Dataset Information

Deskilled and Rapid Drug-Resistant Gene Detection by Centrifugal Force-Assisted Thermal Convection PCR Device.

ABSTRACT: Here we report the improved Cyclo olefin polymer (COP) microfluidic chip and polymerase chain reaction (PCR) amplification system for point-of-care testing (POCT) in rapid detection of Carbapenem-resistant Enterobacteriaceae (CRE). The PCR solution and thermal cycling is controlled by the relative gravitational acceleration (7G) only and is expected to pose minimal problem in operation by non-expert users. Detection is based on identifying the presence of carbapenemase encoding gene through the corresponding fluorescence signal after amplification. For preliminary tests, the device has been demonstrated to detect bla_IMP-6 from patients stool samples. From the prepared samples, 96.4 fg/µL was detected with good certainty within 15 min (~106 thermocycles,) which is significantly faster than the conventional culture plate method. Moreover, the device is expected to detect other target genes in parallel as determination of the presence of bla_NDM-1 and bla_OXA-23 from control samples has also been demonstrated. With the rising threat of drug-resistant bacteria in global healthcare, this technology can greatly aid the health sector by enabling the appropriate use of antibiotics, accelerating the treatment of carriers, and suppressing the spread.

SUBMITTER: Espulgar WV

PROVIDER: S-EPMC7916093 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Deskilled and Rapid Drug-Resistant Gene Detection by Centrifugal Force-Assisted Thermal Convection PCR Device.

Espulgar Wilfred Villariza WV Saito Masato M Takahashi Kazuya K Ushiro Sakiko S Yamamoto Norihisa N Akeda Yukihiro Y Hamaguchi Shigeto S Tomono Kazunori K Tamiya Eiichi E

Sensors (Basel, Switzerland) 20210209 4

Here we report the improved Cyclo olefin polymer (COP) microfluidic chip and polymerase chain reaction (PCR) amplification system for point-of-care testing (POCT) in rapid detection of Carbapenem-resistant Enterobacteriaceae (CRE). The PCR solution and thermal cycling is controlled by the relative gravitational acceleration (7G) only and is expected to pose minimal problem in operation by non-expert users. Detection is based on identifying the presence of carbapenemase encoding gene through the ...[more]

PMID: 33572363

Similar Datasets

Project description:Embedding liquid metals (LMs) into an elastomer is emerging as a promising strategy for stretchable conductors. Existing manufacturing techniques are struggling between spatial resolution and process complexity and are limited to chemically resistant substrates. Here, we report on a hybrid process combining stencil lithography and centrifugal force-assisted patterning of liquid metal for the development of LM-based stretchable conductors. The selective wetting behavior of oxide-removed eutectic gallium-indium (EGaIn) on metal patterns defined by stencil lithography enables micrometer scale LM patterns on an elastomeric substrate. Stencil lithography allows for defining metal regions without harsh chemical treatments, making it suitable for a wide range of substrates. Microscale LM patterns are achieved by efficiently removing the excess material by the centrifugal forces experienced from spinning the substrate. The proposed approach allows for the creation of LM patterns with a line width as small as 2 μm on a stretchable poly(dimethylsiloxane) (PDMS) substrate. The electrical measurement results show that the fabricated EGaIn devices can endure 40% mechanical strain over several thousands of cycles. Furthermore, a stencil design using microbridges is proposed to address the mechanical stability issue in stencil lithography. An EGaIn conductor with a serpentine structure and an interdigitated capacitor are fabricated and characterized. The results demonstrate that the patterned serpentine conductors retain their functionality with applied mechanical strain up to 80%. The performance of the interdigitated capacitors upon applied strain is in good agreement with the theoretical estimation. Finally, we demonstrate our approach also on poly(octamethylene maleate (anhydride) citrate) (POMaC) substrates to broaden the use of the proposed method to not only flexible and stretchable but also biodegradable substrates, opening a way for in vivo transient microsystem engineering. The work presented here provides a versatile and reliable approach for manufacturing stretchable conductors.

