A Straightforward Approach to Create Ag/SWCNT Composites.
Ontology highlight
ABSTRACT:
SUBMITTER: Rdest M
PROVIDER: S-EPMC8070709 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The efficiency of devices for biomedical applications, including tissue engineering and neuronal stimulation, heavily depends on their biocompatibility and performance level. Therefore, it is important to find adequate materials that meet the necessary requirements such as (i) being intrinsically compatible with biological systems, (ii) providing a sufficient electronic conductivity that promotes efficient signal transduction, (iii) having "soft" mechanical properties comparable to biological structures, and (iv) being degradable in physiological solution. We have developed organic conducting biocompatible single-walled carbon nanotubes (SWCNT) composites based on bovine serum albumin, carboxymethylcellulose, and acrylic polymer and investigated their properties, which are relevant for biomedical applications. This includes ζ-potential measurements, conductivity analyses, and SEM micrographs, the latter providing a local analysis of SWCNT distribution in the base material. We observed the development of the electrical conductivity of the SWCNT composites exposed to 1 mM KCl electrolyte for 40 days, representing a high stability of the samples. The conductivity of samples reaches 1300 S/m for 0.45 wt.% nanotubes. Moreover, we demonstrated the biocompatibility of the composites via cultivating fibroblast cell culture. Finally, we showed that composite coating results in the longer lifespan of cells on the surface. Overall, the SWCNT-based conductive composites might be a promising material for extended biomedical applications.
| S-EPMC7763503 | biostudies-literature
Project description:The present article reports the development of soft nanohybrids comprising of single walled carbon nanotube (SWCNT) included silver nanoparticles (AgNPs) having superior antibacterial property. In this regard aqueous dispersing agent of carbon nanotube (CNT) containing a silver ion reducing unit was synthesised by the inclusion of tryptophan and tyrosine within the backbone of the amphiphile. The dispersions were characterized spectroscopically and microscopically using TEM, AFM and Raman spectroscopy. The nanotube-nanoparticle conjugates were prepared by the in situ photoreduction of AgNO3. The phenolate residue and the indole moieties of tyrosine and tryptophan, respectively reduces the sliver ion as well as acts as stabilizing agents for the synthesized AgNPs. The nanohybrids were characterized using TEM and AFM. The antibacterial activity of the nanohybrids was studied against Gram-positive (Bacillus subtilis and Micrococcus luteus) and Gram-negative bacteria (Escherichia coli and Klebsiella aerogenes). The SWCNT dispersions showed moderate killing ability (40-60%) against Gram-positive bacteria however no antibacterial activity was observed against the Gram negative ones. Interestingly, the developed SWCNT-amphiphile-AgNP nanohybrids exhibited significant killing ability (?90%) against all bacteria. Importantly, the cell viability of these newly developed self-assemblies was checked towards chinese hamster ovarian cells and high cell viability was observed after 24 h of incubation. This specific killing of bacterial cells may have been achieved due to the presence of higher -SH containing proteins in the cell walls of the bacteria. The developed nanohybrids were subsequently infused into tissue engineering scaffold agar-gelatin films and the films similarly showed bactericidal activity towards both kinds of bacterial strains while allowing normal growth of eukaryotic cells on the surface of the films.
| S-EPMC4159779 | biostudies-literature
Project description:Polymer/inorganic thermoelectric composites have witnessed rapid progress in recent years, but most of the studies have focused on the traditional conducting polymers. The limited structures of traditional conducting polymers restrain the development of organic thermoelectric composites. Herein, we report the preparation and thermoelectric properties of a series of composites films based on SWCNTs and bipyridine-containing polyfluorene derivatives. The value of the power factor around 12 μW m-1 K-2 was achieved for the composite F8bpy/SWCNTs with a mass ratio of 50/50, and the maximum value of 62.3 μW m-1 K-2 was obtained when the mass ratio reached 10/90. Moreover, taking advantage of the bipyridine unit could chelate various kinds of metal ions to form polymer complexes. The enhanced power factor of 87.3 μW m-1 K-2 was obtained for composite F8bpy-Ni/SWCNTs with a mass ratio of 50/50. Finally, the thermoelectric properties of the bipyridine-containing polyfluorene derivative/SWCNT composites were conveniently tuned by chelating with different metal ions.
