Direct Printing of Nanostructured Holograms on Consumable Substrates.
Ontology highlight
ABSTRACT:
SUBMITTER: AlQattan B
PROVIDER: S-EPMC8023709 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Photo- and thermo-activated reactions are dominant in Additive Manufacturing (AM) processes for polymerization or melting/deposition of polymers. However, ultrasound activated sonochemical reactions present a unique way to generate hotspots in cavitation bubbles with extraordinary high temperature and pressure along with high heating and cooling rates which are out of reach for the current AM technologies. Here, we demonstrate 3D printing of structures using acoustic cavitation produced directly by focused ultrasound which creates sonochemical reactions in highly localized cavitation regions. Complex geometries with zero to varying porosities and 280 μm feature size are printed by our method, Direct Sound Printing (DSP), in a heat curing thermoset, Poly(dimethylsiloxane) that cannot be printed directly so far by any method. Sonochemiluminescnce, high speed imaging and process characterization experiments of DSP and potential applications such as remote distance printing are presented. Our method establishes an alternative route in AM using ultrasound as the energy source.
| S-EPMC8986813 | biostudies-literature
Project description:While the rapidly evolving nanotechnology has shown promise in electronics, energy, healthcare and many other fields, there is an increasing concern about the adverse health consequences of engineered nanomaterials. To accurately evaluate the toxicity of nanomaterials, in vitro models incorporated with in vivo microenvironment characteristics are desirable. This study aims to delineate the influence of nanotopography on fibrogenic response of normal human lung fibroblasts to multi-walled carbon nanotubes (MWCNTs). Nanoscale gratings and pillars of various heights were fabricated on polydimethylsiloxane substrates. Cell spreading and biomechanics were measured, and fibrogenic responses including proliferation, collagen production and reactive oxygen species generation of the fibroblasts grown on the nanostructured substrates in response to MWCNTs were assessed. It was observed that the cells could be largely stretched on shallow nanogratings, leading to stiffer cytoskeleton and nucleus, enhanced cell proliferation and collagen production, and consequently, toxic response sensitivity of the fibroblasts was undermined. In contrast, the cell spreading and stiffness could be reduced using tall, isotropic nanopillars, which significantly improved the cell toxic sensitivity to the MWCNTs. In addition to highlighting the significant influence of cell-nanotopography interactions on cell sensing CNTs, this study contributed to development of physiologically relevant in vitro models for nanotoxicology study.
| S-EPMC5608452 | biostudies-literature
Project description:Direct sound printing (DSP), an alternative additive manufacturing process driven by sonochemical polymerization, has traditionally been confined to a single acoustic focal region, resulting in a voxel-by-voxel printing approach. To overcome this limitation, we introduce holographic direct sound printing (HDSP), where acoustic holograms, storing cross-sectional images of the desired parts, pattern acoustic waves to induce regional cavitation bubbles and on-demand regional polymerization. HDSP outperforms DSP in terms of printing speed by one order of magnitude and yields layerless printed structures. In our HDSP implementation, the hologram remains stationary while the printing platform moves along a three-dimensional path using a robotic arm. We present sono-chemiluminescence and high-speed imaging experiments to thoroughly investigate HDSP and demonstrate its versatility in applications such as remote ex-vivo in-body printing and complex robot trajectory planning. We showcase multi-object and multi-material printing and provide a comprehensive process characterization, including the effects of hologram design and manufacturing on the HDSP process, polymerization progression tracking, porosity tuning, and robotic trajectory computation. Our HDSP method establishes the integration of acoustic holography in DSP and related applications.
| S-EPMC11303524 | biostudies-literature
Project description:Optical lenses are among the oldest technological innovations (3000 years ago) and they have enabled a multitude of applications in healthcare and in our daily lives. The primary function of optical lenses has changed little over time; they serve mainly as a light-collection (e.g. reflected, transmitted, diffracted) element, and the wavelength and/or intensity of the collected light is usually manipulated by coupling with various external optical filter elements or coatings. This generally results in losses associated with multiple interfacial reflections, and increases the complexity of design and construction. In this work we introduce a change in this paradigm, by integrating both light-shaping and image magnification into a single lens element using a moldless procedure that takes advantage of the physical and optical properties of mesoporous silicon (PSi) photonic crystal nanostructures. Casting of a liquid poly(dimethyl) siloxane (PDMS) pre-polymer solution onto a PSi film generates a droplet with contact angle that is readily controlled by the silicon nanostructure, and adhesion of the cured polymer to the PSi photonic crystal allows preparation of lightweight (10 mg) freestanding lenses (4.7 mm focal length) with an embedded optical component (e.g. optical rugate filter, resonant cavity, distributed Bragg reflector). Our fabrication process shows excellent reliability (yield 95%) and low cost and we expect our lens to have implications in a wide range of applications. As a proof-of-concept, using a single monolithic lens/filter element we demonstrate: fluorescence imaging of isolated human cancer cells with rejection of the blue excitation light, through a lens that is self-adhered to a commercial smartphone; shaping the emission spectrum of a white light emitting diode (LED) to tune the color from red through blue; and selection of a narrow wavelength band (bandwidth 5 nm) from a fluorescent molecular probe.
| S-EPMC7202556 | biostudies-literature
Project description:To date, fabricating three-dimensional (3D) nanostructured substrate with small nanogap was a laborious challenge by conventional fabrication techniques. In this article, we address a simple, low-cost, large-area, and spatially controllable method to fabricate 3D nanostructures, involving hemisphere, hemiellipsoid, and pyramidal pits based on nanosphere lithography (NSL). These 3D nanostructures were used as surface-enhanced Raman scattering (SERS) substrates of single Rhodamine 6G (R6G) molecule. The average SERS enhancement factor achieved up to 1011. The inevitably negative influence of the adhesion-promoting intermediate layer of Cr or Ti was resolved by using such kind of 3D nanostructures. The nanostructured quartz substrate is a free platform as a SERS substrate and is nondestructive when altering with different metal films and is recyclable, which avoids the laborious and complicated fabricating procedures.
| S-EPMC3898998 | biostudies-literature
Project description:The aim of the present work was to evaluate the responses of rat muscle-derived stem cells (rMDSCs) to growth on silica nanostructured substrates (SN) with nanoscale topographic surfaces. SN of different sizes (SN-60, SN-150, SN-300, SN-500, and SN-700) were prepared using silica nanoparticles with sizes of 60-700 nm. The prepared SN showed roughness at the nanoscale level. The total number of adherent cells on SN increased with increasing nanoscale level and incubation time. The rMDSCs attached to SN-500 and SN-700 were extensively flattened, whereas those grown on SN-60, SN-150, and SN-300 were more rounded. The rank order of the cell length and height of attached rMDSCs at 5 d on different surfaces was SN-60 ≈ SN-150 >> SN-300 > SN-500 > SN-700 > glass. Compared with rMDSCs grown on SN-60, SN-150, or SN-300, those attached to SN-500 and SN-700 exhibited a distinct morphology with filopodial extensions and stronger expression of focal adhesion, integrin, and actin. An evaluation of the gene expression of adhered rMDSCs showed that rMDSCs grown on SN-300 exhibited a higher environmental stress response than those grown on glass or SN-700. Collectively, our data provide fundamental insight into the cellular response and gene expression of rMDSCs grown on nanostructured substrates.
| S-EPMC7558836 | biostudies-literature
Project description:Cellular microarrays have become extremely useful in expediting the investigation of large libraries of (bio)materials for both in vitro and in vivo biomedical applications. An exceedingly simple strategy is developed for the fabrication of non-cell-adhesive substrates supporting the immobilization of diverse (bio)material features, including both monomeric and polymeric adhesion molecules (e.g., RGD and polylysine), hydrogels, and polymers.
| S-EPMC4447497 | biostudies-literature
Project description:Here, we present and implement a new approach for producing modular inkjet-printable surface-enhanced Raman scattering (SERS) chemosensors. These sensors, combined with a rapid large field-of-view imaging system allow for fast imaging of the chemical characteristics of a sample. The performance of these materials is illustrated by printing a pH sensor on paper and interrogating aqueous solutions at different pH values. Results show single-shot images exceeding 9 mm2 which are readily read out via SERS imaging.
| S-EPMC9801379 | biostudies-literature
Project description:Mass spectrometric techniques can provide data on the composition of a studied sample, utilizing both targeted and untargeted approaches to solve various research problems. Analysis of compounds in the low mass range has practical implications in many areas of research and industry. Laser desorption ionization techniques are utilized for the analysis of molecules in a low mass region using low sample volume, providing high sensitivity with low chemical background. The fabrication of substrates based on nanostructures to assist ionization with well-controlled morphology may improve LDI-MS efficiency for silver nanoparticles with plasmonic properties. In this work, we report an approach for the preparation of silver nanostructured substrates applied as laser desorption ionization (LDI) plates, using the chemical vapor deposition (CVD) technique. Depending on the mass of used CVD precursor, the approach allowed the synthesis of LDI plates with tunable sensitivity for various low molecular weight compounds in both ion-positive and ion-negative modes. Reduced chemical background and sensitivity to small biomolecules of various classes (fatty acids, amino acids and water-soluble metabolites) at nanomolar and picomolar detection levels for lipids such as triacylglycerols, phosphatidylethanolamines and lyso-phosphatidylcholines represent an emerging perspective for applications of LDI-MS plates for the collection of molecular profiles and targeted analysis of low molecular weight compounds for various purposes.
| S-EPMC9267646 | biostudies-literature
Project description:Nanostructured noble metal surfaces enhance the photoluminescence emitted by fluorescent molecules, permitting the development of highly sensitive fluorescence immunoassays. To this end, surfaces with silicon nanowires decorated with silver nanoparticles in the form of dendrites or aggregates were evaluated as substrates for the immunochemical detection of two ovarian cancer indicators, carbohydrate antigen 125 (CA125) and human epididymis protein 4 (HE4). The substrates were prepared by metal-enhanced chemical etching of silicon wafers to create, in one step, silicon nanowires and silver nanoparticles on top of them. For both analytes, non-competitive immunoassays were developed using pairs of highly specific monoclonal antibodies, one for analyte capture on the substrate and the other for detection. In order to facilitate the identification of the immunocomplexes through a reaction with streptavidin labeled with Rhodamine Red-X, the detection antibodies were biotinylated. An in-house-developed optical set-up was used for photoluminescence signal measurements after assay completion. The detection limits achieved were 2.5 U/mL and 3.12 pM for CA125 and HE4, respectively, with linear dynamic ranges extending up to 500 U/mL for CA125 and up to 500 pM for HE4, covering the concentration ranges of both healthy and ovarian cancer patients. Thus, the proposed method could be implemented for the early diagnosis and/or prognosis and monitoring of ovarian cancer.
| S-EPMC10745687 | biostudies-literature