Design and assembly of a domestic water temperature, pH and turbidity monitoring system.
Ontology highlight
ABSTRACT: Objective
The aim of this study was to design a domestic water temperature, pH and turbidity monitoring system that could constantly log temperature, pH and turbidity of water and give alerts in case the parameters are outside the acceptable limits for potable water.Results
The system was designed, assembled and performed as expected. The study indicates that the proposed and designed system outperforms the existing manual monitoring system as it can constantly track and store changes in water quality. This could be used to prepare better treatment processes as well as identify problems in the water distribution system early enough.
SUBMITTER: Nanyanzi DR
PROVIDER: S-EPMC8086135 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Water pollution always occurs in Malaysia due to industrial, construction, agriculture, and household activities. River pollution can disturb water supply that eventually affects business and household activities. Thus, water quality monitoring system is needed to detect contaminated water. We developed a water quality monitoring and filtration system controlled by Arduino. The proposed system was designed in Proteus software and ThingSpeak platform was used for real-time monitoring. The main objective of the study was to compare water quality of river, lake and tap water in terms of pH, temperature, turbidity, electrical conductivity and oxidation-reduction potential. If the water quality was not satisfied, the water sample would be filtered through filtration system. Water turbidity level, pH, temperature, electrical conductivity, and oxidation-reduction potential for filtered and nonfiltered water were compared and analyzed according to international and national water quality standard. Besides that, statistical analysis such as box plot and one-way analysis of variance test was applied to validate data from the system. The real-time water quality monitoring system was implemented through data storage, data transfer, and data processing. The system was connected to wireless fidelity whereas the output data was sent to the user and monitored by ThingSpeak. The system can be further upgraded and scaled up to be applied in the main tank at our home or factory. The outcome of this research can be used as a reference for further study on lake and river pollution monitoring system.Supplementary informationThe online version contains supplementary material available at 10.1007/s13762-022-04192-x.
| S-EPMC9187848 | biostudies-literature
Project description:BackgroundLocation-specific patterns of regulated and non-regulated disinfection byproducts (DBPs) were detected in tap water samples of the Barcelona Metropolitan Area. However, it remains unclear if the detected DBPs together with undetected DPBs and organic micropollutants can lead to mixture effects in drinking water.ObjectiveTo evaluate the neurotoxicity, oxidative stress response and cytotoxicity of 42 tap water samples, 6 treated with activated carbon filters, 5 with reverse osmosis and 9 bottled waters. To compare the measured effects of the extracts with the mixture effects predicted from the detected concentrations and the relative effect potencies of the detected DBPs using the mixture model of concentration addition.MethodsMixtures of organic chemicals in water samples were enriched by solid phase extraction and tested for cytotoxicity and neurite outgrowth inhibition in the neuronal cell line SH-SY5Y and for cytotoxicity and oxidative stress response in the AREc32 assay.ResultsUnenriched water did not trigger neurotoxicity or cytotoxicity. After up to 500-fold enrichment, few extracts showed cytotoxicity. Disinfected water showed low neurotoxicity at 20- to 300-fold enrichment and oxidative stress response at 8- to 140-fold enrichment. Non-regulated non-volatile DBPs, particularly (brominated) haloacetonitriles dominated the predicted mixture effects of the detected chemicals and predicted effects agreed with the measured effects. By hierarchical clustering we identified strong geographical patterns in the types of DPBs and their association with effects. Activated carbon filters did not show a consistent reduction of effects but domestic reverse osmosis filters decreased the effect to that of bottled water.Impact statementBioassays are an important complement to chemical analysis of disinfection by-products (DBPs) in drinking water. Comparison of the measured oxidative stress response and mixture effects predicted from the detected chemicals and their relative effect potencies allowed the identification of the forcing agents for the mixture effects, which differed by location but were mainly non-regulated DBPs. This study demonstrates the relevance of non-regulated DBPs from a toxicological perspective. In vitro bioassays, in particular reporter gene assays for oxidative stress response that integrate different reactive toxicity pathways including genotoxicity, may therefore serve as sum parameters for drinking water quality assessment.
