Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Relationship between the Morphology and Elasticity of Natural Rubber Foam Based on the Concentration of the Chemical Blowing Agent.

ABSTRACT: Concentrated natural latex was used to produce a rubber foam that is porous, elastic and well ventilated. The mechanical properties can be either soft or firm, depending on the formulation of the latex used. Briefly, concentrated natural latex was mixed with chemical agents to make the rubber foam on a laboratory scale using the Dunlop process. In this work, we changed the concentration of the chemical blowing agent in the latex. The morphological properties of the rubber foam were characterised using scanning electron microscopy, and the mechanical properties, or elasticity, were studied using compression experiments and the Mooney-Rivlin calculation. The results show that the concentration of the chemical blowing agent affects the morphological properties of the rubber foam but not the mechanical properties, indicating the heterogeneous structure of the rubber foam. The thermodynamic parameters (∆G and ∆S) and the internal energy force per compression force (F_u/F) of the rubber foam with various amounts of chemical blowing agent were also investigated. This study could be applied in the foam industry, particularly for pillow, mattress and insulation materials, as the present work shows the possible novel control of the morphological structure of the rubber foam without changing its mechanical properties. The difference in cell sizes could affect the airflow in rubber foam.

SUBMITTER: Suethao S

PROVIDER: S-EPMC8036522 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Significantly Tunable Foaming Behavior of Blowing Agent for the Polyethylene Foam Resin with a Unique Designed Blowing Agent System.

Project description:The chemical blowing agent plays a crucial role in enhancing the performance of the polyethylene (PE) foaming resin during the rotational foaming process. Previously, the conventional blowing agent of the PE resin commonly used pure azodicarbonamide (AZ). It had the unavoidable drawbacks of releasing NH3 and exhibiting strong reactions during the rotational foaming process. Meantime, pure AZ had a relatively high decomposition temperature, resulting in a sharp foaming process. To address the above issues, this work developed a uniquely designed blowing agent system. In this study, a novel blowing agent for the PE resin was successfully synthesized by a one-pot method. This blowing agent consisted of an activator and AZ, which exhibited a lower decomposition temperature and a milder decomposition rate than AZ. The activator was constituted of small-sized ammonium dihydrogen phosphate on the AZ surface, which could be decomposed properly and deliver phosphoric acid and H2O during the foaming process. Then, AZ reacted with H2O under phosphoric acid catalysis. Also, this reaction generated CO2 emission while reducing the emission of NH3 through recombination with phosphoric acid. Moreover, phosphoric acid catalysis caused a decrease in the AZ decomposition temperature. Meantime, the thermal coupling appeared during the foaming process, which could further reduce the decomposition rate. Consequently, the small activator played a key role in regulating cell formation and diffusion. Compared to AZ, the novel blowing agent system significantly reduced the cell diameter of the PE foam resin and enhanced its flexural modulus by 50%. Furthermore, the novel blowing agent facilitated better demolding performance and improved the surface morphology of the PE foam product. This research provides significant foaming behavior regulation for the PE resin during industrial applications.

| S-EPMC10851368 | biostudies-literature

Ultrasonic-assisted Dunlop method for natural rubber latex foam production: Effects of irradiation time on morphology and physico-mechanical properties of the foam.

Project description:An ultrasonic-assisted technique was first introduced for the production of natural rubber latex foam (NRLF). The flexible elastomeric foam was formed by a liquid-solid state transformation in an aqueous media. The aim of the current research was to provide a novel strategy for fabricating NRLF using ultrasonication and the Dunlop method, as well as to simultaneously utilize irradiation events to achieve the desired foam properties. NRLFs were exposed to ultrasonication at 25 kHz at the beginning of the gelling process. The effects of irradiation times of 0, 1, 3, 5 and 7 min on the morphology, foaming behaviors, physical properties and mechanical performance of NRLFs were investigated. The results revealed that using ultrasonic irradiation, unfoamed regions and a bimodal structure, which seem to be microstructural defects in conventional NRLF, could be completely eliminated. However, excessive irradiation times of 5 min and longer appeared to affect the physico-mechanical properties of the foams in terms of transient cavitation and the unfavorable physicochemical effects of ultrasonic vibrations. As a result, the optimal ultrasonic irradiation time was found to be 3 min. Using this irradiation duration, a foam with the suitable microcellular structure achieved the most desirable properties, such as its expansion ratio (7-fold increase), foam porosity (85.7%), compression recoverability (98.7%), and tensile strength (307.3 kPa). Moreover, the foam still maintained its characteristic soft nature (hardness less than 100 N) with an indentation hardness of 71.9 N. Therefore, ultrasonic treatment introduced to the conventional Dunlop method is a potentially feasible technique since it improves the morphology and the physico-mechanical properties of NRLFs.

| S-EPMC8683756 | biostudies-literature

Deformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent.

