Iron Elution from Iron and Steel Slag Using Bacterial Complex Identified from the Seawater
Ontology highlight
ABSTRACT:
SUBMITTER: Tsukidate H
PROVIDER: S-EPMC8002712 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Carbon dioxide sequestration via carbonation of steel slags is a promising way of combining two waste products to create value. Understanding the dissolution kinetics of steel slags, which are alkaline and rich in calcium, in acidic media is essential to configure such a process. In this study, we seek to analyse the dissolution mechanism from experimental studies and develop a mathematical model considering the heterogeneous characteristics of slag. We found that the reduction in calcium extraction efficiency with an increase in particle size, which is normally associated with surface passivation or non-uniformity of samples, can be explained by considering the morphological features associated with the distribution of MgO-FeO (RO) phase in the calcium silicate matrix. We present a population balance model and show that the reduction in calcium extraction efficiency in coarse particle fractions is due to increased sporulation of the RO phase. The findings in the study suggest that the leaching of metal ions from slag is controlled by proton-promoted surface dissolution reaction, where the dependence of acid concentration follows the Langmuir-Hinshelwood adsorption isotherm. The model shows good agreement with a large set of parametric studies and demonstrates the importance of considering morphological features, as we progress towards development of a priori dissolution models for multi-mineral oxides and silicates.
| S-EPMC6501660 | biostudies-literature
Project description:The disposal of slag generated by the steel industry can have negative consequences upon the surrounding aquatic environment by the generation of high pH waters, leaching of potentially problematic trace metals, and rapid rates of calcite precipitation which smother benthic habitats. A 36-year dataset was collated from the long-term ambient monitoring of physicochemical parameters and elemental concentrations of samples from two steel slag leachate-affected watercourses in northern England. Waters were typified by elevated pH (>10), high alkalinity, and were rich in dissolved metals (e.g. calcium (Ca), aluminium (Al), and zinc (Zn)). Long-term trend analysis was performed upon pH, alkalinity, and Ca concentration which, in addition to Ca flux calculations, were used to highlight the longevity of pollution arising as a result of the dumping and subsequent leaching of steel slags. Declines in calcium and alkalinity have been modest over the monitoring period and not accompanied by significant declines in water pH. If the monotonic trends of decline in alkalinity and calcium continue in the largest of the receiving streams, it will be in the region of 50-80 years before calcite precipitation would be expected to be close to baseline levels, where ecological impacts would be negligible.
| S-EPMC4483270 | biostudies-literature
Project description:Microbial electrochemical technologies have revealed the opportunity of electrochemical enrichment for specific bacterial groups that are able to catalyze reactions of interest. However, there are unsolved challenges towards their application under aggressive environmental conditions, such as in the sea. This study demonstrates the impact of surface electrochemical potential on community composition and its corrosivity. Electrochemical bacterial enrichment was successfully carried out in natural seawater without nutrient amendments. Experiments were carried out for ten days of exposure in a closed-flow system over 316L stainless steel electrodes under three different poised potentials (-150 mV, +100 mV, and +310 mV vs. Ag/AgCl). Weight loss and atomic force microscopy showed a significant difference in corrosion when +310 mV (vs. Ag/AgCl) was applied in comparison to that produced under the other tested potentials (and an unpoised control). Bacterial community analysis conducted using 16S rRNA gene profiles showed that poised potentials are more positive as +310 mV (vs. Ag/AgCl) resulted in strong enrichment for Rhodobacteraceae and Sulfitobacter. Hence, even though significant enrichment of the known electrochemically active bacteria from the Rhodobacteraceae family was accomplished, the resultant bacterial community could accelerate pitting corrosion in 316 L stainless steel, thereby compromising the durability of the electrodes and the microbial electrochemical technologies.
| S-EPMC7288148 | biostudies-literature
Project description:Fly ash and slag were produced as a result of the incineration of municipal sewage sludge using the circulating fluidized bed combustion (CFBC) technology and were examined for the simultaneous recovery of lithium and uranium from seawater in batch adsorption experiments. These waste materials have been characterized in terms of their physicochemical properties using several research methods including particle size distribution, bulk density, SEM-EDS analysis, thermogravimetry, SEM and TEM morphology, BET, specific surface area, pore volume distribution by the BJH method, ATR FT-IR, and zeta potential. The fly ash and slag waste materials showed the following research results for Li-ion recovery: adsorption efficiency 12.1% and 6.8%, adsorption capacity 0.55 mg g-1 and 0.15 mg g-1, respectively. Better results were reported for U ion recovery: adsorption efficiency 98.4% and 99.9%, adsorption capacity 21.3 mg g-1 and 56.7 mg g-1 for fly ash and slag, respectively. In conclusion, the conducted research revealed that CFBC fly ash and slag are promising low-cost adsorbents for the effective recovery of Li and U ions from seawater.
| S-EPMC9036370 | biostudies-literature
Project description:The volume of slags generated from the steel industry is a source of possible resources which is constantly increasing. Specifically, in the production of stainless steel, specific and singular slags with unique characteristics are obtained, which allows considering an approach aimed at their use in new recycling ways. This work shows the feasibility of using stainless steel slag as a substitute for limestone filler in the manufacture of self-compacting concrete. The influence of different treatments applied to slags on physical and chemical properties was studied. On the other hand, the mechanical behaviour, as well as the durability acquired in self-compacting concrete, has been analysed. Very encouraging results were obtained, since this research demonstrates the possible application of this stainless steel slag as a construction material, improving sustainability and promoting circular economy processes, which are achieved through the minimisation of the waste disposal and accumulation.