| S-EPMC10907286 | biostudies-literature
Project description:Novel brush coatings were fabricated with glass surface-grafted chains copolymerized using surface-initiated atom transfer radical polymerization (SI-ATRP) from 2-(2-methoxyethoxy)ethyl methacrylate (OEGMA188) and acrylamide (AAm), taken in different proportions. P(OEGMA188-co-AAm) brushes with AAm mole fraction >44% (determined with XPS and TOF-SIMS spectroscopy) and nearly constant with the depth copolymer composition (TOF-SIMS profiling) exhibit unusual temperature-induced transformations: The contact angle of water droplets on P(OEGMA188-co-AAm) coatings increases by ∼45° with temperature, compared to 17-18° for POEGMA188 and PAAm. The thickness of coatings immersed in water and the morphology of coatings imaged in air show a temperature response for POEGMA188 (using reflectance spectroscopy and AFM, respectively), but this response is weak for P(OEGMA188-co-AAm) and absent for PAAm. This suggests mechanisms more complex than a simple transition between hydrated loose coils and hydrophobic collapsed chains. For POEGMA188, the hydrogen bonds between the ether oxygens of poly(ethylene glycol) and water hydrogens are formed below the transition temperature Tc and disrupted above Tc when polymer-polymer interactions are favored. Different hydrogen bond structures of PAAm include free amide groups, cis-trans-multimers, and trans-multimers of amide groups. Here, hydrogen bonds between free amide groups and water dominate at T < Tc but structures favored at T > Tc, such as cis-trans-multimers and trans-multimers of amide groups, can still be hydrated. The enhanced temperature-dependent response of wettability for P(OEGMA188-co-AAm) with a high mole fraction of AAm suggests the formation at Tc of more hydrophobic structures, realized by hydrogen bonding between the ether oxygens of OEGMA188 and the amide fragments of AAm, where water molecules are caged. Furthermore, P(OEGMA188-co-AAm) coatings immersed in pH buffer solutions exhibit a 'schizophrenic' behavior in wettability, with transitions that mimic LCST and UCST for pH = 3, LCST for pH = 5 and 7, and any transition blocked for pH = 9.
| S-EPMC9940115 | biostudies-literature
Project description:In this article, we report the synthesis and physical characterization of colloidal polystyrene particles that carry water-soluble supramolecular N,N',N″,-trialkyl-benzene-1,3,5-tricarboxamides (BTAs) on their surface. These molecules are known to assemble into one-dimensional supramolecular polymers via noncovalent interactions. By tethering the BTAs to charge-stabilized particles, the clustering behavior of the resulting colloids was dictated by a balance between interparticle electrostatic repulsion and the BTA-mediated attractions. Through careful tuning of the dispersing medium's ionic strength, a regime was found in which particle aggregation could be reversibly induced upon heating the dispersion. These findings clearly indicate that hydrophobic interactions, which become stronger upon heating, play an important role during the clustering process. Besides the thermoreversible nature of the generated hydrophobic interparticle attractions, we found the clustering to be selective, that is, the BTA-functionalized colloids do not interact with nonfunctionalized hydrophobic polystyrene particles. This selectivity in the association process can be rationalized by the preferred stacking of the surface-tethered BTAs. These selective intermolecular/particle bonds are likely stabilized by the formation of hydrogen bonds, as previously observed for analogous molecular BTA assemblies. The resulting driving force responsible for particle clustering is therefore dual in nature and depends on both hydrophobic attractions and hydrogen bonding.
| S-EPMC6640978 | biostudies-literature
Project description:Water immersion insertion has been documented to decrease procedure-related discomfort during colonoscopy. There was used warm water infusion for colonoscope insertion in most of the water immersion colonoscopy trials.
The investigators have been using room temperature water (20-24°C) for water immersion and the investigators did not notice any drawback of it. In our opinion, it is simpler and cheaper option for water immersion colonoscopy and proof of its efficacy and safety could support the use of water immersion technique in routine practice.
The primary endpoint is cecal intubation time and the investigators suppose that the use of warm water infusion does not shorten it significantly. Patient comfort during colonoscope insertion, water consumption, length of the scope while reaching the cecum, need for external compression, need for positioning of the patient and endoscopist´s difficulty with colonoscopy will be also assessed.
