Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Acid-Catalyzed Conversion of Cellulose Into Levulinic Acid With Biphasic Solvent System.

ABSTRACT: In this work, acid-catalyzed conversion of cellulose into levulinic acid in a biphasic solvent system was developed. Compared to a series of catalysts investigated in this study, the Amberlyst-15 as a more efficient acid catalyst was used in the hydrolysis of cellulose and further dehydration of derived intermediates into levulinic acid. Besides, the mechanism of biphasic solvent system in the conversion of cellulose was studied in detail, and the results showed biphasic solvent system can promote the conversion of cellulose and suppress the polymerization of the by-products (such as lactic acid).The reaction conditions, such as temperature, time, and catalyst loading were changed to investigate the effect on the yield of levulinic acid. The results indicated that an appealing LA yield of 59.24% was achieved at 200°C and 180 min with a 2:1 ratio of Amberlyst-15 catalyst and cellulose in GVL/H₂O under N₂ pressure. The influence of different amounts of NaCl addition to this reaction was also investigated. This study provides an economical and environmental-friendly method for the acid-catalyzed conversion of cellulose and high yield of the value-added chemical.

SUBMITTER: Ma C

PROVIDER: S-EPMC8010141 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Efficient conversion of glucosamine to levulinic acid in a sulfamic acid-catalyzed hydrothermal reaction.

Project description:Glucosamine is a monomer of chitosan, which is a biopolymer derived from the exoskeletons of crustaceans. This work investigated the conversion of glucosamine into the platform chemical levulinic acid (LA), in a sulfamic acid-catalyzed hydrothermal reaction. The optimized results of LA production showed that the conditions of 200 °C, 125 g L-1 glucosamine, 0.3 M sulfamic acid, and 15 min produced a 33.76 ± 0.19 mol% LA yield. The same conditions produced only 0.14 mol% 5-HMF yield. These results show that glucosamine is a potential bioresource to produce platform chemicals. Also, in the field of biofuels and chemical synthesis processes, the catalytic system using sulfamic acid is significant.

| S-EPMC9077563 | biostudies-literature

Solid-state NMR studies of solvent-mediated, acid-catalyzed woody biomass pre-treatment for enzymatic conversion of residual cellulose.

Project description:Enzymes selectively hydrolyze the carbohydrate fractions of lignocellulosic biomass into corresponding sugars, but these processes are limited by low yields and slow catalytic turnovers. Under certain conditions, the rates and yields of enzymatic sugar production can be increased by pretreating biomass using solvents, heat and dilute acid catalysts. However, the mechanistic details underlying this behavior are not fully elucidated, and designing effective pretreatment strategies remains an empirical challenge. Herein, using a combination of solid-state and high-resolution magic-angle-spinning NMR, infrared spectroscopy and X-ray diffractometry, we show that the extent to which cellulase enzymes are able to hydrolyze solvent-pretreated biomass can be understood in terms of the ability of the solvent to break the chemical linkages between cellulose and non-cellulosic materials in the cell wall. This finding is of general significance to enzymatic biomass conversion research, and implications for designing improved biomass conversion strategies are discussed. These findings demonstrate the utility of solid-state NMR as a tool to elucidate the key chemical and physical changes that occur during the liquid-phase conversion of real biomass.

| S-EPMC8415743 | biostudies-literature

One-step Conversion of Levulinic Acid to Succinic Acid Using I2/t-BuOK System: The Iodoform Reaction Revisited.

Project description:The iodoform reaction has long been used as a qualitative test for acetyl and/or ethanol units in organic molecules. However, its synthetic applications are quite limited. Here, we describe a tuned iodoform reaction for oxidative demethylation reaction with I2 and t-BuOK in t-BuOH, in which in situ-generated t-BuOI serves as the chemoselective iodinating agent. This system enables one-step conversion of levulinic acid to succinic acid, a major four-carbon chemical feedstock. This oxidative demethylation is also applicable to other compounds containing an acetyl group/ethanol unit, affording the corresponding carboxylic acids in a selective manner.

| S-EPMC5740180 | biostudies-literature

Recovery of yttrium and europium from spent fluorescent lamps using pure levulinic acid and the deep eutectic solvent levulinic acid-choline chloride.

