Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Behaviors and physical mechanism of ceftezole sodium de-agglomeration driven by ultrasound.

ABSTRACT: Ultrasound-mediated method, which can effectively disperse agglomerates or even eliminate agglomeration, has received more and more attentions in industrial crystallization. However, the ultrasound-mediated de-agglomeration mechanism has not been well understood, and no general conclusions have been drawn. In this study, the crystallization and de-agglomeration process of ceftezole sodium agglomerates under ultrasound irradiation were systematically investigated. Kapur function was selected to investigate the de-agglomeration process under different ultrasonic powers. The results revealed that ultrasound could efficiently inhibit agglomeration. Besides, the de-agglomeration of large sized agglomerate particles was found to be easier to occur in comparison with small sized particles due to its higher specific breakage rate. Finally, the de-agglomeration mechanism under ultrasonic irradiation was proposed on the basis of the calculated cumulative breakage functions.

SUBMITTER: Cheng X

PROVIDER: S-EPMC8100626 | biostudies-literature | 2021 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Behaviors and physical mechanism of ceftezole sodium de-agglomeration driven by ultrasound.

Cheng Xiaowei X Huang Xin X Tian Beiqian B Wang Ting T Hao Hongxun H

Ultrasonics sonochemistry 20210420

Ultrasound-mediated method, which can effectively disperse agglomerates or even eliminate agglomeration, has received more and more attentions in industrial crystallization. However, the ultrasound-mediated de-agglomeration mechanism has not been well understood, and no general conclusions have been drawn. In this study, the crystallization and de-agglomeration process of ceftezole sodium agglomerates under ultrasound irradiation were systematically investigated. Kapur function was selected to i ...[more]

PMID: 33930689

Similar Datasets

Molecular mechanism of light-driven sodium pumping.

Project description:The light-driven sodium-pumping rhodopsin KR2 from Krokinobacter eikastus is the only non-proton cation active transporter with demonstrated potential for optogenetics. However, the existing structural data on KR2 correspond exclusively to its ground state, and show no sodium inside the protein, which hampers the understanding of sodium-pumping mechanism. Here we present crystal structure of the O-intermediate of the physiologically relevant pentameric form of KR2 at the resolution of 2.1?Å, revealing a sodium ion near the retinal Schiff base, coordinated by N112 and D116 of the characteristic NDQ triad. We also obtained crystal structures of D116N and H30A variants, conducted metadynamics simulations and measured pumping activities of putative pathway mutants to demonstrate that sodium release likely proceeds alongside Q78 towards the structural sodium ion bound between KR2 protomers. Our findings highlight the importance of pentameric assembly for sodium pump function, and may be used for rational engineering of enhanced optogenetic tools.

| S-EPMC7195465 | biostudies-literature

Mechanism and kinetics of a sodium-driven bacterial flagellar motor.

Project description:The bacterial flagellar motor is a large rotary molecular machine that propels swimming bacteria, powered by a transmembrane electrochemical potential difference. It consists of an ?50-nm rotor and up to ?10 independent stators anchored to the cell wall. We measured torque-speed relationships of single-stator motors under 25 different combinations of electrical and chemical potential. All 25 torque-speed curves had the same concave-down shape as fully energized wild-type motors, and each stator passes at least 37 ± 2 ions per revolution. We used the results to explore the 25-dimensional parameter space of generalized kinetic models for the motor mechanism, finding 830 parameter sets consistent with the data. Analysis of these sets showed that the motor mechanism has a "powerstroke" in either ion binding or transit; ion transit is channel-like rather than carrier-like; and the rate-limiting step in the motor cycle is ion binding at low concentration, ion transit, or release at high concentration.

| S-EPMC3710797 | biostudies-other

Agglomeration of particles by a converging ultrasound field and their quantitative assessments.

Project description:The acoustic radiation force resulting from acoustic waves have been extensively studied for the contact-free generation of organized patterning arrays. The precise arrangement of microscopic objects clustered at the pressure nodes is critical to the development of functional structures and patterned surfaces. However, the size of the clusters is restricted by the saturation limit of the acoustic nodes. Here, we present a bulk acoustic wave (BAW) platform, which employs a two-dimensional acoustic wave to propel particles of various sizes. Experimentally, when particles are large, significant acoustic energy is scattered and partly absorbed by the matched layers in front of the sensors. The acoustic radiation force from a convergent acoustic pressure field agglomerates the large polystyrene (PS) particles towards the central region instead of the pressure nodes. The parametric analysis has been performed to assess the transition in the particles from clustering at the organized nodal arrays to agglomerating in the central region, which is a function of particle size, particle concentration, and load voltage. Statistically, the particles can agglomerate with a cluster ratio greater than 70%, and this ratio can be improved by increasing the load power/voltage supplied to the transducers. With its ability to perform biocompatible, label-free, and contact-free self-assembly, this concept offers a new possibility in the fabrication of colloidal layers, the recreation of tissue microstructure, the development of organoid spheroid cultures, the migration of microorganisms, and the assembly of bioprinting materials.

| S-EPMC8165450 | biostudies-literature

Sparsity driven ultrasound imaging.

Project description:An image formation framework for ultrasound imaging from synthetic transducer arrays based on sparsity-driven regularization functionals using single-frequency Fourier domain data is proposed. The framework involves the use of a physics-based forward model of the ultrasound observation process, the formulation of image formation as the solution of an associated optimization problem, and the solution of that problem through efficient numerical algorithms. The sparsity-driven, model-based approach estimates a complex-valued reflectivity field and preserves physical features in the scene while suppressing spurious artifacts. It also provides robust reconstructions in the case of sparse and reduced observation apertures. The effectiveness of the proposed imaging strategy is demonstrated using experimental data.

| S-EPMC3292603 | biostudies-other

Modeling human migration driven by changing mindset, agglomeration, social ties, and the environment.

Project description:Migration is an adaptation strategy to unfavorable conditions and is governed by a complex set of socio-economic and environmental drivers. Here we identified important drivers relatively underrepresented in many migration models-CHanging mindset, Agglomeration, Social ties, and the Environment (CHASE)-and asked: How does the interplay between these drivers influence transient dynamics and long-term outcomes of migration? We addressed this question by developing and analyzing a parsimonious Markov chain model. Our findings suggest that these drivers interact in nonlinear and complex ways. The system exhibits legacy effects, highlighting the importance of including migrants' changing priorities. The increased characteristic population size of the system counter-intuitively leads to fewer surviving cities, and this effect is mediated by how fast migrants change their mindsets and how strong the social ties are. Strong social ties result in less diverse populations across cities, but this effect is influenced by how many cities remain. To our knowledge, this is the first time that these drivers are incorporated in one coherent, mechanistic, parsimonious model and the effects of their interplay on migration systematically studied. The complex interplay underscores the need to incorporate these drivers into mechanistic migration models and implement such models for real-world cases.

| S-EPMC8884484 | biostudies-literature

Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements.

Project description:Ultrasonic de-agglomeration and dispersion of oxides is important for a range of applications. In particular, in liquid metal, this is one of the ways to produce metal-matrix composites reinforced with micron and nano sized particles. The associated mechanism through which the de-agglomeration occurs has, however, only been conceptualized theoretically and not yet been validated with experimental observations. In this paper, the influence of ultrasonic cavitation on SiO2 and MgO agglomerates (commonly found in lightweight alloys as reinforcements) with individual particle sizes ranging between 0.5 and 10 μm was observed for the first time in-situ using high-speed imaging. Owing to the opacity of liquid metals, a de-agglomeration imaging experiment was carried out in de-ionised water with sequences captured at frame rates up to 50 kfps. In-situ observations were further accompanied by synchronised acoustic measurements using an advanced calibrated cavitometer, to reveal the effect of pressure amplitude arising from oscillating microbubbles on oxide de-agglomeration. Results showed that ultrasound-induced microbubble clusters pulsating chaotically, were predominantly responsible for the breakage and dispersion of oxide agglomerates. Such oscillating cavitation clusters were seen to capture the floating agglomerates resulting in their immediate disintegration. De-agglomeration of oxides occurred from both the surface and within the bulk of the aggregate. Microbubble clusters oscillating with associated emission frequencies at the subharmonic, 1st harmonic and low order ultra-harmonics of the driving frequency were deemed responsible for the breakage of the agglomerates.

| S-EPMC8524947 | biostudies-literature

Altruistic behaviors relieve physical pain.

Project description:Engaging in altruistic behaviors is costly, but it contributes to the health and well-being of the performer of such behaviors. The present research offers a take on how this paradox can be understood. Across 2 pilot studies and 3 experiments, we showed a pain-relieving effect of performing altruistic behaviors. Acting altruistically relieved not only acutely induced physical pain among healthy adults but also chronic pain among cancer patients. Using functional MRI, we found that after individuals performed altruistic actions brain activity in the dorsal anterior cingulate cortex and bilateral insula in response to a painful shock was significantly reduced. This reduced pain-induced activation in the right insula was mediated by the neural activity in the ventral medial prefrontal cortex (VMPFC), while the activation of the VMPFC was positively correlated with the performer's experienced meaningfulness from his or her altruistic behavior. Our findings suggest that incurring personal costs to help others may buffer the performers from unpleasant conditions.

| S-EPMC6969495 | biostudies-literature

The agglomeration state of nanoparticles can influence the mechanism of their cellular internalisation.

