Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Catalysis of the electrochemical oxygen reduction reaction (ORR) by animal and human cells.

ABSTRACT: Animal cells from the Vero lineage and MRC5 human cells were checked for their capacity to catalyse the electrochemical oxygen reduction reaction (ORR). The Vero cells needed 72 hours' incubation to induce ORR catalysis. The cyclic voltammetry curves were clearly modified by the presence of the cells with a shift of ORR of 50 mV towards positive potentials and the appearance of a limiting current (59 μA.cm-2). The MRC5 cells induced considerable ORR catalysis after only 4 h of incubation with a potential shift of 110 mV but with large experimental deviation. A longer incubation time, of 24 h, made the results more reproducible with a potential shift of 90 mV. The presence of carbon nanotubes on the electrode surface or pre-treatment with foetal bovine serum or poly-D-lysine did not change the results. These data are the first demonstrations of the capability of animal and human cells to catalyse electrochemical ORR. The discussion of the possible mechanisms suggests that these pioneering observations could pave the way for electrochemical biosensors able to characterize the protective system of cells against oxidative stress and its sensitivity to external agents.

SUBMITTER: Guette-Marquet S

PROVIDER: S-EPMC8099096 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Comprehensive Study of the Enzymatic Catalysis of the Electrochemical Oxygen Reduction Reaction (ORR) by Immobilized Copper Efflux Oxidase (CueO) From <i>Escherichia coli</i>.

Project description:In recent years, enzymatic fuel cells have experienced a great development promoted by the availability of novel biological techniques that allow the access to a large number of enzymatic catalysts. One of the most important aspects in this area is the development of biocatalysts for the oxygen reduction reaction (ORR). Laccases from the group of enzymes called blue multi-cooper oxidases have received considerable attention because of their ability to catalyze the electrochemical oxygen reduction reaction to water when immobilized on metallic or carbonaceous electrode materials. In this paper we report a comprehensive study of the electrocatalytic activity of the enzyme Copper efflux oxidase (CueO) from Escherichia coli immobilized on different electrode materials. The influence of the electrode substrate employed for protein immobilization was evaluated using glassy carbon, gold or platinum electrodes. Gold and platinum electrodes were modified using different self-assembled monolayers (SAM) able to tune the electrostatic interaction between the protein and the substrate, depending on the nature of the terminal functional group in the SAM. The effects of protein immobilization time, electrode potential, solution pH and temperature, protein and O2 concentration have been carefully investigated. Finally, direct electron transfer (DET) was investigated in the presence of the following inhibitors: fluoride (F-), chloride (Cl-) and azide ( N3- ).

| S-EPMC6117412 | biostudies-literature

Metal Oxide (Co3O4 and Mn3O4) Impregnation into S, N-doped Graphene for Oxygen Reduction Reaction (ORR).

Project description:To address aggravating environmental and energy problems, active, efficient, low-cost, and robust electrocatalysts (ECs) are actively pursued as substitutes for the current noble metal ECs. Therefore, in this study, we report the preparation of graphene flakes (GF) doped with S and N using 2-5-dimercapto-1,3,4-thiadiazole (S3N2) as precursor followed by the immobilization of cobalt spinel oxide (Co3O4) or manganese spinel oxide (Mn3O4) nanoparticles through a one-step co-precipitation procedure (Co/S3N2-GF and Mn/S3N2-GF). Characterization by different physicochemical techniques (Fourier Transform Infrared (FTIR), Raman spectroscopy, Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD)) of both composites shows the preservation of the metal oxide spinel structure and further confirms the successful preparation of the envisaged electrocatalysts. Co/S3N2-GF composite exhibits the best ORR performance with an onset potential of 0.91 V vs. RHE, a diffusion-limiting current density of -4.50 mA cm-2 and selectivity for the direct four-electron pathway, matching the results obtained for commercial Pt/C. Moreover, both Co/S3N2-GF and Mn/S3N2-GF showed excellent tolerance to methanol poisoning and good stability.

| S-EPMC7177977 | biostudies-literature

DABCO Derived Nitrogen-Doped Carbon Nanotubes for Oxygen Reduction Reaction (ORR) and Removal of Hexavalent Chromium from Contaminated Water.

