Force magnitude as a variable in maxillary buccal segment intrusion in adult patients with skeletal open bite.
Ontology highlight
ABSTRACT: Objectives
To compare the effects of two different force magnitudes on maxillary posterior segment intrusion using mini-screws. The null hypothesis was that there would be no difference between the two force magnitudes.Materials and methods
Adult patients with skeletal open bite and a dental open bite ranging from 3 to 8 mm were recruited for this trial. The comparator group had 200 g of intrusive force applied for posterior segment intrusion, whereas 400 g of force was applied in the intervention group. Primary outcomes were the amount of posterior teeth intrusion and anterior open bite closure.Results
Twenty-two subjects were randomized to include 11 participants in each group. One participant dropped out in each group, leaving us with 10 subjects to be analyzed per group. There was statistically significant posterior teeth intrusion of 2.42 ± 2.06 and 2.26 ± 1.87 mm for the comparator and intervention groups, respectively, with no difference between them. Statistically significant open bite closure was achieved in both groups, measuring 2.24 ± 1.18 and 3.15 ± 1.06 mm in the comparator and intervention groups, respectively, with no difference between them.Conclusions
Both the 200 g and 400 g intrusive forces yielded similar outcomes in terms of posterior teeth intrusion and anterior open bite closure.
SUBMITTER: Akl HE
PROVIDER: S-EPMC8028465 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:ObjectivesTo compare the root resorption resulting from miniscrew-supported maxillary posterior dentoalveolar intrusion using two different force magnitudes.Materials andMethods: Adult patients with skeletal open bite, indicated for maxillary posterior dentoalveolar intrusion, were recruited and randomly assigned to the comparison or intervention groups. The comparison group involved applying 200 g of intrusive force per segment, which measured 20 g per root, while this force was 400 g per segment in the intervention group, measuring 40 g per root.ResultsTwenty participants were included in the final analysis after 2 patients dropped out, 1 in each group, to end up with 10 subjects (200 roots) per group. There was statistically significant root resorption of 0.84 ± 0.96 mm and 0.93 ± 1.00 mm in the comparison and the intervention groups, respectively. However, there was no statistically significant difference between the groups.ConclusionsRoot resorption inevitably took place in association with orthodontic intrusion. However, increasing the magnitude of the intrusive force did not increase the amount of root resorption, either statistically or clinically.
| S-EPMC8549556 | biostudies-literature
Project description:ObjectivesThe aim of this systematic review and meta-analysis is to assess the degree of stability of anterior open bite (AOB) treatment performed through the molar intrusion supported with skeletal anchorage at least 1 year posttreatment.MethodsThis study was registered in PROSPERO (CRD42016037513). A literature search was conducted to identify randomized (RCT) or non-randomized clinical trials based including those considering before and after design. Data sources were electronic databases including PubMed, Cochrane Library, Science Direct, Google Scholar, Scopus, Lilacs, OpenGrey, Web of Science, and ClinicalTrials.gov . The quality of evidence was assessed through the JBI tool and certainty of evidence was evaluated through the GRADE tool. Random effects meta-analysis was conducted when appropriate.ResultsSix hundred twenty-four articles met the initial inclusion criteria. From these, only 6 remained. The mean posttreatment follow-up time was 2.5 years (SD = 1.04). The overbite showed a standardized mean relapse of - 1.23 mm (95% CI - 1.64, - 0.81, p < 0.0001). Maxillary and mandibular incisors presented a non-significant mean relapse, U1-PP - 0.04 mm (95% CI - 0.55, 0.48) and L1-MP - 0.10 mm (95% CI - 0.57, 0.37). Molar intrusion showed a relapse rate around 12% for the maxillary molars and a 27.2% for mandibular molars.ConclusionThe stability of AOB through molar intrusion using TADs can be considered relatively similar to that reported to surgical approaches, since 10 to 30% of relapse occurs both in maxillary and mandibular molars. The level of certainty ranged between very low and low. RCTs reporting dropout during the follow-up are in dire need.
| S-EPMC7474024 | biostudies-literature
Project description:Introduction Maximum bite force (MBF) is the maximum force performed by the subject on the fragmentation of food, directly related with the mastication and determined by many factors. Objective Analyze the MBF of subjects according to age groups. Methods One hundred individuals from the city of São Paulo were equally divided according to age groups and gender. Each individual submitted to a myotherapy evaluation composed of anthropometric measurements of height and weight to obtain body mass index (BMI), using a tape and a digital scale (Magna, G-life, São Paulo), and a dental condition and maximum bite force evaluation, using a digital dynamometer model DDK/M (Kratos, São Paulo, Brazil), on Newton scale. The dental and bite force evaluations were monitored by a professional from the area. Analysis of variance was used with MBF as a dependent variable, age group and gender as random factors, and BMI as a control variable. Results Till the end of adolescence, it was possible to observe a decrease in MBF in both sexes, with the male force greater than the female force. In young adults, the female force became greater the males, then decreased in adulthood. There was no correlation between MBF and BMI. Conclusion There are MBF variations that characterizes the human development stages, according to age groups.
