Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Integrating a Low-Cost Electronic Nose and Machine Learning Modelling to Assess Coffee Aroma Profile and Intensity.

ABSTRACT: Aroma is one of the main attributes that consumers consider when appreciating and selecting a coffee; hence it is considered an important quality trait. However, the most common methods to assess aroma are based on expensive equipment or human senses through sensory evaluation, which is time-consuming and requires highly trained assessors to avoid subjectivity. Therefore, this study aimed to estimate the coffee intensity and aromas using a low-cost and portable electronic nose (e-nose) and machine learning modeling. For this purpose, triplicates of nine commercial coffee samples with different intensity levels were used for this study. Two machine learning models were developed based on artificial neural networks using the data from the e-nose as inputs to (i) classify the samples into low, medium, and high-intensity (Model 1) and (ii) to predict the relative abundance of 45 different aromas (Model 2). Results showed that it is possible to estimate the intensity of coffees with high accuracy (98%; Model 1), as well as to predict the specific aromas obtaining a high correlation coefficient (R = 0.99), and no under- or over-fitting of the models were detected. The proposed contactless, nondestructive, rapid, reliable, and low-cost method showed to be effective in evaluating volatile compounds in coffee, which is a potential technique to be applied within all stages of the production process to detect any undesirable characteristics on-time and ensure high-quality products.

SUBMITTER: Gonzalez Viejo C

PROVIDER: S-EPMC7998415 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Design and Validation of a Portable Machine Learning-Based Electronic Nose.

Project description:Volatile organic compounds (VOCs) are chemicals emitted by various groups, such as foods, bacteria, and plants. While there are specific pathways and biological features significantly related to such VOCs, detection of these is achieved mostly by human odor testing or high-end methods such as gas chromatography-mass spectrometry that can analyze the gaseous component. However, odor characterization can be quite helpful in the rapid classification of some samples in sufficient concentrations. Lower-cost metal-oxide gas sensors have the potential to allow the same type of detection with less training required. Here, we report a portable, battery-powered electronic nose system that utilizes multiple metal-oxide gas sensors and machine learning algorithms to detect and classify VOCs. An in-house circuit was designed with ten metal-oxide sensors and voltage dividers; an STM32 microcontroller was used for data acquisition with 12-bit analog-to-digital conversion. For classification of target samples, a supervised machine learning algorithm such as support vector machine (SVM) was applied to classify the VOCs based on the measurement results. The coefficient of variation (standard deviation divided by mean) of 8 of the 10 sensors stayed below 10%, indicating the excellent repeatability of these sensors. As a proof of concept, four different types of wine samples and three different oil samples were classified, and the training model reported 100% and 98% accuracy based on the confusion matrix analysis, respectively. When the trained model was challenged against new sets of data, sensitivity and specificity of 98.5% and 98.6% were achieved for the wine test and 96.3% and 93.3% for the oil test, respectively, when the SVM classifier was used. These results suggest that the metal-oxide sensors are suitable for usage in food authentication applications.

| S-EPMC8201040 | biostudies-literature

Development of a Low-Cost Portable Electronic Nose for Cigarette Brands Identification.

Project description:In China, the government and the cigarette industry yearly lose millions in sales and tax revenue because of imitation cigarettes. Usually, visual observation is not enough to identify counterfeiting. An auxiliary analytical method is needed for cigarette brands identification. To this end, we developed a portable, low-cost electronic nose (e-nose) system for brand recognition of cigarettes. A gas sampling device was designed to reduce the influence caused by humidity fluctuation and the volatile organic compounds (VOCs) in the environment. To ensure the uniformity of airflow distribution, the structure of the sensing chamber was optimized by computational fluid dynamics (CFD) simulations. The e-nose system is compact, portable, and lightweight with only 15 cm in side length and the cost of the whole device is less than $100. Results from the machine learning algorithm showed that there were significant differences between 5 kinds of cigarettes we tested. Random Forest (RF) has the best performance with accuracy of 91.67% and K Nearest Neighbor (KNN) has the accuracy of 86.98%, which indicated that the e-nose was able to discriminate samples. We believe this portable, cheap, reliable e-nose system could be used as an auxiliary screen technique for counterfeit cigarettes.

| S-EPMC7435456 | biostudies-literature

Potential Aroma Chemical Fingerprint of Oxidised Coffee Note by HS-SPME-GC-MS and Machine Learning