Project description:Though chemically-derived reduced graphene oxide (CDG) from graphite oxide (GO) precursors is a widely practiced procedure for the large-scale production of graphene, the quality and quantity of thus obtained CDG is dependent on the reduction strategy used. In this work, we report an all-solid-state, residue-free, microwave process for the reduction of graphene oxide and subsequent growth of carbon nanotube 'separators' from a single precursor, namely DABCO (1,4-diazabicyclo[2.2.2]octane). The utility of our newly developed technique in efficiently and effectively reducing graphene oxide and in growing nitrogen-doped carbon nanotubes via catalysts like palladium and iron into unique mesoporous, 3-D hierarchical carbon nanostructures is demonstrated. The applicability of the thus obtained palladium embedded in Pd@NCNT-rGO nanoarchitectures for the oxygen reduction reaction (ORR) is investigated. When carbon fiber (CF) was used as the substrate, three-dimensional Fe@NCNT-CF were obtained, whose capability as versatile adsorbents for hexavalent chromium ion removal from contaminated waters was also demonstrated.

| S-EPMC8199063 | biostudies-literature

Nanosheets with High-Performance Electrochemical Oxygen Reduction Reaction Revived from Green Walnut Peel.

Project description:The synthesis of metal-free carbon-based electrocatalysts for oxygen reduction reactions (ORR) to replace conventional Pt-based catalysts has become a hot spot in current research. This work proposes an activation-assisted carbonization strategy, to manufacture N-doped ultra-thin carbon nanosheets (GWS180M800) with high catalytic activity, namely, melamine is used as an accelerator/nitrogen source, and walnut green peels biological waste as a carbon source. The melamine acts as a nitrogen donor in the hydrothermal process, effectively enhancing the nitrogen doping rate. The content of pyridine nitrogen groups accounts for up to 48.5% of the total nitrogen content. Electrochemical tests show that the GWS180M800 has excellent ORR electrocatalytic activity and stability, and makes a quasi-four-electron ORR pathway clear in the alkaline electrolyte. The initial potential and half slope potential are as high as 1.01 and 0.82 V vs. RHE, respectively. The GWS180M800 catalyst has a better ability to avoid methanol cross poisoning than Pt/C has. Compared with 20 wt% Pt/C, GWS180M800 has improved methanol tolerance and stability. It is a metal-free biochar ORR catalyst with great development potential and application prospects. This result provides a new space for the preparation of valuable porous nano-carbon materials based on carbonaceous solid waste and provides new ideas for catalyzing a wide range of electrochemical reactions in the future.

| S-EPMC8746947 | biostudies-literature

Isolated Au Atom Anchored on Porous Boron Nitride as a Promising Electrocatalyst for Oxygen Reduction Reaction (ORR): A DFT Study.

Project description:The development of efficient, stable, and low-cost catalytic material for the oxygen reduction reaction (ORR) is currently highly desirable but challenging. In this work, based on first-principles calculation, the stabilities, catalytic activities and catalytic mechanisms of isolated Au atom supported on defective porous BN (p-BN) have been studied in detail. The results reveal that the defective p-BN anchor Au atom strongly to ensure the stability of Au/p-BN. Based on frontier molecular orbital and charge-density analysis, isolated Au atom supported on porous BN with VN defect (Au/p-BN-VN) is an effective ORR catalyst. Especially, the low barriers of the formation (0.38 eV) and dissociation (0.31 eV) of *OOH and the instability of H2O2 on Au/p-BN-VN catalyst suggest that ORR proceeds via 4-electron pathway. Along the favorable pathway, the reduction of O2 to *OOH is the rate-limiting step with the largest activation barrier of 0.38 eV and the maximum free energy change is 1.88 eV. Our results provide a useful guidance for the design and fabrication of new Au-base catalyst with high-efficiency and are beneficial for the developing of novel isolated metal atom catalysts for ORR.

| S-EPMC6811612 | biostudies-literature

Origin of the catalytic activity of phosphorus doped MoS<sub>2</sub> for oxygen reduction reaction (ORR) in alkaline solution: a theoretical study.

