Dataset Information

Synthesis and Characterization of Fe-TiO₂ Nanomaterial: Performance Evaluation for RB5 Decolorization and In Vitro Antibacterial Studies.

ABSTRACT: A photocatalytic system for decolorization of double azo reactive black 5 (RB5) dye and water disinfection of E. coli was developed. Sol gel method was employed for the synthesis of Fe-TiO₂ photocatalysts and were characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS) and Brunauer-Emmett-Teller (BET) analysis. Results showed that photocatalytic efficiency was greatly influenced by 0.1 weight percent iron loading and 300 °C calcination temperature. The optimized reaction parameters were found to be the ambient temperature, working solution pH 6.2 and 1 mg g^-1 dose to completely decolorize RB5. The isotherm studies showed that RB5 adsorption by Fe-TiO₂ followed the Langmuir isotherm with maximum adsorption capacity of 42.7 mg g^-1 and K_ads 0.0079 L mg^-1. Under illumination, the modified photocatalytic material had higher decolorization efficiency as compared to unmodified photocatalyst. Kinetic studies of the modified material under visible light irradiation indicated the reaction followed the pseudo-first-order kinetics. The illumination reaction followed the Langmuir-Hinshelwood (L-H) model as the rate of dye decolorization increased with an incremental increase in dye concentration. The L-H constant K_c was 1.5542 mg L^-1?h^-1 while K_ads was found 0.1317 L mg^-1. The best photocatalyst showed prominent percent reduction of E. coli in 120 min. Finally, 0.1Fe-TiO₂-300 could be an efficient photocatalyst and can provide a composite solution for RB5 decolorization and bacterial strain inhibition.

SUBMITTER: Khan MS

PROVIDER: S-EPMC7915575 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Synthesis and Characterization of Fe-TiO2 Nanomaterial: Performance Evaluation for RB5 Decolorization and In Vitro Antibacterial Studies.

Khan Muhammad Saqib MS Shah Jehanzeb Ali JA Riaz Nadia N Butt Tayyab Ashfaq TA Butt Tayyab Ashfaq TA Khan Asim Jahangir AJ Khalifa Walid W Gasmi Hatem Hassin HH Latifee Enamur Rahim ER Arshad Muhammad M Al-Naghi Ahmed Abdullah Alawi AAA Ul-Hamid Anwar A Arshad Muhammad M Bilal Muhammad M

Nanomaterials (Basel, Switzerland) 20210209 2

A photocatalytic system for decolorization of double azo reactive black 5 (RB5) dye and water disinfection of E. coli was developed. Sol gel method was employed for the synthesis of Fe-TiO2 photocatalysts and were characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), diffuse refle ...[more]

PMID: 33572142

Similar Datasets

Project description:Textile dyes and microbial contamination of surface water bodies have been recognized as emerging quality concerns around the globe. The simultaneous resolve of such impurities can pave the route for an amicable technological solution. This study reports the photocatalytic performance and the biocidal potential of nitrogen-doped TiO2 against reactive black 5 (RB5), a double azo dye and E. coli. Molecular docking was performed to identify and quantify the interactions of the TiO2 with ?-lactamase enzyme and to predict the biocidal mechanism. The sol-gel technique was employed for the synthesis of different mol% nitrogen-doped TiO2. The synthesized photocatalysts were characterized using thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). The effects of different synthesis and reaction parameters were studied. RB5 dye degradation was monitored by tracking shifts in the absorption spectrum and percent chemical oxygen demand (COD) removal. The best nanomaterial depicted 5.57 nm crystallite size, 49.54 m2 g-1 specific surface area, 11-40 nm particle size with spherical morphologies, and uniform distribution. The RB5 decolorization data fits well with the pseudo-first-order kinetic model, and the maximum monolayer coverage capacity for the Langmuir adsorption model was found to be 40 mg g-1 with Kads of 0.113 mg-1. The LH model yielded a higher coefficient KC (1.15 mg L-1 h-1) compared to the adsorption constant KLH (0.3084 L mg-1). 90% COD removal was achieved in 60 min of irradiation, confirmed by the disappearance of spectral peaks. The best-optimized photocatalysts showed a noticeable biocidal potential against human pathogenic strain E. coli in 150 min. The biocidal mechanism of best-optimized photocatalyst was predicted by molecular docking simulation against E. coli ?-lactamase enzyme. The docking score (-7.6 kcal mol-1) and the binding interaction with the active site residues (Lys315, Thr316, and Glu272) of ?-lactamase further confirmed that inhibition of ?-lactamase could be a most probable mechanism of biocidal activity.

Project description:Considering the significance of biological and eco-friendly nanomaterials, in the present study, we have synthesized silver nanoparticles from the exopolysaccharide of recently recovered bacterial strain CEES51 from the Red Sea coastal area of Jeddah, Saudi Arabia. 16S ribosomal RNA gene sequencing was used to characterize the isolated bacteria, and it was identified as Mesoflavibacter zeaxanthinifaciens and assigned an accession number MH707257.1 GenBank. The bacterial strain is an excellent exopolysaccharide producer and survived at hypersaline (30%) and high-temperature (50°C) conditions. The bacterial exopolysaccharides were employed for the fabrication of silver nanoparticles at room temperature. UV-visible spectrophotometer optimized the synthesized nanoparticles, and their size was determined by Nanophox particle size analyzer and dynamic light scattering. Additionally, the X-ray powder diffraction and Fourier-transform infrared spectroscopy studies also approved its crystalline nature and the involvement of organic functional groups in their formation. The synthesized nanomaterials were tested for their antibacterial and antibiofilm properties against pathogenic microorganisms Bacillus subtilis and methicillin-resistant Staphylococcus aureus. The antimicrobial property showed time, and dose-dependent response with a maximum of zone inhibition was observed at around 22 and 18 mm at a dose of 50 µg/well against B. subtilis and S. aureus and a minimum inhibitory concentration of 8 and 10 µg/ml, respectively. Furthermore, the synthesized silver nanoparticles possessed a substantial antibiofilm property and were also found to be biocompatible as depicted by red blood cell lysis assay and their interaction with peripheral blood mononuclear cells and human embryonic kidney 293 cells. Therefore, Mesoflavibacter zeaxanthinifaciens is found to be an excellent source for exopolysaccharide synthesis that assists in the silver nanoparticle production.

Dataset Information

Synthesis and Characterization of Fe-TiO₂ Nanomaterial: Performance Evaluation for RB5 Decolorization and In Vitro Antibacterial Studies.

Publications

Synthesis and Characterization of Fe-TiO<sub>2</sub> Nanomaterial: Performance Evaluation for RB5 Decolorization and In Vitro Antibacterial Studies.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets