Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparison of Graphitic Carbon Nitrides Synthetized from Melamine and Melamine-Cyanurate Complex: Characterization and Photocatalytic Decomposition of Ofloxacin and Ampicillin.

ABSTRACT: Graphitic carbon nitride (g-C₃N₄, hereafter abbreviated as CN) was prepared by the heating of melamine (CN-M) and melamine-cyanurate complex (CN-MCA), respectively, in air at 550 °C for 4 h. The specific surface area (SSA) of CN-M and CN-MCA was 12 m² g^-1 and 225 m²g^-1 and the content of oxygen was 0.62 wt.% and 1.88 wt.%, respectively. The band gap energy (E_g) of CN-M was 2.64 eV and E_g of CN-MCA was 2.73 eV. The photocatalytic activity of the CN materials was tested by means of the decomposition of antibiotics ofloxacin and ampicillin under LED irradiation of 420 nm. The activity of CN-MCA was higher due to its high SSA, which was determined based on the physisorption of nitrogen. Ofloxacin was decomposed more efficiently than ampicillin in the presence of both photocatalysts.

SUBMITTER: Praus P

PROVIDER: S-EPMC8070965 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides.

Project description:The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

| S-EPMC8693081 | biostudies-literature

Semiheterogeneous Dual Nickel/Photocatalytic (Thio)etherification Using Carbon Nitrides.

Project description:A carbon nitride material can be combined with homogeneous nickel catalysts for light-mediated cross-couplings of aryl bromides with alcohols under mild conditions. The metal-free heterogeneous semiconductor is fully recyclable and couples a broad range of electron-poor aryl bromides with primary and secondary alcohols as well as water. The application for intramolecular reactions and the synthesis of active pharmaceutical ingredients was demonstrated. The catalytic protocol is applicable for the coupling of aryl iodides with thiols as well.

| S-EPMC6750873 | biostudies-literature

Graphitic Carbon Nitride for Photocatalytic Air Treatment.

Project description:Graphitic carbon nitride (g-C3N4) is a conjugated polymer, which recently drew a lot of attention as a metal-free and UV and visible light responsive photocatalyst in the field of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability and earth-abundant nature. In the present work, bulk g-C3N4 was synthesized by thermal decomposition of melamine. This material was further exfoliated by thermal treatment. S-doped samples were prepared from thiourea or further treatment of exfoliated g-C3N4 by mesylchloride. Synthesized materials were applied for photocatalytic removal of air pollutants (acetaldehyde and NOx) according to the ISO 22197 and ISO 22197-1 methodology. The efficiency of acetaldehyde removal under UV irradiation was negligible for all g-C3N4 samples. This can be explained by the fact that g-C3N4 under irradiation does not directly form hydroxyl radicals, which are the primary oxidation species in acetaldehyde oxidation. It was proved by electron paramagnetic resonance (EPR) spectroscopy that the dominant species formed on the irradiated surface of g-C3N4 was the superoxide radical. Its production was responsible for a very high NOx removal efficiency not only under UV irradiation (which was comparable with that of TiO2), but also under visible irradiation.

| S-EPMC7372426 | biostudies-literature

One Dimensional Graphitic Carbon Nitrides as Effective Metal-Free Oxygen Reduction Catalysts.

Project description:To explore the effect of morphology on catalytic properties of graphitic carbon nitride (GCN), we have studied oxygen reduction reaction (ORR) performance of two different morphologies of GCN in alkaline media. Among both, tubular GCN react with dissolved oxygen in the ORR with an onset potential close to commercial Pt/C. Furthermore, the higher stability and excellent methanol tolerance of tubular GCN compared to Pt/C emphasizes its suitability for fuel cells.

| S-EPMC4511877 | biostudies-other

Nitrogen-doped Carbon Nanospheres-Modified Graphitic Carbon Nitride with Outstanding Photocatalytic Activity.

Project description:Metals and metal oxides are widely used as photo/electro-catalysts for environmental remediation. However, there are many issues related to these metal-based catalysts for practical applications, such as high cost and detrimental environmental impact due to metal leaching. Carbon-based catalysts have the potential to overcome these limitations. In this study, monodisperse nitrogen-doped carbon nanospheres (NCs) were synthesized and loaded onto graphitic carbon nitride (g-C3N4, GCN) via a facile hydrothermal method for photocatalytic removal of sulfachloropyridazine (SCP). The prepared metal-free GCN-NC exhibited remarkably enhanced efficiency in SCP degradation. The nitrogen content in NC critically influences the physicochemical properties and performances of the resultant hybrids. The optimum nitrogen doping concentration was identified at 6.0 wt%. The SCP removal rates can be improved by a factor of 4.7 and 3.2, under UV and visible lights, by the GCN-NC composite due to the enhanced charge mobility and visible light harvesting. The mechanism of the improved photocatalytic performance and band structure alternation were further investigated by density functional theory (DFT) calculations. The DFT results confirm the high capability of the GCN-NC hybrids to activate the electron-hole pairs by reducing the band gap energy and efficiently separating electron/hole pairs. Superoxide and hydroxyl radicals are subsequently produced, leading to the efficient SCP removal.

| S-EPMC7770884 | biostudies-literature

Biocompatible pH-Degradable Functional Capsules Based on Melamine Cyanurate Self-Assembly.