Project description:Phosphorus doped MoS2 nanosheets (P-doped MoS2) have been reported as excellent oxygen reduction reaction (ORR) catalysts with four-electron selectivity in alkaline solution. By performing density functional theory (DFT) calculations, we revealed the detailed reaction mechanism and the key reaction sites on surface of P-doped MoS2 for ORR catalysis. The double P-doped MoS2 (2P-MoS2) is calculated to be more stable than the single P-doped MoS2 (P-MoS2), and the configuration with two P atoms in neighboring sites exhibits the highest stability. The surface of P-doped MoS2 is found highly active for dissociation of O2. Comparative calculations reveal that P-MoS2 is unsuitable as ORR catalyst due to the high dissociation barrier of H2O (1.19 and 2.06?eV for the first and second adsorbed H2O), while the 2P-MoS2 shows good ORR catalytic activity with much lower dissociation barrier of H2O (0.62?eV). Furthermore, we elucidated that the ORR catalytic activity in 2P-MoS2 originates from the activated S2 atom, which provides an extra adsorption site for the first H2O and the following OH group benefited from the enhanced hydrogen bond interaction. Our results illustrate the mechanisms of doped MoS2 based catalysts and provide rational way for designing ORR catalysts with high activity.

| S-EPMC6125367 | biostudies-literature

Facile Synthesis of Mayenite Electride Nanoparticles Encapsulated in Graphitic Shells Like Carbon Nano Onions: Non-noble-metal Electrocatalysts for Oxygen Reduction Reaction (ORR).

Project description:This manuscript presented a large scale synthesis of Graphitic Shells like carbon nano onions (GS-CNOs) by direct solution method using mayenite electride as a catalyst for synthesis of CNOs. Thermal characterization, microstructural analysis, and high resolution electron microscopy have confirmed the graphitization and revealed the resulting GS-CNOs with particle size about 15 nm, maximum BET surface area of 214 m2.g-1, and moderate conductivity of 250 S.cm-1, thus providing a new approach to synthesize GS-CNOs. The reported GS-CNOs, which acts as more active but less expensive electrocatalysts with onset potential of 1.03 V, half wave potential of 0.88 V vs. the reversible hydrogen electrode (RHE), and limited current density of 5.9 mA.cm-2, higher than that of benchmark 20% Pt/C (1.02 eV, 0.82 V, 5.2 mA.cm-2). The synthesized nano-powder acts as an origin of ORR activity via a four electron (4e-) pathway, along with significantly enhanced stability, in alkaline media. The high ORR activity is ascribed to GS-CNOs embedded sufficient metallic C12A7:e- particles, which favor faster electron movement and better adsorption of oxygen molecules on catalyst surface. Hence, we explored first time large scale synthesis of GS-CNOs with gram level and provide efficient approach to prepare novel, lowest cost, potential non-noble metals catalyst for fuel cells.

| S-EPMC6987263 | biostudies-literature

Electrochemical oxygen reduction catalysed by Ni3(hexaiminotriphenylene)2.

Project description:Control over the architectural and electronic properties of heterogeneous catalysts poses a major obstacle in the targeted design of active and stable non-platinum group metal electrocatalysts for the oxygen reduction reaction. Here we introduce Ni3(HITP)2 (HITP=2, 3, 6, 7, 10, 11-hexaiminotriphenylene) as an intrinsically conductive metal-organic framework which functions as a well-defined, tunable oxygen reduction electrocatalyst in alkaline solution. Ni3(HITP)2 exhibits oxygen reduction activity competitive with the most active non-platinum group metal electrocatalysts and stability during extended polarization. The square planar Ni-N4 sites are structurally reminiscent of the highly active and widely studied non-platinum group metal electrocatalysts containing M-N4 units. Ni3(HITP)2 and analogues thereof combine the high crystallinity of metal-organic frameworks, the physical durability and electrical conductivity of graphitic materials, and the diverse yet well-controlled synthetic accessibility of molecular species. Such properties may enable the targeted synthesis and systematic optimization of oxygen reduction electrocatalysts as components of fuel cells and electrolysers for renewable energy applications.

| S-EPMC4786780 | biostudies-literature

Conversion of Catalytically Inert 2D Bismuth Oxide Nanosheets for Effective Electrochemical Hydrogen Evolution Reaction Catalysis via Oxygen Vacancy Concentration Modulation.

Project description:Oxygen vacancies (Vo) in electrocatalysts are closely correlated with the hydrogen evolution reaction (HER) activity. The role of vacancy defects and the effect of their concentration, however, yet remains unclear. Herein, Bi2O3, an unfavorable electrocatalyst for the HER due to a less than ideal hydrogen adsorption Gibbs free energy (ΔGH*), is utilized as a perfect model to explore the function of Vo on HER performance. Through a facile plasma irradiation strategy, Bi2O3 nanosheets with different Vo concentrations are fabricated to evaluate the influence of defects on the HER process. Unexpectedly, while the generated oxygen vacancies contribute to the enhanced HER performance, higher Vo concentrations beyond a saturation value result in a significant drop in HER activity. By tunning the Vo concentration in the Bi2O3 nanosheets via adjusting the treatment time, the Bi2O3 catalyst with an optimized oxygen vacancy concentration and detectable charge carrier concentration of 1.52 × 1024 cm-3 demonstrates enhanced HER performance with an overpotential of 174.2 mV to reach 10 mA cm-2, a Tafel slope of 80 mV dec-1, and an exchange current density of 316 mA cm-2 in an alkaline solution, which approaches the top-tier activity among Bi-based HER electrocatalysts. Density-functional theory calculations confirm the preferred adsorption of H* onto Bi2O3 as a function of oxygen chemical potential (∆μO) and oxygen partial potential (PO2) and reveal that high Vo concentrations result in excessive stability of adsorbed hydrogen and hence the inferior HER activity. This study reveals the oxygen vacancy concentration-HER catalytic activity relationship and provides insights into activating catalytically inert materials into highly efficient electrocatalysts.

| S-EPMC8975907 | biostudies-literature

Efficient oxygen reduction catalysis by subnanometer Pt alloy nanowires.

Project description:The common knowledge is that Pt and Pt alloy nanoparticles (NPs) less than 2 nm are not desirable for oxygen reduction reaction (ORR). However, whether the same trend is expected in Pt-based nanowires (NWs) and nanoplates remains questionable because there is no scalable approach to make such Pt nanostructures. We report a general approach for preparing subnanometer Pt alloy NWs with a diameter of only 4 to 5 atomic layer thickness, ranging from monometallic Pt NWs to bimetallic PtNi and PtCo NWs and to trimetallic PtNiCo NWs. In a sharp contrast to Pt alloy NPs, the subnanometer Pt alloy NWs demonstrate exceptional mass and specific activities of 4.20 A/mg and 5.11 mA/cm2 at 0.9 V versus reversible hydrogen electrode (RHE), respectively, 32.3 and 26.9 times higher than those of the commercial Pt/C. Density functional theory simulations reveal that the enhanced ORR activities are attributed to the catalytically active sites on high-density (111) facets in the subnanometer Pt alloy NWs. They are also very stable under the ORR condition with negligible activity decay over the course of 30,000 cycles. Our work presents a new approach to maximize Pt catalytic efficiency with atomic level utilization for efficient heterogeneous catalysis and beyond.

| S-EPMC5325541 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data