| S-EPMC4297017 | biostudies-other
Project description:We provide the first predictions of bite force (BS) in a wide sample of living and fossil mammalian predators. To compare between taxa, we calculated an estimated bite force quotient (BFQ) as the residual of BS regressed on body mass. Estimated BS adjusted for body mass was higher for marsupials than placentals and the Tasmanian devil (Sarcophilus harrisii) had the highest relative BS among extant taxa. The highest overall BS was in two extinct marsupial lions. BFQ in hyaenas were similar to those of related, non-osteophagous taxa challenging the common assumption that osteophagy necessitates extreme jaw muscle forces. High BFQ in living carnivores was associated with greater maximal prey size and hypercarnivory. For fossil taxa anatomically similar to living relatives, BFQ can be directly compared, and high values in the dire wolf (Canis dirus) and thylacine (Thylacinus cynocephalus) suggest that they took relatively large prey. Direct inference may not be appropriate where morphologies depart widely from biomechanical models evident in living predators and must be considered together with evidence from other morphological indicators. Relatively low BFQ values in two extinct carnivores with morphologies not represented among extant species, the sabrecat, Smilodon fatalis, and marsupial sabretooth, Thylacosmilus atrox, support arguments that their killing techniques also differed from extant species and are consistent with 'canine-shear bite' and 'stabbing' models, respectively. Extremely high BFQ in the marsupial lion, Thylacoleo carnifex, indicates that it filled a large-prey hunting niche.
| S-EPMC1564077 | biostudies-literature
Project description:Objective:The primary objective of this study was to quantitatively analyze the bone parameters (thickness and density) at four different interdental areas from the distal region of the canine to the mesial region of the second molar in the maxilla and the mandible. The secondary aim was to compare and contrast the bone parameters at these specific locations in terms of sex, growth status, and facial type. Methods:This retrospective cone-beam computed tomography (CBCT) study reviewed 290 CBCT images of patients seeking orthodontic treatment. Cortical bone thickness in millimeters (mm) and density in pixel intensity value were measured for the regions (1) between the canine and first premolar, (2) between the first and second premolars, (3) between the second premolar and first molar, and (4) between the first and second molars. At each location, the bone thickness and density were measured at distances of 2, 6, and 10 mm from the alveolar crest. Results:The sex comparison (male vs. female) in cortical bone thickness showed no significant difference (p > 0.001). The bone density in growing subjects was significantly (p < 0.001) lower than that in non-growing subjects for most locations. There was no significant difference (p > 0.001) in bone parameters in relation to facial pattern in the maxilla and mandible for most sites. Conclusions:There was no significant sex-related difference in cortical bone thickness. The buccal cortical bone density was higher in females than in males. Bone parameters were similar for subjects with hyperdivergent, hypodivergent, and normodivergent facial patterns.
| S-EPMC7093665 | biostudies-literature
Project description:We measured the amount of bite force generated by patients treated for parasymphyseal fractures of the mandible by open reduction and internal fixation at various predetermined time intervals. Sixty volunteers ranging from 18 to 60 years old were selected as the control group. All measurements were made on a bite force measurement device with the head in an upright position and in an unsupported natural position. Bite forces were measured at the incisor and right and left molar regions. These bite forces were compared with six patients with isolated mandibular unilateral parasymphyseal fractures. All patients were operated using open reduction and internal fixation using two miniplates at the fracture site. In the volunteer group, bite forces ranged from 22 to 50 kg in the molar region and 3 to 27 kg in the incisor region. Mean adult healthy values (male and female) in the molar region were 36 kg and in the incisor region, 15 kg. In mandibular parasymphyseal fractures, incisor bite forces were reduced significantly when compared with the control group in the first 2 postoperative weeks and regained significantly thereafter till 4 to 6 weeks. Bite forces in the molar region took ~6 to 12 weeks to regain maximum bite forces when compared with the volunteer group. Restoration of functional bite forces was evident by 6 to 8 weeks. However, the restoration of maximum bite forces may require up to 12 weeks in parasymphyseal fractures.
