High External Photoluminescence Quantum Yield in Tin Halide Perovskite Thin Films.
Ontology highlight
ABSTRACT:
SUBMITTER: Poli I
PROVIDER: S-EPMC7887870 | biostudies-literature | 2021 Feb
REPOSITORIES: biostudies-literature
Publications
High External Photoluminescence Quantum Yield in Tin Halide Perovskite Thin Films.
Poli Isabella I Kim Guan-Woo GW Wong E Laine EL Treglia Antonella A Folpini Giulia G Petrozza Annamaria A
ACS energy letters 20210121 2
We show that pristine thin films made of tin halide perovskite have external photoluminescence quantum yield comparable to that of lead halide perovskite, i.e., the material in use to prepare state-of-the-art perovskite solar cells. ...[more]
Similar Datasets
Project description:In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb1-xSnxI3, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl2 source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 Å3 for MAPbI3 to about 983.3 Å3 for MAPb0.39Sn0.61I3, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (Eg) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3-1 µm) and surface coverage of the perovskite films compared with the precursor films.
| S-EPMC8269519 | biostudies-literature
Project description:The application of luminescent materials in display screens and devices requires micropatterned structures. In this work, we have successfully printed microstructures of a two-dimensional (2D), orange-colored organic/inorganic hybrid perovskite ((C6H5CH2NH3)2PbI4) using two different soft lithography techniques. Notably, both techniques yield microstructures with very high aspect ratios in the range of 1.5-1.8. X-ray diffraction reveals a strong preferential orientation of the crystallites along the c-axis in both patterned structures, when compared to nonpatterned, drop-casted thin films. Furthermore, (time-resolved) photoluminescence (PL) measurements reveal that the optical properties of (C6H5CH2NH3)2PbI4 are conserved upon patterning. We find that the larger grain sizes of the patterned films with respect to the nonpatterned film give rise to an enhanced PL lifetime. Thus, our results demonstrate easy and cost-effective ways to manufacture patterns of 2D organic/inorganic hybrid perovskites, while even improving their optical properties. This demonstrates the potential use of color-tunable 2D hybrids in optoelectronic devices.
| S-EPMC5909174 | biostudies-literature
Project description:The prevalence of background hole doping in tin halide perovskites usually dominates their recombination dynamics. The addition of excess Sn halide source to the precursor solution is the most frequently used approach to reduce the hole doping and reveals photo-carrier dynamics related to defects activity. This study presents an experimental and theoretical investigation on defects under light irradiation in tin halide perovskites by combining measurements of photoluminescence with first principles computational modeling. It finds that tin perovskite thin films prepared with an excess of Sn halide sources exhibit an enhancement of the photoluminescence intensity over time under continuous excitation in inert atmosphere. The authors propose a model in which light irradiation promotes the annihilation of VSn 2- /Sni 2+ Frenkel pairs, reducing the deep carrier trapping centers associated with such defect and increasing the radiative recombination. Importantly, these observations can be traced in the open-circuit voltage dynamics of tin-based halide perovskite solar cells, implying the relevance of controlling the Sn photochemistry to stabilize tin perovskite devices.
| S-EPMC9661860 | biostudies-literature
Project description:Slow hot-carrier cooling may potentially allow overcoming the maximum achievable power conversion efficiency of single-junction solar cells. For formamidinium tin triiodide, an exceptional slow cooling time of a few nanoseconds was reported. However, a systematic study of the cation influence, as is present for lead compounds, is lacking. Here, we report the first comparative study on formamidinium, methylammonium, and cesium tin triiodide thin films. By investigating their photoluminescence, we observe a considerable shift of the emission peak to high energy with the increase of the excited-state population, which is more prominent in the case of the two hybrid organic-inorganic perovskites (∼45 meV vs ∼15 meV at 9 × 1017 cm-3 carrier density). The hot-carrier photoluminescence of the three tin compositions decays with a 0.6-2.8 ns time constant with slower cooling observed for the two hybrids, further indicating their importance.
| S-EPMC10928715 | biostudies-literature
Project description:In recent years, there have been tremendous advancements in the growth of monolayer transition metal dichalcogenides (TMDCs) by chemical vapor deposition (CVD). However, obtaining high photoluminescence quantum yield (PL QY), which is the key figure of merit for optoelectronics, is still challenging in the grown monolayers. Specifically, the as-grown monolayers often exhibit lower PL QY than their mechanically exfoliated counterparts. In this work, we demonstrate synthetic tungsten diselenide (WSe2) monolayers with PL QY exceeding that of exfoliated crystals by over an order of magnitude. PL QY of ~60% is obtained in monolayer films grown by CVD, which is the highest reported value to date for WSe2 prepared by any technique. The high optoelectronic quality is enabled by the combination of optimizing growth conditions via tuning the halide promoter ratio, and introducing a simple substrate decoupling method via solvent evaporation, which also mechanically relaxes the grown films. The achievement of scalable WSe2 with high PL QY could potentially enable the emergence of technologically relevant devices at the atomically thin limit.
