Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Responsive Emulsions for Sequential Multienzyme Cascades.

ABSTRACT: Multienzyme cascade biocatalysis is an efficient synthetic process, avoiding the isolation/purification of intermediates and shifting the reaction equilibrium to the product side.. However, multienzyme systems are often limited by their incompatibility and cross-reactivity. Herein, we report a multi-responsive emulsion to proceed multienzyme reactions sequentially for high reactivity. The emulsion is achieved using a CO₂ , pH, and thermo-responsive block copolymer as a stabilizer, allowing the on-demand control of emulsion morphology and phase composition. Applying this system to a three-step cascade reaction enables the individual optimal condition for each enzyme, and a high overall conversion (ca. 97 % of the calculated limit) is thereby obtained. Moreover, the multi-responsiveness of the emulsion allows the facile and separate yielding/recycling of products, polymers and active enzymes. Besides, the system could be scaled up with a good yield.

SUBMITTER: Sun Z

PROVIDER: S-EPMC8048562 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Sequential One-Pot Multienzyme Chemoenzymatic Synthesis of Glycosphingolipid Glycans.

Project description:Glycosphingolipids are a diverse family of biologically important glycolipids. In addition to variations on the lipid component, more than 300 glycosphingolipid glycans have been characterized. These glycans are directly involved in various molecular recognition events. Several naturally occurring sialic acid forms have been found in sialic acid-containing glycosphingolipids, namely gangliosides. However, ganglioside glycans containing less common sialic acid forms are currently not available. Herein, highly effective one-pot multienzyme (OPME) systems are used in sequential for high-yield and cost-effective production of glycosphingolipid glycans, including those containing different sialic acid forms such as N-acetylneuraminic acid (Neu5Ac), N-glycolylneuraminic acid (Neu5Gc), 2-keto-3-deoxy-d-glycero-d-galacto-nononic acid (Kdn), and 8-O-methyl-N-acetylneuraminic acid (Neu5Ac8OMe). A library of 64 structurally distinct glycosphingolipid glycans belonging to ganglio-series, lacto-/neolacto-series, and globo-/isoglobo-series glycosphingolipid glycans is constructed. These glycans are essential standards and invaluable probes for bioassays and biomedical studies.

| S-EPMC5775905 | biostudies-literature

Multienzyme One-Pot Cascades Incorporating Methyltransferases for the Strategic Diversification of Tetrahydroisoquinoline Alkaloids.

Project description:The tetrahydroisoquinoline (THIQ) ring system is present in a large variety of structurally diverse natural products exhibiting a wide range of biological activities. Routes to mimic the biosynthetic pathways to such alkaloids, by building cascade reactions in vitro, represents a successful strategy and can offer better stereoselectivities than traditional synthetic methods. S-Adenosylmethionine (SAM)-dependent methyltransferases are crucial in the biosynthesis and diversification of THIQs; however, their application is often limited in vitro by the high cost of SAM and low substrate scope. In this study, we describe the use of methyltransferases in vitro in multi-enzyme cascades, including for the generation of SAM in situ. Up to seven enzymes were used for the regioselective diversification of natural and non-natural THIQs on an enzymatic preparative scale. Regioselectivites of the methyltransferases were dependent on the group at C-1 and presence of fluorine in the THIQs. An interesting dual activity was also discovered for the catechol methyltransferases used, which were found to be able to regioselectively methylate two different catechols in a single molecule.

| S-EPMC8457072 | biostudies-literature

Cage-like microstructures via sequential Ugi reactions in aqueous emulsions

Project description: Not available

| S-EPMC11346303 | biostudies-literature

Sequential two-step multienzyme synthesis of tumor-associated sialyl T-antigens and derivatives.

Project description:A series of α2-3-sialylated β1-3-linked galactosides, including sialyl T-antigens, 3'-sialyl galacto-N-biose, 3'-sialyl lacto-N-biose, and their derivatives containing natural and non-natural sialic acid forms have been synthesized from simple monosaccharides using an efficient sequential two-step multienzyme approach.

| S-EPMC3114947 | biostudies-literature

Responsive Pickering Emulsions Stabilized by Frozen Complex Coacervate Core Micelles.