Project description:This study examines the volatilome of good and oxidised coffee samples from two commercial coffee species (i.e., Coffea arabica (arabica) and Coffea canephora (robusta)) in different packagings (i.e., standard with aluminium barrier and Eco-caps) to define a fingerprint potentially describing their oxidised note, independently of origin and packaging. The study was carried out using HS-SPME-GC-MS/FPD in conjunction with a machine learning data processing. PCA and PLS-DA were used to extrapolate 25 volatiles (out of 147) indicative of oxidised coffees, and their behaviour was compared with literature data and critically discussed. An increase in four volatiles was observed in all oxidised samples tested, albeit to varying degrees depending on the blend and packaging: acetic and propionic acids (pungent, acidic, rancid), 1-H-pyrrole-2-carboxaldehyde (musty), and 5-(hydroxymethyl)-dihydro-2(3H)-furanone.

| S-EPMC9778272 | biostudies-literature

Prediction of coffee aroma from single roasted coffee beans by hyperspectral imaging.

Project description:Coffee aroma is critical for consumer liking and enables price differentiation of coffee. This study applied hyperspectral imaging (1000-2500 nm) to predict volatile compounds in single roasted coffee beans, as measured by Solid Phase Micro Extraction-Gas Chromatography-Mass Spectrometry and Gas Chromatography-Olfactometry. Partial least square (PLS) regression models were built for individual volatile compounds and chemical classes. Selected key aroma compounds were predicted well enough to allow rapid screening (R2 greater than 0.7, Ratio to Performance Deviation (RPD) greater than 1.5), and improved predictions were achieved for classes of compounds - e.g. aldehydes and pyrazines (R2 ∼ 0.8, RPD ∼ 1.9). To demonstrate the approach, beans were successfully segregated by HSI into prototype batches with different levels of pyrazines (smoky) or aldehydes (sweet). This is industrially relevant as it will provide new rapid tools for quality evaluation, opportunities to understand and minimise heterogeneity during production and roasting and ultimately provide the tools to define and achieve new coffee flavour profiles.

| S-EPMC8617352 | biostudies-literature

Low-Power and Low-Cost Environmental IoT Electronic Nose Using Initial Action Period Measurements.

Project description:In this work, we present a complete hardware development and current consumption study of a portable electronic nose designed for the Internet-of-Things (IoT). Thanks to the technique of measuring in the initial action period, it can be reliably powered with a moderate-sized battery. The system is built around the well-known SoC (System on Chip) ESP8266EX, using low-cost electronics and standard sensors from Figaro's TGS26xx series. This SoC, in addition to a powerful microcontroller, provides Wi-Fi connectivity, making it very suitable for IoT applications. The system also includes a precision analog-to-digital converter for the measurements and a charging module for the lithium battery. During its operation, the designed software takes measurements periodically, and keeps the microcontroller in deep-sleep state most of the time, storing several measurements before uploading them to the cloud. In the experiments and tests carried out, we have focused our work on the measurement and optimization of current consumption, with the aim of extending the battery life. The results show that taking measurements every 4 min and uploading data every five measurements, the battery of 750 mAh needs to be charged approximately once a month. Despite the fact that we have used a specific model of gas sensor, this methodology is quite generic and could be extended to other sensors with lower consumption, increasing very significantly the duration of the battery.

| S-EPMC6679561 | biostudies-literature

An electronic nose using a single graphene FET and machine learning for water, methanol, and ethanol.

Project description:The poor gas selectivity problem has been a long-standing issue for miniaturized chemical-resistor gas sensors. The electronic nose (e-nose) was proposed in the 1980s to tackle the selectivity issue, but it required top-down chemical functionalization processes to deposit multiple functional materials. Here, we report a novel gas-sensing scheme using a single graphene field-effect transistor (GFET) and machine learning to realize gas selectivity under particular conditions by combining the unique properties of the GFET and e-nose concept. Instead of using multiple functional materials, the gas-sensing conductivity profiles of a GFET are recorded and decoupled into four distinctive physical properties and projected onto a feature space as 4D output vectors and classified to differentiated target gases by using machine-learning analyses. Our single-GFET approach coupled with trained pattern recognition algorithms was able to classify water, methanol, and ethanol vapors with high accuracy quantitatively when they were tested individually. Furthermore, the gas-sensing patterns of methanol were qualitatively distinguished from those of water vapor in a binary mixture condition, suggesting that the proposed scheme is capable of differentiating a gas from the realistic scenario of an ambient environment with background humidity. As such, this work offers a new class of gas-sensing schemes using a single GFET without multiple functional materials toward miniaturized e-noses.

| S-EPMC8433337 | biostudies-literature

Modifying Robusta coffee aroma by green bean chemical pre-treatment.