| S-EPMC6419042 | biostudies-literature
Project description:Single-walled carbon nanotube (SWCNT)/Bi2Te3 composite powders were fabricated via a one-step in situ reductive method, and their corresponding bulk composites were prepared by a cold-pressing combing pressureless sintering process or a hot-pressing process. The influences of the preparation methods on the thermoelectric properties of the SWCNT/Bi2Te3 bulk composites were investigated. All the bulk composites showed negative Seebeck coefficients, indicating n-type conduction. A maximum power factor of 891.6 ?Wm-1K-2 at 340 K was achieved for the SWCNT/Bi2Te3 bulk composites with 0.5 wt % SWCNTs prepared by a hot-pressing process, which was ~5 times higher than that of the bulk composites (167.7 ?Wm-1K-2 at 300 K) prepared by a cold-pressing combing pressureless sintering process, and ~23 times higher than that of the bulk composites (38.6 ?Wm-1K-2 at 300 K) prepared by a cold-pressing process, mainly due to the enhanced density of the hot-pressed bulk composites.
| S-EPMC7321600 | biostudies-literature
Project description:Patterned structures of flexible, stretchable, electrically conductive materials on soft substrates could lead to novel electronic devices with unique mechanical properties allowing them to bend, fold, stretch or conform to their environment. For the last decade, research on improving the stretchability of circuits on elastomeric substrates has made significant progresses but designing printed circuit assemblies on elastomers remains challenging. Here we present a simple, cost-effective, cleanroom-free process to produce large scale soft electronic hardware where standard surface-mounted electrical components were directly bonded onto all-elastomeric printed circuit boards, or soft PCBs. Ag-PDMS tracks were stencil printed onto a PDMS substrate and soft PCBs were made by bonding the top and bottom layers together and filling punched holes with Ag-PDMS to create vias. Silver epoxy was used to bond commercial electrical components and no mechanical failure was observed after hundreds of stretching cycles. We also demonstrate the fabrication of a stretchable clock generator.
| S-EPMC4248267 | biostudies-literature
Project description:Sustainable and personally tailored materials production is an emerging challenge to society. Living organisms can produce and pattern an extraordinarily wide range of different molecules in a sustainable way. These natural systems offer an abundant source of inspiration for the development of new environmentally friendly materials production techniques. In this paper, we describe the first steps toward the 3-dimensional printing of bacterial cultures for materials production and patterning. This methodology combines the capability of bacteria to form new materials with the reproducibility and tailored approach of 3D printing systems. For this purpose, a commercial 3D printer was modified for bacterial systems, and new alginate-based bioink chemistry was developed. Printing temperature, printhead speed, and bioink extrusion rate were all adapted and customized to maximize bacterial health and spatial resolution of printed structures. Our combination of 3D printing technology with biological systems enables a sustainable approach for the production of numerous new materials.
| S-EPMC5525104 | biostudies-literature
Project description:Antibody-drug conjugates (ADCs) have become a powerful platform to deliver cytotoxic agents selectively to cancer cells. ADCs have traditionally been prepared by stochastic conjugation of a cytotoxic drug using an antibody's native cysteine or lysine residues. Through strategic selection of the mammalian expression host, we were able to introduce azide-functionalized glycans onto a homogeneously glycosylated anti-EphA2 monoclonal antibody in one step. Conjugation with an alkyne-bearing pyrrolobenzodiazepine dimer payload (SG3364) using copper-catalyzed click chemistry yielded a site-specific ADC with a drug-to-antibody ratio (DAR) of four. This ADC was compared with a glycoengineered DAR two site-specific ADC, and both were found to be highly potent against EphA2-positive human prostate cancer cells in both an in vitro cytotoxicity assay and a murine tumor xenograft model.
