Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Terpyridine-Fe²⁺-Based Coordination Polymer Film for On-Chip Micro-Supercapacitor with AC Line-Filtering Performance.

ABSTRACT: The preparation of redox-active, ultrathin polymer films as the electrode materials represents a major challenge for miniaturized flexible electronics. Herein, we demonstrated a liquid-liquid interfacial polymerization approach to a coordination polymer films with ultrathin thickness from tri(terpyridine)-based building block and iron atoms. The as-synthesized polymer films exhibit flexible properties, good redox-active and narrow bandgap. After directly transferred to silicon wafers, the on-chip micro-supercapacitors of TpPB-Fe-MSC achieved the high specific capacitances of 1.25 mF cm^-2 at 50 mV s^-1 and volumetric energy density of 5.8 mWh cm^-3, which are superior to most of semiconductive polymer-based micro-supercapacitor (MSC) devices. In addition, as-fabricated on-chip MSCs exhibit typical alternating current (AC) line-filtering performance (-71.3° at 120 Hz) and a short resistance-capacitance (RC) time (0.06 ms) with the electrolytes of PVA/LiCl. This study provides a simple interfacial approach to redox-active polymer films for microsized energy storage devices.

SUBMITTER: Wang H

PROVIDER: S-EPMC8037160 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Micro-supercapacitors based on oriented coordination polymer thin films for AC line-filtering.

Project description:Reported herein is a facile solution-processed substrate-independent approach for preparation of oriented coordination polymer (Co-BTA) thin-film electrodes for on-chip micro-supercapacitors (MSCs). The Co-BTA-MSCs exhibited excellent AC line-filtering performance with an extremely short resistance-capacitance constant, making it capable of replacing aluminum electrolytic capacitors for AC line-filtering applications.

| S-EPMC9085491 | biostudies-literature

Study of an AC dielectric barrier single micro-discharge filament over a water film.

Project description:In the last decades, AC powered atmospheric dielectric barrier discharges (DBDs) in air with a liquid electrode have been proposed as a promising plasma technology with versatile applicability in medicine, agriculture and water treatment. The fundamental features of the micro-discharge filaments that make up this type of plasma have, however, not been studied yet in sufficient detail. In order to address this need, we investigated a single DBD micro-discharge filament over a water film in a sphere-to-sphere electrode configuration, by means of ICCD imaging and optical emission spectroscopy. When the water film temporarily acts as the cathode, the plasma duration is remarkably long and shows a clear similarity with a resistive barrier discharge, which we attribute to the resistive nature of the water film and the formation of a cathode fall. As another striking difference to DBD with solid electrodes, a constant glow-like plasma is observed at the water surface during the entire duration of the applied voltage cycle, indicating continuous plasma treatment of the liquid. We propose several elementary mechanisms that might underlie the observed unique behavior, based on the specific features of a water electrode.

| S-EPMC6053385 | biostudies-literature

Conducting polymer composite film incorporated with aligned carbon nanotubes for transparent, flexible and efficient supercapacitor.

Project description:Polyaniline composite films incorporated with aligned multi-walled carbon nanotubes (MWCNTs) are synthesized through an easy electrodeposition process. These robust and electrically conductive films are found to function as effective electrodes to fabricate transparent and flexible supercapacitors with a maximum specific capacitance of 233 F/g at a current density of 1 A/g. It is 36 times of bare MWCNT sheet, 23 times of pure polyaniline and 3 times of randomly dispersed MWCNT/polyaniline film under the same conditions. The novel supercapacitors also show a high cyclic stability.

| S-EPMC3582998 | biostudies-literature

Sputtered thin film deposited laser induced graphene based novel micro-supercapacitor device for energy storage application.