Project description:A solvometallurgical approach for the recovery of rare-earth elements from lamp phosphor waste was developed. The solubility of individual phosphors in different deep-eutectic solvents (DESs) was measured. The DES levulinic acid-choline chloride (x ChCl = 0.33) showed high solubility of the YOX phosphor (Y2O3:Eu3+) and low solubility of the HALO phosphor (Sr,Ca)10(PO4)(Cl,F)2:Sb3+,Mn2+, which does not contain any rare-earth element. This DES was selected for further investigation. When the DES was compared to pure levulinic acid, very similar leaching behaviour was observed, showing that the proton activity is more important than the chloride as a metal ligand. The leaching of YOX and HALO using levulinic acid-choline chloride (x ChCl = 0.33) or pure levulinic acid was optimised in terms of water content, temperature and leaching time. The optimised parameters were validated in a synthetic mixture of phosphors and in real lamp phosphor waste. The co-dissolution of HALO is higher in the real waste than in the synthetic mixture. The real waste was also leached with an aqueous solution of hydrochloric acid, which was non-selective against dissolution of YOX, and with the functionalised ionic liquid betainium bis(trifluoromethylsulfonyl)imide. The ionic liquid gave a similar selectivity as levulinic acid, but is much more expensive. The recovery of the metals from the pregnant leach solution was tested via precipitation with oxalic acid and solvent extraction. Oxalic acid precipitation was not suitable for the DES system. The metals could be extracted via solvent extraction with the acidic extractant bis(2-ethylhexyl)phosphoric acid (D2EHPA) and stripped by an aqueous hydrochloric acid solution. Pure levulinic acid was found to be more suitable than the corresponding ChCl-based DES for the selective recovery of YOX.

| S-EPMC9055884 | biostudies-literature

Environmental and Safety Assessments of Industrial Production of Levulinic Acid via Acid-Catalyzed Dehydration.

Project description:These days, there is a need to develop novel and emerging processing pathways that permit production of value-added substances and fuels considering sustainability aspects. In this sense, levulinic acid (LA) is one of the most promising biorefinery products. This paper presents environmental and safety assessments of LA production via acid-catalyzed dehydration (ACD) of biomass. The process was modeled by using Aspen Plus process simulation software based on a capacity of 132 000 tons per annum of banana rachis (main raw material). Likewise, environmental and safety assessments were developed. Parameters such as heats of reaction, explosivity, toxicity of substances, and operational conditions along with extended mass and energy balances were used to perform safety and environmental analyses. In this regard, the modeled topology showed an inherent safety index (ISI) score of 24 with an equal contribution of 12 points for both chemical inherent safety index (CIS) and process inherent safety index (PIS). ACD showed a good safety performance, with moderate concerns related to the handling of formic acid. Moreover, the waste reduction algorithm (WAR) was used to assess environmental performance and estimate potential environmental impacts (PEIs) of the simulated topology. It was performed considering four case studies to determine the influence of mass streams (case 1), product streams (case 2), energy streams (case 3), and simultaneous products and energy contribution (case 4). This analysis showed that for this process, the total inletting flow of impacts that enter was less than the amount of these that leave the system according to a generation rate of the PEI for case 1 (-1.89 × 102 PEI/h) and case 3 (-1.83 × 102 PEI/h). From the environmental viewpoint, the major concern is associated with the photochemical oxidation potential category because of the handling of volatile organic compounds through the process.

| S-EPMC6941184 | biostudies-literature

Levulinic Acid.

Project description:The title compound (systematic name4-oxo-penta-noic acid), C5H8O3, is close to planar (r.m.s. deviation = 0.0762?Å). In the crystal, the mol-ecules inter-act via O-H?O hydrogen bonds in which the hy-droxy O atoms act as donors and the ketone O atoms in adjacent mol-ecules as acceptors, forming C(7) chains along [20-1].

| S-EPMC3884454 | biostudies-literature

Conversion of Sugars and Biomass to Furans Using Heterogeneous Catalysts in Biphasic Solvent Systems.

Project description:Within the last decade, interest in using biphasic systems for producing furans from biomass has grown significantly. Biphasic systems continuously extract furans into the organic phase, which prevents degradation reactions and potentially allows for easier separations of the products. Several heterogeneous catalyst types, including zeolites, ion exchange resins, niobium-based, and others, have been used with various organic solvents to increase furan yields from sugar dehydration reactions. In this minireview, we summarized the use of heterogeneous catalysts in biphasic systems for furfural and 5-hydroxymethylfurfural production from the past five years, highlighting trends in chemical and physical properties that effect catalytic activity. Additionally, the selection of an organic solvent for a biphasic system is extremely important and we review and discuss properties of the most commonly used organic solvents.

| S-EPMC6283062 | biostudies-literature

Nanostructured Nickel/Silica Catalysts for Continuous Flow Conversion of Levulinic Acid to γ-Valerolactone.