| S-EPMC7254312 | biostudies-literature
Project description:Both steelmaking via an electric arc furnace and manufacturing of portland cement are energy-intensive and resource-exploiting processes, with great amounts of carbon dioxide (CO2) emission and alkaline solid waste generation. In fact, most CO2 capture and storage technologies are currently too expensive to be widely applied in industries. Moreover, proper stabilization prior to utilization of electric arc furnace slag are still challenging due to its high alkalinity, heavy metal leaching potentials and volume instability. Here we deploy an integrated approach to mineralizing flue gas CO2 using electric arc furnace slag while utilizing the reacted product as supplementary cementitious materials to establish a waste-to-resource supply chain toward a circular economy. We found that the flue gas CO2 was rapidly mineralized into calcite precipitates using electric arc furnace slag. The carbonated slag can be successfully utilized as green construction materials in blended cement mortar. By this modulus, the global CO2 reduction potential using iron and steel slags was estimated to be ~138 million tons per year.
| S-EPMC5722910 | biostudies-literature
Project description:Microorganisms can increase the open-circuit potential of stainless steel immersed in seawater of several hundred millivolts in a phenomenon called ennoblement. It raises the chance of corrosion as the open-circuit potential may go over the pitting corrosion potential. Despite the large impact of the ennoblement, no unifying mechanisms have been described as responsible for the phenomenon. Here we show that the strict electrotroph bacterium "Candidatus Tenderia electrophaga" is detected as an ennoblement biomarker and is only present at temperatures at which we observe ennoblement. This bacterium was previously enriched in biocathode systems. Our results suggest that "Candidatus Tenderia electrophaga," and its previously described extracellular electron transfer metabolism coupled to oxygen reduction activity, could play a central role in modulating stainless steel open-circuit potential and consequently mediating ennoblement.
| S-EPMC6374330 | biostudies-literature
Project description:The interfacial adhesion between asphalt and steel slag aggregate is a decisive factor in the formation of an asphalt-steel slag mixture and significantly affects the quality stability of steel slag-asphalt mixtures. In this study, the adhesion between an asphalt and steel slag aggregate, the interfacial microstructure, the adsorption and desorption characteristics, and chemical reactions were, respectively, explored by a PosiTestAT-A adhesion puller, a scanning electron microscope, a net adsorption test, an infrared spectrometer, and a dynamic shear rheometer. The mechanism of adhesion between the asphalt and steel slag aggregate was analyzed from the perspectives of physical adsorption and chemical reactions. The results showed that different factors had different effects on the adhesion of asphalt-steel slag aggregate interface. The freeze-thaw cycle and steel slag aggregate particle size had significant effects on interfacial adhesion, while the asphalt heating temperature, water bath time, and stirring time had relatively weak effects on interfacial adhesion. Compared to a limestone aggregate, the steel slag-asphalt mixture had greater adhesion and better adhesion performance because the pits and textures on the surface of the steel slag aggregate produced a skeleton-like effect that strengthened the phase strength of the asphalt-slag aggregate interface, thereby improving the adhesion and increasing the physical adsorption between the asphalt and steel slag aggregate. In addition, due to the N-H stretching vibrations of the amines and amides, as well as SiO-H stretching vibrations, a chemical reaction occurred between the asphalt and steel slag aggregate, thus improving the adhesion performance between the asphalt and steel slag. Based on the shape of the adsorption isotherm, it was determined that the adsorption type was multi-molecular layer adsorption, indicating that the adhesion between the asphalt and steel slag mainly involved physical adsorption.
| S-EPMC7085118 | biostudies-literature
Project description:The cultivation of aromatic plants for the extraction of essential oils has been presented as an innovative and economically viable alternative for the remediation of areas polluted with trace elements (TE). Therefore, this study focuses on the contribution of the cultivation of coriander and the use of arbuscular mycorrhizal fungi (AMF) in combination with mineral amendments (steel slag) on the bacterial function of the rhizosphere, an aspect that is currently poorly understood and studied. The introduction of soil amendments, such as steel slag or mycorrhizal inoculum, had no significant effect on coriander growth. However, steel slag changed the structure of the bacterial community in the rhizosphere without affecting microbial function. In fact, Actinobacteria were significantly less abundant under slag-amended conditions, while the relative proportion of Gemmatimonadota increased. On the other hand, the planting of coriander affects the bacterial community structure and significantly increased the bacterial functional richness of the amended soil. Overall, these results show that planting coriander most affected the structure and functioning of bacterial communities in the TE-polluted soils and reversed the effects of mineral amendments on rhizosphere bacterial communities and their activities. This study highlights the potential of coriander, especially in combination with steel slag, for phytomanagement of TE-polluted soils, by improving soil quality and health.
| S-EPMC9920375 | biostudies-literature
Project description:A kinetic model was developed using FactSage Macro Processing to simulate the re-oxidation of ultra-low carbon steel via different oxidising slags. The calculated results show good agreement with experimental laboratory thermal simulation data. Therefore, the model can be used to predict the change behaviour of slag-metal-inclusion in the re-oxidation reaction of liquid steel. It can provide prediction and guidance for an accurate secondary oxidation control process. During the slag re-oxidation process, when the oxygen in the steel is supersaturated and the slag is low in oxidation, it can easily form stick-like and dendritic shape inclusions of Al2O3 in steel. As the (FeO) content increases in slag, the oxygen transfer from slag to steel is evident, and the inclusion size increases, showing clusters and spherical shapes. In addition, supersaturated oxygen in steel easily forms unstable Al2O3-TiOx inclusions with [Ti]. As the components of liquid steel tend to be uniform, the Al2O3-TiOx inclusions will decompose and disappear, forming stable Al2O3 and TiO2 inclusions. The number of inclusions can be reduced by increasing the basicity and the ratio of CaO to Al2O3 in the initial slag.
| S-EPMC7287072 | biostudies-literature