printed assistive pipetting system for gel electrophoresis for technicians with low acuity vision.

ABSTRACT: In molecular biology laboratories, many tasks require fine motor control and high acuity vision. For example, lab technicians with visual impairment experience difficulty loading samples into the small wells of a horizontal agarose gel. We have developed a 3D-printable gel loading system which allows technicians with low-contrast vision to load gels correctly. It includes a casting tray, a bridge, and a modified comb. The system provides a high-contrast visual field to improve visibility, and the bridge allows pipette tips to be inserted at the correct location and only to the correct depth. The necessary computer files for printing this device are freely available to increase the accessibility of molecular biology laboratories to people with visual impairment.

SUBMITTER: Huynh AV

PROVIDER: S-EPMC7852844 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

3D-printed assistive pipetting system for gel electrophoresis for technicians with low acuity vision.

Huynh Alex Viqian AV Stein Phillip P Buhr Ethan D ED

BioTechniques 20201214 1

In molecular biology laboratories, many tasks require fine motor control and high acuity vision. For example, lab technicians with visual impairment experience difficulty loading samples into the small wells of a horizontal agarose gel. We have developed a 3D-printable gel loading system which allows technicians with low-contrast vision to load gels correctly. It includes a casting tray, a bridge, and a modified comb. The system provides a high-contrast visual field to improve visibility, and th ...[more]

PMID: 33307798

Similar Datasets

Reading Acuity as a Predictor of Low-Vision Reading Performance.

Project description:PurposeMost people with low vision experience difficulty with reading. Reading assessment can provide guidance for prescription of reading aids and strategies for reading rehabilitation. Here we investigate the effectiveness of letter acuity (LA) and reading acuity (RA) as predictors of low-vision reading performance.MethodsLow-vision subjects (n = 58), young control subjects (n = 52), and older control subjects (n = 14) participated in this study. The low-vision subjects were separated into a Macular group (n = 30) and a Nonmacular group (n = 28) based on whether the diagnoses primarily affected the macular area. LA was measured with the Lighthouse Distance Visual Acuity Chart and RA with the MNREAD Acuity Chart. Reading speeds were obtained across a range of print sizes from the MNREAD test. The MNREAD data were used to estimate required print sizes for three functionally important types of reading for each subject: spot reading (40 words/min [wpm]), fluent reading (80 wpm), and critical print size (required to achieve maximum reading speed).ResultsFor equal values of LA, the Macular group had significantly worse RA than the Nonmacular group. The differences between vision groups, as well as individual variations within groups, were largely explained by the differences in RA. RA is a better predictor than LA for spot reading size, fluent reading size, and critical print size.ConclusionsRA may provide more accurate assessment of reading performance than LA for purposes of low-vision reading rehabilitation.

| S-EPMC6181187 | biostudies-literature

3D Printed Microfluidic Devices for Microchip Electrophoresis of Preterm Birth Biomarkers.

Project description:This work demonstrates for the first time the creation of microchip electrophoresis devices with ?50 ?m cross-sectional dimensions by stereolithographic 3D printing and their application in the analysis of medically significant biomarkers related to risk for preterm birth (PTB). We determined that device current was linear with applied potential up to 800 V (620 V/cm). We optimized device and separation conditions using fluorescently labeled amino acids as a model system and compared the performance in our 3D printed microfluidic devices to that in other device materials commonly used for microchip electrophoresis analysis. We demonstrated for the first time microchip electrophoresis in a 3D printed device of three PTB biomarkers, including peptides and a protein, with suitable separation characteristics. Limits of detection for microchip electrophoresis in 3D printed microfluidic devices were also determined for PTB biomarkers to be in the high picomolar to low nanomolar range.

| S-EPMC6561337 | biostudies-literature

3D Printed Reconfigurable Modular Microfluidic System for Generating Gel Microspheres.