| S-EPMC5108038 | biostudies-literature
Project description:Incorporation of nanoparticles into polymer resins has recently attracted a significant amount of attention from researchers for the nanoparticles' ability to alter the properties of the resin. Whereas graphene-based structures possess a two-dimensional honeycomb arrangement of carbon atoms that makes them desirable for engineering composite materials, quantum dot formulations have been primarily used in optoelectronic applications that take advantage of quantum confinement and size-tunable properties. Graphene and quantum dots (GQDs) are ubiquitous in the current research literature; however, the impact of GQD on the physical properties of polymer resins like epoxy remains unclear. Here, we show that infusing GQD into an epoxy polymer matrix results in (1) a 2.6-fold increase in the toughness of the polymer resins, (2) a 2.25-fold increase in the tensile strength of the polymer resins compared to its original tensile strength, (3) uniform loading at weight percentages as high as 10% of the polymer resin, (4) an 18% change to the max % increase in tensile strain compared to that of the neat polymer resin without GQDs, even though there is an increase in tensile strength, and (5) a 2.5-times increase in Young's modulus compared to that of the neat polymer resin, all while maintaining excellent optical properties of the composite formulation. Our results demonstrate that GQDs with dual acid and alcohol functional groups can enable high loading percentages, which, in turn, give rise to composite materials that are simultaneously stronger and tougher. We believe that these GQDs, created from an abundant source, are a starting point for new and more sophisticated composite materials with potential in mechanical, electrical, and photosensitive applications.
| S-EPMC6641722 | biostudies-literature
Project description:Aberrantly truncated immature O-glycosylation in proteins occurs in essentially all types of epithelial cancer cells, which was demonstrated to be a common feature of most adenocarcinomas and strongly associated with cancer proliferation and metastasis. Although extensive efforts have been made toward the development of anticancer antibodies targeting MUC1, one of the most studied mucins having cancer-relevant immature O-glycans, no anti-MUC1 antibody recognises carbohydrates and the proximal MUC1 peptide region, concurrently. Here we present a general strategy that allows for the creation of antibodies interacting specifically with glycopeptidic neoepitopes by using homogeneous synthetic MUC1 glycopeptides designed for the streamlined process of immunization, antibody screening, three-dimensional structure analysis, epitope mapping and biochemical analysis. The X-ray crystal structure of the anti-MUC1 monoclonal antibody SN-101 complexed with the antigenic glycopeptide provides for the first time evidence that SN-101 recognises specifically the essential epitope by forming multiple hydrogen bonds both with the proximal peptide and GalNAc linked to the threonine residue, concurrently. Remarkably, the structure of the MUC1 glycopeptide in complex with SN-101 is identical to its solution NMR structure, an extended conformation induced by site-specific glycosylation. We demonstrate that this method accelerates dramatically the development of a new class of designated antibodies targeting a variety of "dynamic neoepitopes" elaborated by disease-specific O-glycosylation in the immunodominant mucin domains and mucin-like sequences found in intrinsically disordered regions of many proteins.
| S-EPMC8159228 | biostudies-literature
Project description:Composites comprised of Ag3PO4 and bare TiO2 (TiO2@Ag3PO4) or silver doped TiO2 (Ag@TiO2-Ag3PO4) have been synthesized by coupling sol-gel and precipitation methods. For the sake of comparison, also the bare components have been similarly prepared. All the samples have been characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), photoelectrochemical measurements, and specific surface area (SSA) analysis. The optoelectronic and structural features of the samples have been related to their photocatalytic activity for the degradation of 4-nitrophenol under solar and UV light irradiation. Coupling Ag3PO4 with silver doped TiO2 mitigates photocorrosion of the Ag3PO4 counterpart, and remarkably improves the photocatalytic activity under solar light irradiation with respect to the components, to the TiO2-Ag3PO4 sample, and to the benchmark TiO2 Evonik P25. These features open the route to future applications of this material in the field of environmental remediation.
| S-EPMC7221970 | biostudies-literature