Project description:Significant progress of nanotechnology, including in particular biomedical and pharmaceutical applications, has resulted in a high number of studies describing the biological effects of nanomaterials. Moreover, a determination of so-called "critical quality attributes", that is specific physicochemical properties of nanomaterials triggering the observed biological response, has been recognised as crucial for the evaluation and design of novel safe and efficacious therapeutics. In the context of in vitro studies, a thorough physicochemical characterisation of nanoparticles (NPs), also in the biological medium, is necessary to allow a correlation with a cellular response. Following this concept, we examined whether the main and frequently reported characteristics of NPs such as size and the agglomeration state can influence the level and the mechanism of NP cellular internalization.We employed fluorescently-labelled 30 and 80 nm silicon dioxide NPs, both in agglomerated and non-agglomerated form. Using flow cytometry, transmission electron microscopy, the inhibitors of endocytosis and gene silencing we determined the most probable routes of cellular uptake for each form of tested silica NPs. We observed differences in cellular uptake depending on the size and the agglomeration state of NPs. Caveolae-mediated endocytosis was implicated particularly in the internalisation of well dispersed silica NPs but with an increase of the agglomeration state of NPs a combination of endocytic pathways with a predominant role of macropinocytosis was noted.We demonstrated that the agglomeration state of NPs is an important factor influencing the level of cell uptake and the mechanism of endocytosis of silica NPs.

| S-EPMC5485545 | biostudies-other

De-agglomeration Effect of the US Pharmacopeia and Alberta Throats on Carrier-Based Powders in Commercial Inhalation Products.

Project description:The US pharmacopeia (USP) and Alberta throats were recently reported to cause further de-agglomeration of carrier-free powders emitted from some dry powder inhalers (DPIs). This study assessed if they have similar influences on commercially available carrier-based DPIs. A straight tube, a USP throat, and an Alberta throat (non-coated and coated) were used for cascade impaction testing. Aerosol fine particle fraction (FPF ≤ 5 μm) was computed to evaluate throat-induced de-agglomeration. Computational fluid dynamics are employed to simulate airflow patterns and particle trajectories inside the USP and Alberta throats. For all tested products, no significant differences in the in vitro aerosol performance were observed between the USP throat and the straight tube. Using fine lactose carriers (<10 μm), Symbicort(®) and Oxis(™) showed minimal impaction inside the Alberta throat and resulted in similar FPF among all induction ports. For products using coarse lactose carriers (>10 μm), impaction frequency and energy inside the Alberta throat were significant. Further de-agglomeration was noted inside the non-coated Alberta throat for Seretide(®) and Spiriva(®), but agglomerates emitted from Relenza(®), Ventolin(®), and Foradil(®) did not further break up into smaller fractions. The coated Alberta throat considerably reduced the FPF values of these products due to the high throat retention, but they generally agreed better with the in vivo data. In conclusion, depending on the powder formulation (including carrier particle size), the inhaler, and the induction port, further de-agglomeration could happen ex-inhaler and create differences in the in vitro measurements.

| S-EPMC4627448 | biostudies-literature

Stator Dynamics Depending on Sodium Concentration in Sodium-Driven Bacterial Flagellar Motors.

Project description:Bacterial flagellar motor (BFM) is a large membrane-spanning molecular rotary machine for swimming motility. Torque is generated by the interaction between the rotor and multiple stator units powered by ion-motive force (IMF). The number of bound stator units is dynamically changed in response to the external load and the IMF. However, the detailed dynamics of stator unit exchange process remains unclear. Here, we directly measured the speed changes of sodium-driven chimeric BFMs under fast perfusion of different sodium concentration conditions using computer-controlled, high-throughput microfluidic devices. We found the sodium-driven chimeric BFMs maintained constant speed over a wide range of sodium concentrations by adjusting stator units in compensation to the sodium-motive force (SMF) changes. The BFM has the maximum number of stator units and is most stable at 5 mM sodium concentration rather than higher sodium concentration. Upon rapid exchange from high to low sodium concentration, the number of functional stator units shows a rapidly excessive reduction and then resurrection that is different from predictions of simple absorption model. This may imply the existence of a metastable hidden state of the stator unit during the sudden loss of sodium ions.

| S-EPMC8661058 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data