Project description:Frozen complex coacervate core micelles (C3Ms) were developed as a class of particle stabilizers for Pickering emulsions. The C3Ms are composed of a core of electrostatically interacting weak polyelectrolytes, poly(acrylic acid) (pAA) and poly(dimethylaminopropylacrylamide) (pDMAPAA), surrounded by a corona of water-soluble and surface active poly(N-isopropylacrylamide) (pNiPAM). Mixing parameters of the two polymer solutions, including pH, mixing method, charge ratio, and salinity of the medium, were carefully controlled, leading to monodisperse, colloidally stable C3Ms. A combination of dynamic light scattering and proton nuclear magnetic resonance experiments showed that the C3Ms gradually disassembled from a dynamically frozen core state in pure water into free polyelectrolyte chains above 0.8 M NaCl. Upon formulation of dodecane-in-water emulsions, the frozen C3Ms adsorb as particles at the droplet interfaces in striking contrast with most of the conventional micelles made of amphiphilic block copolymers which fall apart at the interface. Eventually, increasing the salt concentration of the system triggered disassembly of the C3Ms, which led to emulsion destabilization.

| S-EPMC8772379 | biostudies-literature

Oxidation-Responsive Emulsions Stabilized with Poly(Vinyl Pyrrolidone-co-allyl Phenyl Sulfide).

Project description:Oxidation-responsive emulsions were obtained by stabilizing mineral oil droplets using amphiphilic poly(vinyl pyrrolidone-co-allyl phenyl sulfide) (P(VP-APS)). 1H nuclear magnetic resonance (NMR) spectroscopy revealed that P(VP-APS) whose APS content was 0%, 3.28%, 3.43% and 4.58% were successfully prepared by free radical reaction and the sulfide of APS was oxidized by H2O2 treatment. X-ray Photoelectron Spectroscopy (XPS) also disclosed that the sulfide of APS was oxidized to sulfone by the oxidizing agent. The optical density of copolymer solutions and the interfacial activity of the copolymers markedly decreased by H2O2 treatment possibly because the sulfide of APS was oxidized and the amphiphilicity of the copolymers were weakened. The increase rate of the oil droplet diameter of the emulsions was outstandingly promoted when H2O2 solution (10%, v/v) was used as an aqueous phase. The phase separation of the emulsions was also expedited by the oxidizing agent. The oxidation of APS and the weakened interfacial activity were thought to be a main reason for the demulsification of P(VP-APS)-stabilized emulsions.

| S-EPMC7077715 | biostudies-literature

Pickering Emulsions Based on the pH-Responsive Assembly of Food-Grade Chitosan.

Project description:Few natural, biocompatible, and inexpensive emulsifiers are available because such emulsifiers must satisfy severe requirements, be produced synthetically rather than naturally, be nontoxic, and require minimal effort to produce. Therefore, the synthesis of food-grade and biocompatible nanoparticles as an alternative to surfactants has recently received attention in the industry. However, many previous efforts involved chemical modification of materials or the introduction of secondary cocomponents for emulsion formation. To achieve the goal of simple preparation, we consider here chitosan nanoparticles to prepare Pickering emulsions of food-grade oil through the control of pH, without further chemical modification or extra additives. A mild process can prepare nanoparticles from chitosan by simply increasing the pH from 3.0 to 6.0. The results showed that the average radius of chitosan at pH 6.0 was 170 nm, while large aggregates were formed at pH 6.5. These nanoparticles were utilized to prepare the Pickering emulsion. The average size of emulsion droplets decreased upon increasing the pH from 3.0 to 6.0. Moreover, Pickering emulsions at different oil fractions and nanoparticle concentrations were stable and showed a low creaming index for 45 days. The emulsions were stable against coalescence and flocculation and behaved rheologically as gel-like, shear-thinning fluids (G' > G″). Pickering emulsion prevents the growth of the microorganism (Staphylococcus aureus) at different pH values and chitosan concentrations. These results demonstrate that chitosan nanoparticles could be a cost-effective and biocompatible emulsifier for the food or pharmaceutical industry for encapsulation and bioactive compounds, and Pickering emulsions have promising antibacterial effects for further applications.

| S-EPMC8295998 | biostudies-literature

Temperature-responsive Pickering high internal phase emulsions for recyclable efficient interfacial biocatalysis.