| S-EPMC6314873 | biostudies-literature
Project description:We determine the influence of substitutional defects on perovskite quantum dots through experimental and theoretical investigations. Substitutional defects were introduced by trivalent dopants (In, Sb, and Bi) in CsPbBr3 by ligand-assisted reprecipitation. We show that the photoluminescence (PL) emission peak shifts toward shorter wavelengths when doping concentrations are increased. Trivalent metal-doped CsPbBr3 enhanced the PL quantum yield (~10%) and air stability (over 10 days). Our findings provide new insights into the influence of substitutional defects on substituted CsPbBr3 that underpin their physical properties.
| S-EPMC7221998 | biostudies-literature
Project description:Recently, lead halide perovskites with outstanding emission performance have become new candidate materials for light-emitting devices and displays; however, the toxicity of lead and instability of halide perovskites remain significant challenges. Herein, we report the aqueous acid-based synthesis of highly emissive two-dimensional (2D) tin halide perovskites, (octylammonium)2SnX4 (X = Br, I, or mixtures thereof), which displayed a high absolute photoluminescence (PL) quantum yield of near-unity in the solid-state, PL emission centered at 600 nm with a broad bandwidth (136 nm), a large Stokes shift (250 nm), long-lived luminescence (τ = 3.3 μs), and zero overlap between their absorption and emission spectra. Significantly, the stability study of 2D tin halide perovskites monitored by the PL quantum yield showed no changes after 240 days of storage at room temperature under ambient air and humidity conditions. The PL emission of the 2D tin halide perovskites was tuned from yellow to deep red by controlling halide composition. Furthermore, new yellow phosphors with superior optical properties are used to fabricate UV pumped white light emitting diodes (WLEDs). We expect these results to facilitate the development of new environmentally friendly and high-performance phosphors for future lighting and display technologies.
| S-EPMC6492635 | biostudies-literature
Project description:Lead halide perovskite nanocrystals of the formula CsPbBr3 have recently been identified as potential time taggers in scintillating heterostructures for time-of-flight positron emission tomography (TOF-PET) imaging thanks to their ultrafast decay kinetics. This study investigates the potential of this material experimentally. We fabricated CsPbBr3 thin films on scintillating GGAG:Ce (Gd2.985Ce0.015Ga2.7Al2.3O12) wafer as a model structure for the future sampling detector geometry. We focused this study on the radioluminescence (RL) response of this composite material. We compare the results of two spin-coating methods, namely the static and the dynamic process, for the thin film preparation. We demonstrated enhanced RL intensity of both CsPbBr3 and GGAG:Ce scintillating constituents of a composite material. This synergic effect arises in both the RL spectra and decays, including decays in the short time window (50 ns). Consequently, this study confirms the applicability of CsPbBr3 nanocrystals as efficient time taggers for ultrafast timing applications, such as TOF-PET.
| S-EPMC8746850 | biostudies-literature
Project description:Charge transport in three-dimensional metal-halide perovskite semiconductors is due to a complex combination of ionic and electronic contributions, and its study is particularly relevant in light of their successful applications in photovoltaics as well as other opto- and microelectronic applications. Interestingly, the observation of field effect at room temperature in transistors based on solution-processed, polycrystalline, three-dimensional perovskite thin films has been elusive. In this work, we study the time-dependent electrical characteristics of field-effect transistors based on the model methylammonium lead iodide semiconductor and observe the drastic variations in output current, and therefore of apparent charge carrier mobility, as a function of the applied gate pulse duration. We infer this behavior to the accumulation of ions at the grain boundaries, which hamper the transport of carriers across the FET channel. This study reveals the dynamic nature of the field effect in solution-processed metal-halide perovskites and offers an investigation methodology useful to characterize charge carrier transport in such emerging semiconductors.
| S-EPMC8552216 | biostudies-literature
Project description:We apply the contactless quasi-steady-state photoconductance (QSSPC) method to co-evaporated methyl ammonium lead iodide (MAPbI3) perovskite thin-films. Using an adapted calibration for ultralow photoconductances, we extract the injection-dependent carrier lifetime of the MAPbI3 layer. The lifetime is found to be limited by radiative recombination at the high injection densities applied during the QSSPC measurement, enabling the extraction of the electron and hole mobility sum in the MAPbI3 using the known coefficient of radiative recombination of MAPbI3. Combining the QSSPC measurement with transient photoluminescence measurements, performed at much lower injection densities, we obtain the injection-dependent lifetime curve over several orders of magnitude. From the resulting lifetime curve, we determine the achievable open-circuit voltage of the examined MAPbI3 layer.
| S-EPMC10333188 | biostudies-literature