Project description:BackgroundCentrifugation is routinely employed in handling the ejaculates of some species, but it is not part of the commonly used protocols in ram. However, the development and implementation of new assisted reproductive technologies, alternative preservation models based on washing sperm from a cellular ageing-accelerating substance such as the seminal plasma, and basic studies in spermatology is associated with the use of centrifugation. This requires a specific evaluation of the centrifugation protocols considering the species-specific relationship with the potential damage produced by this procedure. No previous studies have determined the effect of different centrifugation forces on ram sperm. Therefore, we aimed to assess the performance of three centrifugal forces (600×g, 3000×g, and 6000×g for 10 min at room temperature) and their effects on ram sperm motility and functionality.ResultsSperm motility and functionality parameters were assessed at 0 h and after 2 h of incubation at 37 °C. As expected, a higher cell packaging degree was obtained at high centrifugation forces (P ≤ 0.0001). Cell packaging was unstable at all centrifugal forces. Thus, there was a high cell resuspension rate after less than 2 min. Regarding sperm quality, there was a change in movement pattern of 3000×g and 6000×g centrifuged sperm after 2 h of incubation at 37 °C, characterized by an increase in rapid progressive motility, linearity, straightness, and beat frequency, and a decrease in medium progressive motility, curvilinear velocity, path velocity, and head lateral amplitude. Non-significant differences were obtained among the different treatments concerning the total viability. However, we observed a significant increase (P ≤ 0.05) in the percentage of viable apoptotic sperm in the samples centrifuged at 6000×g at 0 h.ConclusionsCentrifugal forces equal to or greater than 3000×g induced some deleterious effects in ram sperm quality, and lower forces did not provide a successful cell packaging degree.

Project description:BackgroundMany modern molecular diagnostic assays targeting nucleic acids are typically confined to developed countries or to the national reference laboratories of developing-world countries. The ability to make technologies for the rapid diagnosis of infectious diseases broadly available in a portable, low-cost format would mark a revolutionary step forward in global health. Many molecular assays are also developed based on polymerase chain reactions (PCR), which require thermal cyclers that are relatively heavy (>20 pounds) and need continuous electrical power. The temperature ramping speed of most economical thermal cyclers are relatively slow (2 to 3 °C/s) so a polymerase chain reaction can take 1 to 2 hours. Most of all, these thermal cyclers are still too expensive ($2k to $4k) for low-resource setting uses.Methodology/principal findingsIn this article, we demonstrate the development of a low-cost and rapid water bath based thermal cycler that does not require active temperature control or continuous power supply during PCR. This unit costs $130 to build using commercial off-the-shelf items. The use of two or three vacuum-insulated stainless-steel Thermos food jars containing heated water (for denaturation and annealing/extension steps) and a layer of oil on top of the water allow for significantly stabilized temperatures for PCR to take place. Using an Arduino-based microcontroller, we automate the "archaic" method of hand-transferring PCR tubes between water baths.Conclusions/significanceWe demonstrate that this innovative unit can deliver high speed PCR (17 s per PCR cycle) with the potential to go beyond the 1,522 bp long amplicons tested in this study and can amplify from templates down to at least 20 copies per reaction. The unit also accepts regular PCR tubes and glass capillary tubes. The PCR efficiency of our thermal cycler is not different from other commercial thermal cyclers. When combined with a rapid nucleic acid detection approach, the thermos thermal cycler (TTC) can enable on-site molecular diagnostics in low-resource settings.

Dataset Information

Deskilled and Rapid Drug-Resistant Gene Detection by Centrifugal Force-Assisted Thermal Convection PCR Device.

Publications

Deskilled and Rapid Drug-Resistant Gene Detection by Centrifugal Force-Assisted Thermal Convection PCR Device.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets