Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Correction: Wang, F., et al. Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots. Materials 2020, 13, 2720.

ABSTRACT: In the original article [...].

SUBMITTER: Wang F

PROVIDER: S-EPMC7865266 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Correction: Wang, F., et al. Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots. Materials 2020, 13, 2720.

Wang Fuyue F Wang Xiangjie X Cui Jianzhong J

Materials (Basel, Switzerland) 20210126 3

In the original article [...]. ...[more]

PMID: 33530654

Similar Datasets

Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots.

Project description:The effect of low-frequency electromagnetic fields on the micro-structure and macro-segregation of 5A90 alloy ingots during the semi-continuous casting process were quantitatively investigated. The ingots of a 5A90 alloy with a diameter 170 mm were produced by the conventional direct chill casting (DCC) process and low-frequency electromagnetic casting (LFEC) with 10 Hz/100 A. The results showed that LFEC can substantially refine the micro-structure and shorten the width of the columnar grain area of an ingot. The refinement effect came with the relieving of grain boundary segregation and an improvement in the macro-segregation of the ingot. Compared with the traditional DCC process, the tensile properties of the aged alloy prepared by the LFEC process were improved due to the effects of the increase in solid solubility and the strengthening of the grain refinement, so that the stability of the tensile properties was also improved. Meanwhile, the rate of yield increased by 2.3% with a decrease in the peeling thickness of the ingot.

| S-EPMC7345327 | biostudies-literature

Discussion of Kallus (2020) and Mo et al (2020).

Project description:We discuss the results on improving the generalizability of individualized treatment rule following the work in Kallus [1] and Mo et al. [5]. We note that the advocated weights in Kallus [1] are connected to the efficient score of the contrast function. We further propose a likelihood-ratio-based method (LR-ITR) to accommodate covariate shifts, and compare it to the CTE-DR-ITR method proposed in Mo et al. [5]. We provide the upper-bound on the risk function of the target population when both the covariate shift and the contrast function shift are present. Numerical studies show that LR-ITR can outperform CTE-DR-ITR when there is only covariate shift.

| S-EPMC8409173 | biostudies-literature

Harbort&Hashimoto et al. 2020

Project description:Root-secreted coumarins and the microbiota interact to improve iron nutrition in Arabidopsis. Harbort and Hashimoto et al. Cell Host & Microbe 2020

| PRJEB38663 | ENA

Modelling the Mechanical Attributes (Roughness, Strength, and Hardness) of Al-alloy A356 during Sand Casting.

Project description:Sand-casting is a well established primary process for manufacturing various parts of A356 alloy. However, the quality of the casting is adversely affected by the change in the magnitude of the control variables. For instance, a larger magnitude of pouring velocity induces a drop effect and a lower velocity increases the likelihood of cold-shut and mis-run types of defects. Similarly, a high pouring temperature causes the formation of hot tears, whereas a low temperature is a source of premature solidification. Likewise, a higher moisture content yields microcracks (due to gas shrinkages) in the casting and a lower moisture content results in the poor strength of the mold. Therefore, the appropriate selection of control variables is essential to ensure quality manufactured products. The empirical relations could provide valuable guidance in this regard. Additionally, although the casting process was optimized for A356 alloy, it was mostly done for a single response. Therefore, this paper aimed to formulate empirical relations for the contradictory responses, i.e., hardness, ultimate tensile strength and surface roughness, using the response surface methodology. The experimental results were comprehensively analyzed using statistical and scanning electron microscopic analyses. Optimized parameters were proposed and validated to achieve castings with high hardness (84.5 HB) and strength (153.5 MPa) with minimum roughness (5.8 µm).

| S-EPMC7040807 | biostudies-literature

Breaking through the strength-ductility trade-off dilemma in an Al-Si-based casting alloy.

Project description:Al-Si-based casting alloys have a great potential in various industrial applications. Common strengthening strategies on these alloys are accompanied inevitably by sacrifice of ductility, known as strength-ductility trade-off dilemma. Here, we report a simple route by combining rapid solidification (RS) with a post-solidification heat treatment (PHT), i.e. a RS?+?PHT route, to break through this dilemma using a commercial Al-Si-based casting alloy (A356 alloy) as an example. It is shown that yield strength and elongation to failure of the RS?+?PHT processed alloy are elevated simultaneously by increasing the cooling rate upon RS, which are not influenced by subsequent T6 heat treatment. Breaking through the dilemma is attributed to the hierarchical microstructure formed by the RS?+?PHT route, i.e. highly dispersed nanoscale Si particles in Al dendrites and nanoscale Al particles decorated in eutectic Si. Simplicity of the RS?+?PHT route makes it being suitable for industrial scaling production. The strategy of engineering microstructures offers a general pathway in tailoring mechanical properties of other Al-Si-based alloys. Moreover, the remarkably enhanced ductility of A356 alloy not only permits strengthening further the material by work hardening but also enables possibly conventional solid-state forming of the material, thus extending the applications of such an alloy.

| S-EPMC4977527 | biostudies-literature

Pragmatics for infants: commentary on Wenzel et al. (2020).

Project description: Not available

| S-EPMC8170227 | biostudies-literature

Reply to Soman et al, Alffenaar et al, Metcalfe et al, and Raoult.

Project description: Not available

| S-EPMC4696596 | biostudies-literature

Correction for Wang et al., TLR4/MD-2 activation by a synthetic agonist with no similarity to LPS.

Project description: Not available

| S-EPMC8214700 | biostudies-literature

Cryobiopsy Compared with Surgical Lung Biopsy in ILD: Reply to Maldonado et al., Froidure et al., Bendstrup et al., Agarwal et al., Richeldi et al., Rajchgot et al., and Quadrelli et al.

Project description: Not available