Project description:Integrated microfluidic systems afford extensive benefits for chemical and biological fields, yet traditional, monolithic methods of microfabrication restrict the design and assembly of truly complex systems. Here, a simple, reconfigurable and high fluid pressure modular microfluidic system is presented. The screw interconnects reversibly assemble each individual microfluidic module together. Screw connector provided leak-free fluidic communication, which could withstand fluid resistances up to 500 kPa between two interconnected microfluidic modules. A sample library of standardized components and connectors manufactured using 3D printing was developed. The capability for modular microfluidic system was demonstrated by generating sodium alginate gel microspheres. This 3D printed modular microfluidic system makes it possible to meet the needs of the end-user, and can be applied to bioassays, material synthesis, and other applications.

| S-EPMC7074726 | biostudies-literature

Machine Learning and Machine Vision Accelerate 3D Printed Orodispersible Film Development.

Project description:Orodispersible films (ODFs) are an attractive delivery system for a myriad of clinical applications and possess both large economical and clinical rewards. However, the manufacturing of ODFs does not adhere to contemporary paradigms of personalised, on-demand medicine, nor sustainable manufacturing. To address these shortcomings, both three-dimensional (3D) printing and machine learning (ML) were employed to provide on-demand manufacturing and quality control checks of ODFs. Direct ink writing (DIW) was able to fabricate complex ODF shapes, with thicknesses of less than 100 µm. ML algorithms were explored to classify the ODFs according to their active ingredient, by using their near-infrared (NIR) spectrums. A supervised model of linear discriminant analysis was found to provide 100% accuracy in classifying ODFs. A subsequent partial least square algorithm was applied to verify the dose, where a coefficient of determination of 0.96, 0.99 and 0.98 was obtained for ODFs of paracetamol, caffeine, and theophylline, respectively. Therefore, it was concluded that the combination of 3D printing, NIR and ML can result in a rapid production and verification of ODFs. Additionally, a machine vision tool was used to automate the in vitro testing. These collective digital technologies demonstrate the potential to automate the ODF workflow.

| S-EPMC8706962 | biostudies-literature

Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles.

Project description:Hydrogels are attractive materials for tissue engineering, but efforts to date have shown limited ability to produce the microstructural features necessary to promote cellular self-organization into hierarchical three-dimensional (3D) organ models. Here we develop a hydrogel ink containing prefabricated gelatin fibres to print 3D organ-level scaffolds that recapitulate the intra- and intercellular organization of the heart. The addition of prefabricated gelatin fibres to hydrogels enables the tailoring of the ink rheology, allowing for a controlled sol-gel transition to achieve precise printing of free-standing 3D structures without additional supporting materials. Shear-induced alignment of fibres during ink extrusion provides microscale geometric cues that promote the self-organization of cultured human cardiomyocytes into anisotropic muscular tissues in vitro. The resulting 3D-printed ventricle in vitro model exhibited biomimetic anisotropic electrophysiological and contractile properties.

| S-EPMC10686196 | biostudies-literature

Cell-laden alginate dialdehyde-gelatin hydrogels formed in 3D printed sacrificial gel.

Project description:Alginate dialdehyde-gelatin (ADA-GEL) hydrogels have been reported to be suitable matrices for cell encapsulation. In general, application of ADA-GEL as bioink has been limited to planar structures due to its low viscosity. In this work, ring shaped constructs of ADA-GEL hydrogel were fabricated by casting the hydrogel into sacrificial molds which were 3D printed from 9% methylcellulose and 5% gelatin. Dissolution of the supporting structure was observed during the 1st week of sample incubation. In addition, the effect of different crosslinkers (Ba2+ and Ca2+) on the physicochemical properties of ADA-GEL and on the behavior of encapsulated MG-63 cells was investigated. It was found that Ba2+ crosslinked network had more than twice higher storage modulus, and mass decrease to 70% during incubation compared to 42% in case of hydrogels crosslinked with Ca2+. In addition, faster increase in cell viability during incubation and earlier cell network formation were observed after Ba2+ crosslinking. No negative effects on cell activity due to the use of sacrificial materials were observed. The approach presented here could be further developed for cell-laden ADA-GEL bioink printing into complex 3D structures.

| S-EPMC7062650 | biostudies-literature

Band-collision gel electrophoresis.