Project description:Pioneering flexible micro-supercapacitors, designed for exceptional energy and power density, transcend conventional storage limitations. Interdigitated electrodes (IDEs) based on laser-induced graphene (LIG), augmented with metal-oxide modifiers, harness synergies with layered graphene to achieve superior capacitance. This study presents a novel one-step process for sputtered plasma deposition of HfO2, resulting in enhanced supercapacitance performance. Introducing LIG-HfO2 micro-supercapacitor (MSC) devices with varied oxygen flow rates further boosts supercapacitance performance by introducing oxygen functional groups. FESEM investigations demonstrate uniform coating of HfO2 on LIG fibers through sputtering. Specific capacitance measurements reveal 6.4 mF/cm2 at 5 mV/s and 4.5 mF/cm2 at a current density of 0.04 mA/cm2. The LIG-HfO2 devices exhibit outstanding supercapacitor performance, boasting at least a fourfold increase over pristine LIG. Moreover, stability testing indicates a high retention rate of 97% over 5000 cycles, ensuring practical real-time applications.

| S-EPMC11251010 | biostudies-literature

Yttrium(iii) coordination polymer micro/nanospheres with single ligand and dual ligands.

Project description:In this work, yttrium(iii) coordination polymer (Y-CP) ball-flower-shaped microparticles with diameters ranging from 5 μm to 10 μm were synthesized using vanillin and asparagine as ligands under solvothermal conditions at 150 °C for 24 h. Then, we investigated the reaction influencing factors such as the concentration of reactants (involving vanillin, asparagine, and rare earth), reaction temperature, and reaction time. Both uniform and sphere-like nanoparticles with an average size of ∼50 nm were obtained using vanillin as a ligand at 120 °C for 12 h. Furthermore, the products were characterized and the results of cytotoxicity research demonstrated that the nanoparticles had low cytotoxicity and the coordination polymer nanospheres were perfectly biocompatible.

| S-EPMC9056617 | biostudies-literature

Competition in Coordination Assemblies: 1D-Coordination Polymer or 2D-Nets Based on Co(NCS)2 and 4'-(4-methoxyphenyl)-3,2':6',3″-terpyridine.

Project description:The synthesis and characterization of 4'-(4-methoxyphenyl)-3,2':6',3″-terpyridine (2) (IUPAC PIN 24-(4-methoxyphenyl)-12,22:26,32-terpyridine) are described, and its coordination behaviour with cobalt(II) thiocyanate has been investigated. In a series of experiments, crystals were grown at room temperature by layering a MeOH solution of Co(NCS)2 over a CHCl3 solution of 2 using 1:1, 1:2 or 2:1 molar ratios of metal salt-to-ligand. Crystals harvested within 2-3 weeks proved to be the 1D-coordination polymer [Co(2)(NCS)2(MeOH)2]n and powder X-ray diffraction (PXRD) confirmed that the crystals selected for single-crystal X-ray diffraction were representative of the bulk samples. Longer crystallization times with a Co(NCS)2 to 2 molar ratio of 1:1 yielded crystals of [Co(2)(NCS)2(MeOH)2]n (1D-chain) and the pseudopolymorphs [{Co(2)2(NCS)2}·3MeOH]n and [{Co(2)2(NCS)2}·2.2CHCl3]n ((4,4)-nets), each type of crystal originating from a different zone in the crystallization tube. PXRD for this last experiment confirmed that the dominant product in the bulk sample was the 1D-coordination polymer.

| S-EPMC6680941 | biostudies-literature

On-chip integration of bulk micromachined three-dimensional Si/C/CNT@TiC micro-supercapacitors for alternating current line filtering.