| S-EPMC3314259 | biostudies-other
Project description:Adaptation is the fundamental driver of functional and biomechanical evolution. Accordingly, the states of biomechanical traits (absolute or relative trait values) have long been used as proxies for adaptations in response to direct selection. However, ignoring evolutionary history, in particular ancestry, passage of time and the rate of evolution, can be misleading. Here, we apply a recently developed phylogenetic statistical approach using significant rate shifts to detect instances of exceptional rates of adaptive changes in bite force in a large group of terrestrial vertebrates, the amniotes. Our results show that bite force in amniotes evolved through multiple bursts of exceptional rates of adaptive changes, whereby whole groups-including Darwin's finches, maniraptoran dinosaurs (group of non-avian dinosaurs including birds), anthropoids and hominins (fossil and modern humans)-experienced significant rate increases compared to the background rate. However, in most parts of the amniote tree of life, we find no exceptional rate increases, indicating that coevolution with body size was primarily responsible for the patterns observed in bite force. Our approach represents a template for future studies in functional morphology and biomechanics, where exceptional rates of adaptive changes can be quantified and potentially linked to specific ecological factors underpinning major evolutionary radiations.
| S-EPMC6367170 | biostudies-literature
Project description:Purussaurus brasiliensis thrived in the northwestern portion of South America during the Late Miocene. Although substantial material has been recovered since its early discovery, this fossil crocodilian can still be considered as very poorly understood. In the present work, we used regression equations based on modern crocodilians to present novel details about the morphometry, bite-force and paleobiology of this species. According to our results, an adult Purussaurus brasiliensis was estimated to reach around 12.5 m in length, weighing around 8.4 metric tons, with a mean daily food intake of 40.6 kg. It was capable of generating sustained bite forces of 69,000 N (around 7 metric tons-force). The extreme size and strength reached by this animal seems to have allowed it to include a wide range of prey in its diet, making it a top predator in its ecosystem. As an adult, it would have preyed upon large to very large vertebrates, and, being unmatched by any other carnivore, it avoided competition. The evolution of a large body size granted P. brasiliensis many advantages, but it may also have led to its vulnerability. The constantly changing environment on a large geological scale may have reduced its long-term survival, favoring smaller species more resilient to ecological shifts.
| S-EPMC4331287 | biostudies-literature
Project description:BackgroundMany animals display morphological and behavioural adaptations to the habitats in which they live and the resources they exploit. Bite force is an important whole-organism performance trait that allows an increase in dietary breadth, the inclusion of novel prey in the diet, territory and predatory defence, and is important during mating in many lizards.MethodsHere, we study six species of southern African agamid lizards from three habitat types (ground-dwelling, rock-dwelling, and arboreal) to investigate whether habitat use constrains head morphology and bite performance. We further tested whether bite force and head morphology evolve as adaptations to diet by analysing a subset of these species for which diet data were available.ResultsOverall, both jaw length and its out-lever are excellent predictors of bite performance across all six species. Rock-dwelling species have a flatter head relative to their size than other species, possibly as an adaptation for crevice use. However, even when correcting for jaw length and jaw out-lever length, rock-dwelling species bite harder than ground-dwelling species. Diet analyses demonstrate that body and head size are not directly related to diet, although greater in-levers for jaw closing (positively related to bite force) are associated to an increase of hard prey in the diet. Ground-dwelling species consume more ants than other species.ConclusionsOur results illustrate the role of head morphology in driving bite force and demonstrate how habitat use impacts head morphology but not bite force in these agamids. Although diet is associated with variation in head morphology it is only partially responsible for the observed differences in morphology and performance.
| S-EPMC8215774 | biostudies-literature
Project description:OBJECTIVE:To compare the root and alveolar bone changes in first premolars adjacent to the orthodontic traction of buccal versus palatal maxillary impacted canines (MIC). MATERIALS AND METHODS:Before and after traction, cone beam tomographic computed (CBCTs) of 25 subjects with unilateral/bilateral MIC were included in this follow-up and retrospective study. Thirty-six first premolars were divided into 2 groups, buccal (n = 15) or palatal (n = 21) MIC, and the tomographic images were evaluated before and after orthodontic traction. Root changes in length and area were measured in sagittal, coronal and axial sections. Dimensions of alveolar bone were evaluated in coronal sections. Intergroup and intragroup comparisons were performed using t or Mann-Whitney U tests. Multiple linear regressions analyses were used to evaluate the influence of all predictor variables on root and alveolar bone changes (P<0.05). RESULTS:Root and alveolar bone changes produced by orthodontic traction were not significant between groups. Root changes were smaller than 1 mm (length) and 2.51 mm2 (area). Alveolar bone changes between buccal and palatal MIC groups ranged from 0.13 mm to 1.69 mm Furthermore, the multivariate analysis showed no significant influence of the impaction condition (buccal or palatal) on root change. Nevertheless, some different predictor variables of the MIC influence these changes. In the alveolar bone, the maximum upper alveolar width (MUAW) is the most affected by the traction of the MIC. CONCLUSIONS:Orthodontic traction of buccal vs palatal MIC produces similar resorptive and appositional root and alveolar bone changes in the adjacent first premolars, without clinical relevance.
| S-EPMC6903742 | biostudies-literature