Project description:Development of adaptive self-regulating materials and chemical-biological systems-self-healing, self-regulating, etc.-is an advanced modern trend. The very sensitive pH-controlled functionality of supramolecular assemblies is a very useful tool for chemical and biochemical implementations. However, the assembly process can be tuned by various factors that can be used for both better functionality control and further functionalization such as active species, e.g., drugs and dyes, and encapsulation. Here, the effect of a dye, sodium fluorescein (uranine) (FL), on the formation of a self-assembled melamine cyanurate (M-CA) structure is investigated and calculated with density functional theory (DFT) and molecular dynamics. Interestingly, the dye greatly affects the self-assembly process at early stages from the formation of dimers, trimers, and tetramer to nucleation control. The supramolecular structure disassembly and subsequent release of trapped dye occurred under both high- and low-pH conditions. This system can be used for time-prolonged bacterial staining and development of supramolecular capsules for the system chemistry approach.

| S-EPMC8280711 | biostudies-literature

Mesoporous Graphitic Carbon Nitrides Decorated with Cu Nanoparticles: Efficient Photocatalysts for Degradation of Tartrazine Yellow Dye.

Project description:A series of mesoporous graphitic carbon nitride (mpg-C?N?) materials are synthesized by directly pyrolyzing melamine containing many embedded silica nanoparticles templates, and then etching the silica templates from the carbonized products. The mass ratio of melamine-to-silica templates and the size of the silica nanoparticles are found to dictate whether or not mpg-C?N? with large surface area and high porosity form. The surfaces of the mpg-C?N? materials are then decorated with copper (Cu) nanoparticles, resulting in Cu-decorated mpg-C?N? composite materials that show excellent photocatalytic activity for degradation of tartrazine yellow dye. The materials' excellent photocatalytic performance is attributed to their high surface area and the synergistic effects created in them by mpg-C?N? and Cu nanoparticles, including the Cu nanoparticles' greater ability to separate photogenerated charge carriers from mpg-C?N?.

| S-EPMC6163193 | biostudies-literature

Improving the Visible-Light Photocatalytic Activity of Graphitic Carbon Nitride by Carbon Black Doping.

Project description:Hydrogen production by water splitting and the removal of aqueous dyes by using a catalyst and solar energy are an ideal future energy source and useful for environmental protection. Graphitic carbon nitride can be used as the photocatalyst with visible light irradiation. However, it typically suffers from the high recombination of carriers and low electrical conductivity. Here, we have developed a facile mix-thermal strategy to prepare carbon black-modified graphitic carbon nitrides, which possess high electrical conductivity, a wide adsorption range of visible light, and a low recombination rate of carriers. With the help of carbon black, highly crystallized graphitic carbon nitrides with built-in triazine and heptazine heterojunctions are obtained. Improved photocatalytic activities have been achieved in carbon black-modified graphitic carbon nitride. The dye removal rate can be three times faster than that of pristine graphitic carbon nitride and the photocatalytic H2 generation is 234 μmol h-1 g-1 under visible light irradiation.

| S-EPMC6643869 | biostudies-literature

A New Synthesis Approach for Carbon Nitrides: Poly(triazine imide) and Its Photocatalytic Properties.

Project description:Poly(triazine imide) (PTI) is a material belonging to the group of carbon nitrides and has shown to have competitive properties compared to melon or g-C3N4, especially in photocatalysis. As most of the carbon nitrides, PTI is usually synthesized by thermal or hydrothermal approaches. We present and discuss an alternative synthesis for PTI which exhibits a pH-dependent solubility in aqueous solutions. This synthesis is based on the formation of radicals during electrolysis of an aqueous melamine solution, coupling of resulting melamine radicals and the final formation of PTI. We applied different characterization techniques to identify PTI as the product of this reaction and report the first liquid state NMR experiments on a triazine-based carbon nitride. We show that PTI has a relatively high specific surface area and a pH-dependent adsorption of charged molecules. This tunable adsorption has a significant influence on the photocatalytic properties of PTI, which we investigated in dye degradation experiments.

| S-EPMC5928491 | biostudies-literature

Photocatalytic Generation of Singlet Oxygen by Graphitic Carbon Nitride for Antibacterial Applications.

Project description:Carbon-based functional nanocomposites have emerged as potent antimicrobial agents and can be exploited as a viable option to overcome antibiotic resistance of bacterial strains. In the present study, graphitic carbon nitride nanosheets are prepared by controlled calcination of urea. Spectroscopic measurements show that the nanosheets consist of abundant carbonyl groups and exhibit apparent photocatalytic activity under UV photoirradiation towards the selective production of singlet oxygen. Therefore, the nanosheets can effectively damage the bacterial cell membranes and inhibit the growth of bacterial cells, such as Gram-negative Escherichia coli, as confirmed in photodynamic, fluorescence microscopy, and scanning electron microscopy measurements. The results from this research highlight the unique potential of carbon nitride derivatives as potent antimicrobial agents.

| S-EPMC11313655 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data