Project description:The field of biocatalysis is expanding owing to the increasing demand for efficient low-cost green chemical processes. However, a feasible strategy for achieving product separation, enzyme recovery, and high catalytic efficiency in biocatalysis remains elusive. Herein, we present thermoresponsive Pickering high internal phase emulsions (HIPEs) as controllable scaffolds for efficient biocatalysis; these HIPEs demonstrate a transition between emulsification and demulsification depending on temperature. Ultra-high-surface-area Pickering HIPEs were stabilized by Candida antarctica lipase B immobilized on starch particles modified with butyl glycidyl ether and glycidyl trimethyl ammonium chloride, thus simplifying the separation and reuse processes and significantly improving the catalytic efficiency. In addition, the switching temperature can be precisely tuned by adjusting the degree of substitution of the modified starches to meet the temperature demands of various enzymes. We believe that this system provides a green platform for various interfacial biocatalytic processes of industrial interest.

| S-EPMC9350585 | biostudies-literature

Sodium caseinate as a particulate emulsifier for making indefinitely recycled pH-responsive emulsions.

Project description:pH-responsive emulsions are one of the simplest and most readily implementable stimuli-responsive systems. However, their practical uses have been greatly hindered by cyclability. Here, we report a robust pH-responsive emulsion prepared by utilizing pure sodium caseinate (NaCas) as the sole emulsifier. We demonstrate that the emulsification/demulsification of the obtained NaCas-stabilized emulsion can be triggered by simply changing the pH value over 100 cycles, which has never been observed in any protein-stabilized emulsion system. The NaCas-stabilized emulsion maintains its pH-responsive properties even in a saturated salt solution (NaCl ∼ 6.1 M) or seawater. We illustrate how NaCas functions in pH-responsive emulsions and show that when conventional nanoparticles such as zein protein or bare SiO2 particles were coated with a layer of NaCas, the resulting formulated emulsions could be switched on and off over 10 cycles. The unique properties of NaCas thus enable the engineering of conventional Pickering emulsions to pH-responsive Pickering emulsions. Finally, we have integrated catalytically active gold (Au) nanoclusters (NCs) into the NaCas protein and then utilized them to produce emulsions. Remarkably, these NaCas-Au NCs assembled at the oil-water interface exhibited excellent catalytic activity and cyclability, not only in aqueous solution, but also in complicated seawater environments.

| S-EPMC8152521 | biostudies-literature

Responsive micromolds for sequential patterning of hydrogel microstructures.

Project description:Microscale hydrogels have been shown to be beneficial for various applications such as tissue engineering and drug delivery. A key aspect in these applications is the spatial organization of biological entities or chemical compounds within hydrogel microstructures. For this purpose, sequentially patterned microgels can be used to spatially organize either living materials to mimic biological complexity or multiple chemicals to design functional microparticles for drug delivery. Photolithographic methods are the most common way to pattern microscale hydrogels but are limited to photocrosslinkable polymers. So far, conventional micromolding approaches use static molds to fabricate structures, limiting the resulting shapes that can be generated. Herein, we describe a dynamic micromolding technique to fabricate sequentially patterned hydrogel microstructures by exploiting the thermoresponsiveness of poly(N-isopropylacrylamide)-based micromolds. These responsive micromolds exhibited shape changes under temperature variations, facilitating the sequential molding of microgels at two different temperatures. We fabricated multicompartmental striped, cylindrical, and cubic microgels that encapsulated fluorescent polymer microspheres or different cell types. These responsive micromolds can be used to immobilize living materials or chemicals into sequentially patterned hydrogel microstructures which may potentially be useful for a range of applications at the interface of chemistry, materials science and engineering, and biology.

| S-EPMC3206098 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data