Project description:Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH₂) powder were fabricated by a friction stir welding (FSW) route precursor foaming method. The combinations of 1.0-0 mass %, 0.4-0 mass %, and 0.2-0 mass % TiH₂ were selected as the amounts of TiH₂ relative to the mass of the volume stirred by FSW. The static compression tests of the fabricated FG aluminum foams were carried out. The deformation and fracture of FG aluminum foams fundamentally started in the high-porosity (with TiH₂ addition) layer and shifted to the low-porosity (without TiH₂ addition) layer. The first and second plateau regions in the relationship between compressive stress and strain independently appeared with the occurrence of deformations and fractures in the high- and low-porosity layers. It was shown that FG aluminum foams, whose plateau region varies in steps by the combination of amounts of added TiH₂ (i.e., the combination of pore structures), can be fabricated.

| S-EPMC5455388 | biostudies-other

Tensile Properties and Fracture Behavior of Aluminum Alloy Foam Fabricated from Die Castings without Using Blowing Agent by Friction Stir Processing Route.

Project description:Al foam has been used in a wide range of applications owing to its light weight, high energy absorption and high sound insulation. One of the promising processes for fabricating Al foam involves the use of a foamable precursor. In this study, ADC12 Al foams with porosities of 67%-78% were fabricated from Al alloy die castings without using a blowing agent by the friction stir processing route. The pore structure and tensile properties of the ADC12 foams were investigated and compared with those of commercially available ALPORAS. From X-ray computed tomography (X-ray CT) observations of the pore structure of ADC12 foams, it was found that they have smaller pores with a narrower distribution than those in ALPORAS. Tensile tests on the ADC12 foams indicated that as their porosity increased, the tensile strength and tensile strain decreased, with strong relation between the porosity, tensile strength, and tensile strain. ADC12 foams exhibited brittle fracture, whereas ALPORAS exhibited ductile fracture, which is due to the nature of the Al alloy used as the base material of the foams. By image-based finite element (FE) analysis using X-ray CT images corresponding to the tensile tests on ADC12 foams, it was shown that the fracture path of ADC12 foams observed in tensile tests and the regions of high stress obtained from FE analysis correspond to each other. Therefore, it is considered that the fracture behavior of ADC12 foams in relation to their pore structure distribution can be investigated by image-based FE analysis.

| S-EPMC5453280 | biostudies-other

Design Strategy for Vulcanization Accelerator of Diphenylguanidine/Cyclodextrin Inclusion Complex for Natural Rubber Latex Foam with Enhancing Performance

Project description:Vulcanization is an essential process to obtain high-performance rubber products. Diphenylguanidine (DPG) is often used as the secondary accelerator in the vulcanization process of natural rubber (NR) latex. However, DPG would make NR latex emulsion exhibit gelation, resulting in the negative vulcanization efficiency. In addition, exposure to DPG might lead to some physiological diseases during the production process of DPG doped NR latex. Hydroxypropyl-β-cyclodextrin (HP-β-CD) with the hydrophobic interior and hydrophilic exterior has the advantages of good water solubility, high bioavailability, reliable stability, and low toxicity. In this study, the inclusion complex of diphenylguanidine-hydroxypropyl-β-cyclodextrin (DPG-HP-β-CD) is prepared by ball milling with a host-guest molar ratio of 1 : 1, which has also been applied to the foaming process of NR latex. The mechanical properties of DPG-HP-β-CD inclusion complex/natural rubber latex foam (DPG-HP-β-CD/NRLF) have been significantly improved, including the tensile strength, elongation at break, hardness, compression set, resilience, and antiaging performance. Further, the usage of DPG has been reduced, leading to the reduction of toxicity and environmental hazards.

| S-EPMC9470207 | biostudies-literature

Facile, scalable, and adaptive infrared reflection towards soft systems by blowing a Janus rubber film.

Project description:Controllable IR-reflection systems can be applied to displays, adaptive military camouflages, thermal managements, and many other fields. However, current reported controllable IR-reflection systems suffer from utilizing rigid materials, complicated devices, or high working temperature/voltage, which are not suitable for their widespread applications toward soft systems. Herein, inspired by cephalopods, we demonstrate a facile and scalable method for adaptive IR reflection based on a Janus rubber film, which is composed of aluminum-coated microsheets (AMSs)/rubber composite top and a rubber only bottom. Expansion of the Janus rubber film causes random arrangement of AMSs to stay planar, resulting in the change from IR scattering to concentrated IR reflection. By fixing the Janus rubber films upon the arranged tubes, as-prepared arrays could display complex and changeable patterns by selectively pumping tubes. Being facile and of general validity, our strategies broaden the scope of future controllable IR reflecting applications for environmental IR camouflages and displays.

| S-EPMC8169794 | biostudies-literature

Improvement of Heat Resistance of Fluorosilicone Rubber Employing Vinyl-Functionalized POSS as a Chemical Crosslinking Agent.

