Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Modeling of H₂ Permeation through Electroless Pore-Plated Composite Pd Membranes Using Computational Fluid Dynamics.

ABSTRACT: This work focused on the computational fluid dynamics (CFD) modeling of H₂/N₂ separation in a membrane permeator module containing a supported dense Pd-based membrane that was prepared using electroless pore-plating (ELP-PP). An easy-to-implement model was developed based on a source-sink pair formulation of the species transport and continuity equations. The model also included the Darcy-Forcheimer formulation for modeling the porous stainless steel (PSS) membrane support and Sieverts' law for computing the H₂ permeation flow through the dense palladium film. Two different reactor configurations were studied, which involved varying the hydrogen flow permeation direction (in-out or out-in). A wide range of experimental data was simulated by considering the impact of the operating conditions on the H₂ separation, such as the feed pressure and the H₂ concentration in the inlet stream. Simulations of the membrane permeator device showed an excellent agreement between the predicted and experimental data (measured as permeate and retentate flows and H₂ separation). Molar fraction profiles inside the permeator device for both configurations showed that concentration polarization near the membrane surface was not a limit for the hydrogen permeation but could be useful information for membrane reactor design, as it showed the optimal length of the reactor.

SUBMITTER: Fernandez A

PROVIDER: S-EPMC7915706 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effective H2 Separation through Electroless Pore-Plated Pd Membranes Containing Graphite Lead Barriers.

Project description:Hydrogen promotion as a clean energy vector could provide an efficient strategy for realizing real decarbonization of the current energy system. Purification steps are usually required in most H2-production processes, providing the use of Pd-based membranes, particularly those supported on porous stainless steel (PSS), important advantages against other alternatives. In this work, new composite membranes were prepared by modifying PSS supports with graphite, as an intermediate layer, before incorporating a palladium film by electroless pore-plating. Fully dense Pd layers were reached, with an estimated thickness of around 17 μm. Permeation measurements were carried out in two different modes: H2 permeation from the inner to the outer side of the membrane (in-out) and in the opposite way (out-in). H2 permeances between 3.24 × 10-4 and 4.33 × 10-4 mol m-2 s-1 Pa-0.5 with αH2/N2 ≥ 10,000 were reached at 350-450 °C when permeating from the outer to the inner surface. Despite a general linear trend between permeating H2 fluxes and pressures, the predicted intercept in (0,0) by the Sieverts' law was missed due to the partial Pd infiltration inside the pores. H2-permeances progressively decreased up to around 33% for binary H2-N2 mixtures containing 40 vol% N2 due to concentration-polarization phenomena. Finally, the good performance of these membranes was maintained after reversing the direction of the permeate flux. This fact practically demonstrates an adequate mechanical resistance despite generating tensile stress on the Pd layer during operation, which is not accomplished in other Pd membranes.

| S-EPMC7764324 | biostudies-literature

Simulation of H2/CH4 mixture permeation through MOF membranes using non-equilibrium molecular dynamics.

Project description:Grand canonical Monte Carlo (GCMC) simulations are widely used with equilibrium molecular dynamics (EMD) to predict gas adsorption and diffusion in single-crystals of metal-organic frameworks (MOFs). Adsorption and diffusion data obtained from these simulations are then combined to predict gas permeabilities and selectivities of MOF membranes. This GCMC + EMD approach is highly useful to screen a large number of MOFs for a target membrane-based gas separation process. External field non-equilibrium molecular dynamics (NEMD) simulations, on the other hand, can directly compute gas permeation by providing an accurate representation of MOF membranes but they are computationally demanding and require long simulation times. In this work, we performed NEMD simulations to investigate H2/CH4 separation performances of MOF membranes. Both single-component and binary mixture permeabilities of H2 and CH4 were computed using the NEMD approach and results were compared with the predictions of the GCMC + EMD approach and experimental measurements reported in the literature. Our results showed that there is a good agreement between NEMD simulations and experiments for the permeability and selectivity of MOF membranes. NEMD simulations provided the direct observation of the mass transfer resistances on the pore mouth of MOF membranes, which is neglected in the GCMC + EMD approach. Our results suggested that once the very large numbers of MOF materials were screened using the GCMC + EMD approach, more detailed NEMD calculations can be performed for the best membrane candidates to unlock the actual gas transport mechanism before the experimental fabrication of MOF membranes.

| S-EPMC6395021 | biostudies-literature

Computational Analyses of the AtTPC1 (Arabidopsis Two-Pore Channel 1) Permeation Pathway.