Project description:Electrophoretic mobility shift assays are widely used in gel electrophoresis to study binding interactions between different molecular species loaded into the same well. However, shift assays can access only a subset of reaction possibilities that could be otherwise seen if separate bands of reagent species might instead be collisionally reacted. Here, we adapt gel electrophoresis by fabricating two or more wells in the same lane, loading these wells with different reagent species, and applying an electric field, thereby producing collisional reactions between propagating pulse-like bands of these species, which we image optically. For certain pairs of anionic and cationic dyes, propagating bands pass through each other unperturbed; yet, for other pairs, we observe complexing and precipitation reactions, indicating strong attractive interactions. We generalize this band-collision gel electrophoresis (BCGE) approach to other reaction types, including acid-base, ligand exchange, and redox, as well as to colloidal species in passivated large-pore gels.

| S-EPMC6690962 | biostudies-literature

Dodecyl sulphate/polyacrylamide-gel electrophoresis at low pH values and low temperatures.

Project description:A simple method is described for dodecyl sulphate/polyacrylamide-gel electrophoresis of pH- and temperature-labile biological intermediates. The method is based on a catalyst system that works at temperatures of 2--4 degrees C and pH values of 2--4 and an appropriate buffer system containing Li+ or Tris [CH2OH--C(CH2OH)2--NH3+] instead of Na+. This system does not lead to the precipitation of 1% dodecyl sulphate.

| S-EPMC1161216 | biostudies-other

SurgGrip: a compliant 3D printed gripper for vision-based grasping of surgical thin instruments.

Project description:This paper presents a conceptual design and implementation of a soft, compliant 3D printed gripper (SurgGrip), conceived for automated grasping of various surgery-based thin-flat instruments. The proposed solution includes (1) a gripper with a resilient mechanism to increase safety and better adaptation to the unstructured environment; (2) flat fingertips with mortise and tenon joint to facilitate pinching and enveloping based grasping of thin and random shape tools; (3) a soft pad on the fingertips to enable the high surface area to maintain stable grasping of the surgical instruments; (4) a four-bar linkage with a leadscrew mechanism to provide a precise finger movement; (5) enable automated manipulation of surgical tools using computer vision. Our gripper model is designed and fabricated by integrating soft and rigid components through a hybrid approach. The SurgGrip shows passive adaptation through inherent compliance of linear and torsional spring. The four-bar linkage mechanism controlled by a motor-leadscrew-nut drive provides precise gripper opening and closing movements. The experimental results show that the SurgGrip can detect, segment through a camera, and grasp surgical instruments (maximum 606.73 gs), with a 67% success rate (grasped 10 out of 12 selected tools) at 3.21 mm/s grasping speed and 15.81 s object grasping time autonomously. Besides, we demonstrated the pick and place abilities of SurgGrip on flat and nonflat surfaces in real-time.Supplementary informationThe online version contains supplementary material available at 10.1007/s11012-022-01594-6.

| S-EPMC9618027 | biostudies-literature

Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework.

Project description:The feasibility of the three-dimensional (3D) cartilage regeneration technology based on the "steel (framework)-reinforced concrete (engineered cartilage gel, ECG)" concept has been verified in large animals using a decalcified bone matrix (DBM) as the framework. However, the instability of the source, large sample variation, and lack of control over the 3D shape of DBM have greatly hindered clinical translation of this technology. To optimize cartilage regeneration using the ECG-framework model, the current study explores the feasibility of replacing the DBM framework with a 3D-printed polycaprolactone (PCL) framework. The PCL framework showed good biocompatibility with ECG and achieved a high ECG loading efficiency, similar to that of the DBM framework. Furthermore, PCL-ECG constructs caused a milder inflammatory response in vivo than that induced by DBM-ECG constructs, which was further supported by an in vitro macrophage activation experiment. Notably, the PCL-ECG constructs successfully regenerated mature cartilage and essentially maintained their original shape throughout 8 weeks of subcutaneous implantation. Quantitative analysis revealed that the GAG and total collagen contents of the regenerated cartilage in the PCL-ECG group were significantly higher than those in the DBM-ECG group. The results indicated that the 3D-printed PCL framework-a clinically approved biomaterial with multiple advantages including customizable shape design, mechanical strength control, and standardized production-can serve as an excellent framework for supporting the 3D cartilage regeneration of ECG. This provides a feasible novel strategy for the clinical translation of ECG-based 3D cartilage regeneration.

| S-EPMC9171075 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data