Project description:Green Robusta beans were subjected to pre-treatment with the aim of reducing the perceived aroma difference between Arabica and Robusta coffee. Treatment was a short soaking procedure with varying concentrations of acetic acid (up to 5%). Samples were subjected to thermal treatment (roasted) and ground to a standardised particle size distribution. Aroma compounds were evaluated by headspace analysis using solid-phase microextraction and gas chromatography-mass spectrometry. Pre-treatment significantly affected aroma formation during roasting and resulted in a modified level of pyrazines, furanic compounds and sulfur-containing compounds (p?<?0.05). Principal component analysis illustrated that the aroma profile of the pre-treated Robusta coffee was closer to the target Arabica coffee after roasting. Sensory results confirmed that the aroma of the 2% acetic acid pre-treated Robusta brew was similar to Arabica; the maximum inclusion level of Robusta coffee in a blend could be increased from 20% to 80%.

| S-EPMC6191532 | biostudies-literature

Modeling Mass and Heat Transfer in Multiphase Coffee Aroma Extraction.

Project description:Instant coffee manufacture involves the aqueous extraction of soluble coffee components followed by drying to form a soluble powder. Loss of volatile aroma compounds during concentration through evaporation can lower product quality. One method of retaining aroma is to steam-strip volatiles from the coffee and add them back to a concentrated coffee solution before the final drying stage. A better understanding of the impact of process conditions on the aroma content of the stripped solution will improve product design stages. In this context, we present a multiscale model for aroma extraction describing (i) the release from the matrix, (ii) intraparticle diffusion, (iii) transfer into water and steam, and (iv) advection through the column mechanisms. Results revealed (i) the existence of three different types of compound behavior, (ii) how aroma physiochemistry determines the limiting kinetics of extraction, and (iii) that extraction for some aromas can be inhibited by the interaction with other coffee components.

| S-EPMC7304076 | biostudies-literature

Bio-benchmarking of electronic nose sensors.

Project description:BackgroundElectronic noses, E-Noses, are instruments designed to reproduce the performance of animal noses or antennae but generally they cannot match the discriminating power of the biological original and have, therefore, been of limited utility. The manner in which odorant space is sampled is a critical factor in the performance of all noses but so far it has been described in detail only for the fly antenna.MethodologyHere we describe how a set of metal oxide (MOx) E-Nose sensors, which is the most commonly used type, samples odorant space and compare it with what is known about fly odorant receptors (ORs).Principal findingsCompared with a fly's odorant receptors, MOx sensors from an electronic nose are on average more narrowly tuned but much more highly correlated with each other. A set of insect ORs can therefore sample broader regions of odorant space independently and redundantly than an equivalent number of MOx sensors. The comparison also highlights some important questions about the molecular nature of fly ORs.ConclusionsThe comparative approach generates practical learnings that may be taken up by solid-state physicists or engineers in designing new solid-state electronic nose sensors. It also potentially deepens our understanding of the performance of the biological system.

| S-EPMC2712691 | biostudies-literature

Single Origin Coffee Aroma: From Optimized Flavor Protocols and Coffee Customization to Instrumental Volatile Characterization and Chemometrics.

Project description:In this study, the aroma profile of 10 single origin Arabica coffees originating from eight different growing locations, from Central America to Indonesia, was analyzed using Headspace SPME-GC-MS as the analytical method. Their roasting was performed under temperature-time conditions, customized for each sample to reach specific sensory brew characteristics in an attempt to underline the customization of roast profiles and implementation of separate roastings followed by subsequent blending as a means to tailor cup quality. A total of 138 volatile compounds were identified in all coffee samples, mainly furan (~24-41%) and pyrazine (~25-39%) derivatives, many of which are recognized as coffee key odorants, while the main formation mechanism was the Maillard reaction. Volatile compounds' composition data were also chemometrically processed using the HCA Heatmap, PCA and HCA aiming to explore if they meet the expected aroma quality attributes and if they can be an indicator of coffee origin. The desired brew characteristics of the samples were satisfactorily captured from the volatile compounds formed, contributing to the aroma potential of each sample. Furthermore, the volatile compounds presented a strong variation with the applied roasting conditions, meaning lighter roasted samples were efficiently differentiated from darker roasted samples, while roasting degree exceeded the geographical origin of the coffee. The coffee samples were distinguished into two groups, with the first two PCs accounting for 73.66% of the total variation, attributed mainly to the presence of higher quantities of furans and pyrazines, as well as to other chemical classes (e.g., dihydrofuranone and phenol derivatives), while HCA confirmed the above results rendering roasting conditions as the underlying criterion for differentiation.

| S-EPMC8346979 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data