Project description:Two Pore Channels (TPCs) are cation-selective voltage- and ligand-gated ion channels in membranes of intracellular organelles of eukaryotic cells. In plants, the TPC1 subtype forms the slowly activating vacuolar (SV) channel, the most dominant ion channel in the vacuolar membrane. Controversial reports about the permeability properties of plant SV channels fueled speculations about the physiological roles of this channel type. TPC1 is thought to have high Ca2+ permeability, a conclusion derived from relative permeability analyses using the Goldman-Hodgkin-Katz (GHK) equation. Here, we investigated in computational analyses the properties of the permeation pathway of TPC1 from Arabidopsis thaliana. Using the crystal structure of AtTPC1, protein modeling, molecular dynamics (MD) simulations, and free energy calculations, we identified a free energy minimum for Ca2+, but not for K+, at the luminal side next to the selectivity filter. Residues D269 and E637 coordinate in particular Ca2+ as demonstrated in in silico mutagenesis experiments. Such a Ca2+-specific coordination site in the pore explains contradicting data for the relative Ca2+/K+ permeability and strongly suggests that the Ca2+ permeability of SV channels is largely overestimated from relative permeability analyses. This conclusion was further supported by in silico electrophysiological studies showing a remarkable permeation of K+ but not Ca2+ through the open channel.

| S-EPMC8508871 | biostudies-literature

Gas Permeation Characteristics of TiO2-ZrO2-Aromatic Organic Chelating Ligand (aOCL) Composite Membranes.

Project description:Methyl gallate (MG) and ethyl ferulate (EF) with a benzene ring were separately used as aromatic organic chelating ligands (aOCLs) to prepare two versions of TiO2-ZrO2-aOCL composite sols via hydrolysis and polycondensation reactions with titanium(IV) isopropoxide (Ti(OC3H7)4) and zirconium(IV) butoxide (Zr(OC4H9)4). Thermogravimetric and FT-IR analysis of dry gels revealed that aromatic rings were present in the residual organic matter when the gel was fired under nitrogen at 300 °C. In X-ray diffraction (XRD) measurements, the TiO2-ZrO2 composite material prepared using these two aOCLs showed an amorphous structure with no crystalline peaks for TiO2 and ZrO2. In N2 adsorption/desorption measurements at 77 K, the TiO2-ZrO2 samples using the aOCLs as a template appeared porous with a larger specific surface area than TiO2-ZrO2 without aOCL. TiO2-ZrO2-aOCL composite membranes were prepared by coating and firing TiO2-ZrO2-aOCL sol onto a SiO2 intermediate layer using an α-alumina porous tube as a substrate. Compared with the TiO2-ZrO2 membrane, the TiO2-ZrO2-aOCL membranes had higher gas permselectivity. The TiO2-ZrO2-EF membrane showed a He permeance of 2.69 × 10-6 mol m-2 s-1 Pa-1 with permeance ratios of He/N2 = 10.6 and He/CF4 = 163, while the TiO2-ZrO2-MG membrane revealed a bit less He permeance at 8.56 × 10-7 mol m-2 s-1 Pa-1 with greater permeance ratios of He/N2 = 61.7 and He/CF4 = 209 at 200 °C. A microporous TiO2-ZrO2 amorphous structure was obtained by introducing aOCL. The differences in the side chains of each aOCL could possibly account for the differences in the microporous structures of the resultant TiO2-ZrO2-aOCL membranes.

| S-EPMC7760951 | biostudies-literature

Effect of air bubbling on electroless Pd plating for the practical application of hydrogen selective membranes.

Project description:In this study, an air bubbling electroless plating (ELP) method was newly developed for the production of Pd composite membranes. The air bubble ELP alleviated the concentration polarization of Pd ions, making it possible to achieve a plating yield of 99.9% in 1 h and form very fine Pd grains with a uniform layer of ∼4.7 μm. A membrane with a diameter of 25.4 mm and a length of 450 mm was produced by the air bubbling ELP, achieving a hydrogen permeation flux of 4.0 × 10-1 mol m-2 s-1 and selectivity of ∼10 000 at 723 K with a pressure difference of 100 kPa. To confirm the reproducibility, six membranes were produced by the same method and assembled in a membrane reactor module to produce high-purity hydrogen by ammonia decomposition. Hydrogen permeation flux and selectivity of the six membranes at 723 K with a pressure difference of 100 kPa were 3.6 × 10-1 mol m-2 s-1 and ∼8900, respectively. An ammonia decomposition test with an ammonia feed rate of 12 000 mL min-1 showed that the membrane reactor produced hydrogen with >99.999% purity and a production rate of 1.01 Nm3 h-1 at 748 K with a retentate stream gauge pressure of 150 kPa and a permeation stream vacuum of -10 kPa. The ammonia decomposition tests confirmed that the newly developed air bubbling ELP method affords several advantages, such as rapid production, high ELP efficiency, reproducibility, and practical applicability.

| S-EPMC10170241 | biostudies-literature

Development of new pervaporation composite membranes for desalination: Membrane characterizations and experimental permeation data.

Project description:The data contained in this publication refers to a new approach to design composite pervaporation membranes that could be useful in water treatment. The work is based on the rational prediction of the membrane mass transfer coefficient using the resistance in series model and the corresponding experimental membranes were tested with several aqueous solutions comparatively to a commercially available porous distillation membrane (PVDF). All the related data, i.e. permeation water fluxes and conductivity of the permeate, were collected for hours, in the range 3 to 7 h. The strategy was to develop pervaporation membranes by coating a porous PVDF support (122µm) with various dense layers (hydrophobic polymers: Teflon™ AF2400, PMP, PTMSP). The objective was to avoid definitely the wetting problem observed in membrane distillation while keeping approximately the permeance than the porous support. The data reported here are related to the surface property of the membranes (contact angles), to the mechanical resistance of the membranes, to the wetting phenomena observed directly and recorded by observing the variation of water flux through the membranes and to the conductivity of the water condensed at the permeate side.

| S-EPMC8005762 | biostudies-literature

Unraveling the Catalytic Graphitization Mechanism of Ni–P Electroless Plated Cokes via In Situ Analytical Approaches

Project description: Not available

| S-EPMC10870289 | biostudies-literature

Eco-Friendly Electroless Template Synthesis of Cu-Based Composite Track-Etched Membranes for Sorption Removal of Lead(II) Ions.

Project description:This paper reports the synthesis of composite track-etched membranes (TeMs) modified with electrolessly deposited copper microtubules using copper deposition baths based on environmentally friendly and non-toxic reducing agents (ascorbic acid (Asc), glyoxylic acid (Gly), and dimethylamine borane (DMAB)), and comparative testing of their lead(II) ion removal capacity via batch adsorption experiments. The structure and composition of the composites were investigated by X-ray diffraction technique and scanning electron and atomic force microscopies. The optimal conditions for copper electroless plating were determined. The adsorption kinetics followed a pseudo-second-order kinetic model, which indicates that adsorption is controlled by the chemisorption process. A comparative study was conducted on the applicability of the Langmuir, Freundlich, and Dubinin-Radushkevich adsorption models to define the equilibrium isotherms and the isotherm constants for the prepared composite TeMs. Based on the regression coefficients R2, it has been shown that the Freundlich model better describes the experimental data of the composite TeMs on the adsorption of lead(II) ions.

| S-EPMC10220658 | biostudies-literature

Computational Investigation of the Effect of Lipid Membranes on Ion Permeation in Gramicidin A.

Project description:Membrane proteins are embedded in a lipid bilayer and interact with the lipid molecules in subtle ways. This can be studied experimentally by examining the effect of different lipid bilayers on the function of membrane proteins. Understanding the causes of the functional effects of lipids is difficult to dissect experimentally but more amenable to a computational approach. Here we perform molecular dynamics simulations and free energy calculations to study the effect of two lipid types (POPC and NODS) on the conductance of the gramicidin A (gA) channel. A larger energy barrier is found for the K? potential of mean force in gA embedded in POPC compared to that in NODS, which is consistent with the enhanced experimental conductance of cations in gA embedded in NODS. Further analysis of the contributions to the potential energy of K? reveals that gA and water molecules in gA make similar contributions in both bilayers but there are significant differences between the two bilayers when the lipid molecules and interfacial waters are considered. It is shown that the stronger dipole moments of the POPC head groups create a thicker layer of interfacial waters with better orientation, which ultimately is responsible for the larger energy barrier in the K? PMF in POPC.

| S-EPMC4812426 | biostudies-literature

Computational Investigation of Dual Filler-Incorporated Polymer Membranes for Efficient CO2 and H2 Separation: MOF/COF/Polymer Mixed Matrix Membranes

Project description:Mixed matrix membranes (MMMs) composed of two different

| S-EPMC9936544 | biostudies-literature