Project description:Selective transformation of levulinic acid (LA) to γ-valerolactone (GVL) using novel heterogeneous catalysts is one of the promising strategies for viable biomass processing. In this framework, we developed a continuous flow process for the selective hydrogenation of LA to GVL using several nanostructured Ni/SiO2 catalysts. The structural, textural, acidic, and redox properties of Ni/SiO2 catalysts, tuned by selectively varying the Ni amount from 5 to 40 wt %, were critically investigated using numerous materials characterization techniques. Electron microscopy images showed the formation of uniformly dispersed Ni nanoparticles on the SiO2 support, up to 30% Ni loading (average particle size is 9.2 nm), followed by a drastic increase in the particles size (21.3 nm) for 40% Ni-loaded catalyst. The fine dispersion of Ni particles has elicited a synergistic metal-support interaction, especially in 30% Ni/SiO2 catalyst, resulting in enhanced acidic and redox properties. Among the various catalysts tested, the 30% Ni/SiO2 catalyst showed the best performance with a remarkable 98% selectivity of GVL at complete conversion of LA for 2 h reaction time. Interestingly, this catalyst showed a steady selectivity to GVL (>97%), with a 54.5% conversion of LA during 20 h time-on-stream. The best performance of 30% Ni/SiO2 catalyst was attributed to well-balanced catalytic properties, such as ample amounts of strong acidic sites and abundant active metal sites. The obtained results show a great potential of applying earth-abundant nickel/silica catalysts for upgrading biomass platform molecules into value-added chemicals and high-energy-density fuels.

| S-EPMC6644063 | biostudies-literature

Continuous Flow Synthesis of High Valuable N-Heterocycles via Catalytic Conversion of Levulinic Acid.

Project description:Graphitic carbon nitride (g-C3N4) was successfully functionalized with a low platinum loading to give rise to an effective and stable catalytic material. The synthesized g-C3N4/Pt was fully characterized by XRD, N2 physisorption, XPS, SEM-Mapping, and TEM techniques. Remarkably, XPS analysis revealed that Pt was in a dominant metallic state. In addition, XPS together with XRD and N2 physisorption measurements indicated that the g-C3N4 preserves its native structure after the platinum deposition process. g-C3N4/Pt was applied to the catalytic conversion of levulinic acid to N-heterocycles under continuous flow conditions. Reaction parameters (temperature, pressure, and concentration of levulinic acid) were studied using 3 levels for each parameter, and the best conditions were employed for the analysis of the catalyst's stability. The catalytic system displayed high selectivity to 1-ethyl-5-methylpyrrolidin-2-one and outstanding stability after 3 h of reaction.

| S-EPMC6399384 | biostudies-literature

Production of C-14 Levulinate Ester from Glucose Fermentation Liquors Catalyzed by Acidic Ionic Liquids in a Solvent-Free Self-Biphasic System.

Project description:Herein, we present the C-14 levulinate ester of 2,3-butanediol as the product of sugar fermentation liquors. The designed Brønsted acidic ionic liquid (BAIL) catalysts enable self-induced phase separation with ester products, and the role of anions has been investigated. Esterification reactions were carried out by 2,3-butanediol (2,3-BDO) and levulinic acid in solvent-free media and low temperatures (60-105 °C). For comparison, sulfuric acid, amberlite IR-120, and sulfonic acid-functionalized pyridinium ionic liquids with different anions were utilized as a catalyst upon esterification reaction. The diester product, namely, butane-2,3-diyl bis(4-oxopentanoate), was formed with a good yield (85%) and selectivity (85%) after complete conversion of 2,3-BDO in 24 h at 80 °C. The low yield (8%) of the monoester was observed. The monoester and diester were separated by a liquid-liquid extraction method. The ester products were characterized by various instrumental techniques such as 1H and 13C NMR, GC-FID, LC-MS, and FT-IR spectroscopy. The Hammett acidity functions of BAILs were determined from UV-vis spectroscopy. The catalyst was successfully recycled and reused in the processes. The spent BAILs were reused in six consecutive cycles with only a ∼7% diminished diester yield and selectivity. The produced levulinate ester will be useful as biofuel additives, solvents, plasticizers, and other applications.

| S-EPMC7081263 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data