Project description:Three-dimensional (3D) micro-supercapacitors (MSCs) with superior performances are desirable for miniaturized electronic devices. 3D interdigitated MSCs fabricated by bulk micromachining technologies have been demonstrated for silicon wafers. However, rational design and fabrication technologies of 3D architectures still need to be optimized within a limited footprint area to improve the electrochemical performances of MSCs. Herein, we report a 3D interdigitated MSC based on Si/C/CNT@TiC electrodes with high capacitive properties attributed to the excellent electronic/ionic conductivity of CNT@TiC core-shells with a high aspect ratio morphology. The symmetric MSC presents a maximum specific capacitance of 7.42 mF cm-2 (3.71 F g-1) at 5 mV s-1, and shows an 8 times areal capacitance increment after material coating at each step, fully exploiting the advantage of 3D interdigits with a high aspect ratio. The all-solid-state MSC delivers a high energy density of 0.45 μW h cm-2 (0.22 W h kg-1) at a power density of 10.03 μW h cm-2, and retains ∼98% capacity after 10 000 cycles. The MSC is further integrated on-chip in a low-pass filtering circuit, exhibiting a stable output voltage with a low ripple coefficient of 1.5%. It is believed that this work holds a great promise for metal-carbide-based 3D interdigitated MSCs for energy storage applications.

| S-EPMC8979127 | biostudies-literature

Structure-Integrated Thin-Film Supercapacitor as a Sensor.

Project description:Today, aircraft composite structures are generally over-dimensioned to avoid catastrophic failure by unseen damages. This leads to a higher system weight and therefore an unwanted increase in greenhouse gas emissions. To reduce this parasitic mass, load monitoring can play an important role in damage detection. Additionally, the weight and volume of future aircraft structures can also be reduced by energy storing and load carrying structures: so-called power composites. In this study a novel method of combining both approaches for maximum weight reduction is shown. This is achieved by using power composites as load monitoring sensors and energy suppliers. Therefore, supercapacitors are integrated into fiber reinforced polymers and are then used to investigate the mechanical load influence. By using four-point bending experiments and in situ electrochemical impedance spectroscopy, a strong relation between the mechanical load and the electrochemical system is found and analyzed using a model. For the first time, it is possible to detect small strain values down to 0.2% with a power composite. This strain is considerably lower than the conventional system load. The developed model and the impedance data indicate the possibility of using the composite as an energy storage as well as a strain sensor.

| S-EPMC9504183 | biostudies-literature

Micro and Nano Smart Composite Films Based on Copper-Iodine Coordination Polymer as Thermochromic Biocompatible Sensors.

Project description:Herein is presented the preparation and characterization of a composite material obtained by the combination of nanosheets of a coordination polymer (CP) based on the copper(I)-I double chain with response to temperature and pressure with polylactic acid (PLA) as biodegradable organic matrix. The new films of composite materials are generated using a simple and low-cost method and can be created with long lateral dimensions and thicknesses ranging from a few microns to a few nanometers. Studies show that the new material maintains the optical response versus the temperature, while the elasticity and flexibility of the PLA totally quenches the response to pressure previously observed for the CP. This new material can act as a reversible sensor at low temperatures, thanks to the flexibility of the copper(I)-iodine chain that conforms the CP. The addition of CP to the PLA matrix reduces the elastic modulus and ultimate elongation of the organic matrix, although it does not reduce its tensile strength.

| S-EPMC6630835 | biostudies-literature

Ultra-high molecular weight linear coordination polymers with terpyridine ligands.

Project description:Ultra-high molecular weight (UHMW, M n > 1000 kDa) polymeric drift control adjuvants (DCAs) for agricultural spraying are prone to mechanical degradation and rapidly lose performance. To overcome this, we have designed linear coordination polymers (LCPs) composed of 400 kDa telechelic bis-terpyridine end-functionalised polyacrylamide units, which 'self-heal' upon shearing through reformation of coordination bonds. After addition of Fe(ii) to dilute aqueous solutions of the terpyridine telechelics, UHMW LCPs were obtained as demonstrated by UV-vis spectroscopy, MALS GPC and intrinsic viscosity measurements. Importantly, these UHMW LCPs were shown to function as effective DCAs, reducing the formation of fine 'driftable' droplets during spray testing at concentrations as low as 100 ppm. Following mechanically-induced coordination bond-scission, the UHMW LCPs were found to recover up to 90% of their performance compared to un-sheared samples, at a rate dependent on the transition metal ion used to form the complex.

| S-EPMC6585884 | biostudies-literature