| 2124104 | ecrin-mdr-crc
Project description:High turbidity and elevated water temperature are environmental stressors that can co-occur in freshwater ecosystems such as when deforestation increases solar radiation and sedimentary runoff. However, we have limited knowledge about their combined impacts on fish behaviour and physiology. We explored independent and interactive effects of sedimentary turbidity and temperature on the swimming activity and both thermal and hypoxia tolerance of the Pugnose Shiner (Miniellus anogenus, formerly Notropis anogenus), a small leuciscid fish listed as Threatened under Canada's Species at Risk Act (SARA). Fish underwent a 15-week acclimation to two temperatures (16°C or 25°C) crossed with two turbidities (~0 NTU or 8.5 NTU). Swimming activity was measured during the first 8 weeks of acclimation. Fish in warm water were more active compared to those in cold water, but turbidity had no effect on activity. Behavioural response to hypoxia was measured after 12 weeks of acclimation, as the oxygen level at which fish used aquatic surface respiration (ASR). Fish in warm water engaged in ASR behaviour at higher oxygen thresholds, indicating less tolerance to hypoxia. Turbidity had no effect on ASR thresholds. Finally, thermal tolerance was measured as the critical thermal maximum (CTmax) after 13-15 weeks of acclimation. Acclimation to warm water increased fish CTmax and Tag (agitation temperature) but reduced the agitation window (°C difference between Tag and CTmax) and thermal safety margin (°C difference between the acclimation temperature and CTmax). Furthermore, fish in warm, turbid water had a lower CTmax and smaller thermal safety margin than fish in warm, clear water, indicating an interaction between turbidity and temperature. This reduced thermal tolerance observed in Pugnose Shiner in warm, turbid water highlights the importance of quantifying independent and interactive effects of multiple stressors when evaluating habitat suitability and conservation strategies for imperilled species.
| S-EPMC11320368 | biostudies-literature
Project description:Domestic ferret with Bionano hybrid scaffolds
| PRJEB38264 | ENA
Project description:Type I collagen gels are routinely used in biophysical studies and bioengineering applications. The structural and mechanical properties of these fibrillar matrices depend on the conditions under which collagen fibrillogenesis proceeds, and developing a fuller understanding of this process will enhance control over gel properties. Turbidity measurements have long been the method of choice for monitoring developing gels, whereas imaging methods are regularly used to visualize fully developed gels. In this study, turbidity and confocal reflectance microscopy (CRM) were simultaneously employed to track collagen fibrillogenesis and reconcile the information reported by the two techniques, with confocal fluorescence microscopy (CFM) used to supplement information about early events in fibrillogenesis. Time-lapse images of 0.5 mg/ml, 1.0 mg/ml, and 2.0 mg/ml acid-solubilized collagen I gels forming at 27°C, 32°C, and 37°C were collected. It was found that in situ turbidity measured in a scanning transmittance configuration was interchangeable with traditional turbidity measurements using a spectrophotometer. CRM and CFM were employed to reveal the structures responsible for the turbidity that develops during collagen self-assembly. Information from CRM and transmittance images was collapsed into straightforward single variables; total intensity in CRM images tracked turbidity development closely for all collagen gels investigated, and the two techniques were similarly sensitive to fibril number and dimension. Complementary CRM, CFM, and in situ turbidity measurements revealed that fibril and network formation occurred before substantial turbidity was present, and the majority of increasing turbidity during collagen self-assembly was due to increasing fibril thickness.
| S-EPMC4008796 | biostudies-other
Project description:Rivers (on land) and turbidity currents (in the ocean) are the most important sediment transport processes on Earth. Yet how rivers generate turbidity currents as they enter the coastal ocean remains poorly understood. The current paradigm, based on laboratory experiments, is that turbidity currents are triggered when river plumes exceed a threshold sediment concentration of ~1 kg/m3. Here we present direct observations of an exceptionally dilute river plume, with sediment concentrations 1 order of magnitude below this threshold (0.07 kg/m3), which generated a fast (1.5 m/s), erosive, short-lived (6 min) turbidity current. However, no turbidity current occurred during subsequent river plumes. We infer that turbidity currents are generated when fine sediment, accumulating in a tidal turbidity maximum, is released during spring tide. This means that very dilute river plumes can generate turbidity currents more frequently and in a wider range of locations than previously thought.
| S-EPMC6919390 | biostudies-literature
Project description:Fine sediment transport in rivers is important for catchment nutrient fluxes, global biogeochemical cycles, water quality and pollution in riverine, coastal and marine ecosystems. Monitoring of suspended sediment in rivers with current sensors is challenging and expensive and most monitoring setups are restricted to few single site measurements. To better understand the spatial heterogeneity of fine sediment sources and transport in river networks there is a need for new smart water turbidity sensing that is multi-site, accurate and affordable. In this work, we have created such a sensor, which detects scattered light from an LED source using two detectors in a control volume, and can be placed in a river. We compare several replicates of our sensor to different commercial turbidity probes in a mixing tank experiment using two sediment types over a wide range of typical concentrations observed in rivers. Our results show that we can achieve precise and reproducible turbidity measurements in the 0-4000 NTU or 0-16g/L range. Our sensor can also be used directly as a suspended sediment sensor and bypass an unnecessary calibration to Formazin. The developed turbidity sensor is much cheaper than existing options of comparable quality and is especially intended for distributed sensing across river networks.
| S-EPMC9209475 | biostudies-literature