Project description:Fluorosilicone rubber (F-LSR) is a promising material that can be applied in various cutting-edge industries. However, the slightly lower thermal resistance of F-LSR compared with that of conventional PDMS is difficult to overcome by applying nonreactive conventional fillers that readily agglomerate owing to their incompatible structure. Polyhedral oligomeric silsesquioxane with vinyl groups (POSS-V) is a suitable material that may satisfy this requirement. Herein, F-LSR-POSS was prepared using POSS-V as a chemical crosslinking agent chemically bonded with F-LSR through hydrosilylation. All F-LSR-POSSs were successfully prepared and most of the POSS-Vs were uniformly dispersed in the F-LSR-POSSs, as confirmed by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) measurements. The mechanical strength and crosslinking density of the F-LSR-POSSs were determined using a universal testing machine (UTM) and dynamic mechanical analysis (DMA), respectively. Finally, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) measurements confirmed that the low-temperature thermal properties were maintained, and the heat resistance was significantly improved compared with conventional F-LSR. Eventually, the poor heat resistance of the F-LSR was overcome with three-dimensional high-density crosslinking by introducing POSS-V as a chemical crosslinking agent, thereby expanding the potential fluorosilicone applications.

| S-EPMC10007170 | biostudies-literature

Multifunctional Cellulosic Natural Rubber and Silver Nanoparticle Films with Superior Chemical Resistance and Antibacterial Properties.

Project description:Composite films of natural rubber/cellulose fiber/silver nanoparticle were synthesized in a green route via the latex solution process. Hybrid cellulose filler containing carboxymethyl cellulose and cellulose microfibers was used to facilitate facile and fast preparation and to improve mechanical strength to the composites, respectively. All the composites possessed a high tensile strength of ~120 MPa, a high heat resistance of nearly 300 °C, and more than 20% biodegradability in soil in two weeks. Chemical resistance and antibacterial activity of the composite was enhanced depending on sizes and concentrations of silver nanoparticles (AgNPs). The composites containing 0.033-0.1% w/w AgNPs retarded toluene uptake to less than 12% throughout 8 h, whereas the composite containing 0.067-0.1% w/w AgNPs exhibited excellent antibacterial activities against Escherichia coli and Staphylococcus aureus. In comparison, 50 nm-AgNPs presented higher antibacterial activities than 100 nm-AgNPs. In vitro cytotoxicity test assessed after incubation for 24 h and 48 h revealed that almost all AgNPs-composite films exhibited non/weak and moderate cytotoxicity, respectively, to HaCaT keratinocyte cells.

| S-EPMC9921950 | biostudies-literature

Investigating the Impact of Curing System on Structure-Property Relationship of Natural Rubber Modified with Brewery By-Product and Ground Tire Rubber.

Project description:The application of wastes as a filler/reinforcement phase in polymers is a new strategy to modify the performance properties and reduce the price of biocomposites. The use of these fillers, coming from agricultural waste (cellulose/lignocellulose-based fillers) and waste rubbers, constitutes a method for the management of post-consumer waste. In this paper, highly-filled biocomposites based on natural rubber (NR) and ground tire rubber (GTR)/brewers' spent grain (BSG) hybrid reinforcements, were prepared using two different curing systems: (i) sulfur-based and (ii) dicumyl peroxide (DCP). The influence of the amount of fillers (in 100/0, 50/50, and 0/100 ratios in parts per hundred of rubber) and type of curing system on the final properties of biocomposites was evaluated by the oscillating disc rheometer, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, swelling behavior, tensile testing, and impedance tube measurements. The results show, that the scorch time and the optimum curing time values of sulfur cured biocomposites are affected by the change of the hybrid filler ratio while using the DCP curing system, and the obtained values do not show significant variations. The results conclude that the biocomposites cured with sulfur have better physico-mechanical and acoustic absorption, and that the type of curing system does not influence their thermal stability. The overall analysis indicates that the difference in final properties of highly filled biocomposites cured with two different systems is mainly affected by the: (i) cross-linking efficiency, (ii) partial absorption and reactions between fillers and used additives, and (iii) affinity of additives to applied fillers.

| S-EPMC7182860 | biostudies-literature

Chemical Scissors Tailored Nano-Tellurium with High-Entropy Morphology for Efficient Foam-Hydrogel-Based Solar Photothermal Evaporators

Project description: Not available

| S-EPMC10709277 | biostudies-literature