Cell behavior on silica-hydroxyapatite coaxial composite.
Ontology highlight
ABSTRACT:
SUBMITTER: Garibay-Alvarado JA
PROVIDER: S-EPMC8112647 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Bone grafting is one of the commonest surgical procedures, yet all bone substitutes developed so far suffer from specific weaknesses and the search for a bone graft material with ideal physical and biological properties is still ongoing. Calcium phosphate pastes are the most frequently used synthetic bone grafts, yet they (a) often take an impractically long time to set, (b) release the drug content too fast, and (c) do not form pores large enough to accommodate host cells and foster osseointegration. To make up for these deficiencies, we introduced gelatin and silica to pastes composed of 5-15 nm sized hydroxyapatite nanoparticles and yielded a bioresorbable composite that is compact, yet flowing upon injection; that prevents setting at room temperature, but sets promptly, in minutes, at 37 °C; that displays an increase in surface porosity following immersion in physiological fluids; that allows for sustained release of antibiotics; and that sets in a tunable manner and in clinically relevant time windows: 1-3 minutes at its fastest. Timelapse, in situ X-ray diffraction analysis demonstrated that the setting process is accompanied by an increase in crystallinity of the initially amorphous hydroxyapatite, involving no polymorphic phase transitions in its course. Setting time can be tuned by controlling the weight content of gelatin or powder-to-liquid ratio. The release of vancomycin was slow, ~ 8 % after 2 weeks, and unaffected by the gelatin content. While vancomycin-loaded pastes were effective in reducing the concentration of all bacterial species analyzed, the bacteriostatic effects of the antibiotic-free pastes were pronounced against S. liquefaciens and E. coli. S. liquefaciens bacilli underwent beading and filamentation during the treatment, suggesting that the antimicrobial effects are attributable to cell wall disruption by hydroxyapatite nanoparticles. Vancomycin-loaded pastes augmented the activity of the antibiotic against P. aeruginosa and S. liquefaciens, while exhibiting no negative effects against human mesenchymal stem cells. They were also uptaken three times more abundantly than pure hydroxyapatite, indicating the theoretical favorability of their use for intracellular delivery of therapeutics. This selectivity, toxic for bacteria and harmless for primary stem cells, is promising for application as bone grafts for osteomyelitis.
| S-EPMC5667689 | biostudies-literature
Project description:Lev/MSNs/n-HA/PU has been proved to be a novel scaffold material to treat bone defect caused by chronic osteomyelitis. We have previously identified that this material can effectively treat chronic osteomyelitis caused by Staphylococcus aureus in vivo. However, the potential mechanisms of antibacterial and osteogenic induction properties remain unclear. Thus, for osteogenesis property, immunohistochemistry, PCR, and Western blot were performed to detect the expression of osteogenic markers. Furthermore, flow cytometry and TUNEL were applied to analyze MC3T3-E1 proliferation and apoptosis. For antibacterial property, the material was co-cultivated with bacteria, bacterial colony forming units was counted and the release time of the effective levofloxacin was assayed by agar disc-diffusion test. Moreover, scanning electron microscope was applied to observe adhesion of bacteria. In terms of osteogenic induction, we found BMSCs adherently grew more prominently on Lev/MSNs/n-HA/PU. Lev/MSNs/n-HA/PU also enhanced the expression of osteogenic markers including OCN and COL1α1, as well as effectively promoted the transition from G1 phase to G2 phase. Furthermore, Lev/MSNs/n-HA/PU could reduce apoptosis of MC3T3-E1. Besides, both Lev/MSNs/n-HA/PU and n-HA/PU materials could inhibit bacterial colonies, while Lev/MSNs/n-HA/PU possessed a stronger antibacterial activities, and lower bacterial adhesion than n-HA/PU. These results illustrated that Lev/MSNs/n-HA/PU composite scaffold possess favorable compatibility in vitro, which induce osteogenic differentiation of MSCs, promote proliferation and differentiation of MC3T3-E1, and inhibit apoptosis. Moreover, clear in vitro antibacterial effect of Lev/MSNs/n-HA/PU was also observed. In summary, this study replenishes the potential of Lev/MSNs/n-HA/PU composite scaffold possess dual functions of anti-infection and enhanced osteogenesis for future clinical application.
| S-EPMC8099691 | biostudies-literature
Project description:Polymeric composite microspheres consisting of a poly(D,L-lactic-co-glycolic acid) (PLGA) core surrounded by a poly(D,L-lactic acid) (PDLLA) shell layer were successfully fabricated by coaxial electrohydrodynamic atomization (CEHDA) process. Process conditions, including nozzle voltage and polymer solution flow rates, as well as solution parameters, such as polymer concentrations, were investigated to ensure the formation of composite microspheres with a doxorubicin-loaded PLGA core surrounded by a relatively drug-free PDLLA shell layer. Various microsphere formulations were fabricated and characterized in terms of their drug distribution, encapsulation efficiency and in vitro release. Numerical simulation of CEHDA process was performed based on a computational fluid dynamics (CFD) model in Fluent by employing the process conditions and fluid properties used in the experiments. The simulation results were compared with the experimental work to illustrate the capability of the CFD model to predict the production of consistent compound droplets, and hence, the expected core-shell structured microspheres.
| S-EPMC3859445 | biostudies-literature
Project description:Breast microcalcifications are routinely explored for mammographic detection of breast cancer and are primarily composed of non-stoichiometric hydroxyapatite (Ca10-x(PO4)6-x(CO3)x(OH)2-x) (HA). Interestingly, HA morphology and carbonate substitution vary in malignant vs. benign lesions. However, whether or not these changes (i) are functionally linked and (ii) impact malignancy remains unclear due in part to lack of model systems that permit evaluating these possibilities. Here, we have adapted a 96 well-based mineralized culture platform to investigate breast cancer cell behavior in response to systematic changes in the chemical and physical properties of HA. By adjusting the carbonate content of the simulated body fluid (SBF) solutions used during growth, we can control the morphology and carbonate substitution of the deposited HA. Our results suggest that both the combined and individual effects of these differences alter breast cancer cell growth and secretion of tumorigenic interleukin-8 (IL-8). Consequently, changes in both HA carbonate incorporation and morphology impact the behavior of breast cancer cells. Collectively, our data underline the importance of biomineralized culture platforms to evaluate the functional contribution of HA material properties to the pathogenesis of breast cancer.Statement of significanceBreast microcalcifications are small mineral deposits primarily composed of hydroxyapatite (HA). HA physicochemical properties have been of considerable interest, as these are often altered during breast cancer progression and linked to malignancy. However, the functional relationship between these changes and malignancy remains unclear due in part to lack of model systems. Here, we have adapted a previously developed a 96 well-based culture platform to evaluate breast cancer cell behavior in response to systematic changes in HA properties. Our results demonstrate that changes in HA morphology and carbonate content influence breast cancer cell growth and interleukin-8 secretion, and suggest that characterizing the effect of HA properties on breast cancer cells may improve our understanding of breast cancer development and progression.
| S-EPMC4560646 | biostudies-literature
Project description:Citric acid-based polymer/hydroxyapatite composites (CABP-HAs) are a novel class of biomimetic composites that have recently attracted significant attention in tissue engineering. The objective of this study was to compare the efficacy of using two different CABP-HAs, poly (1,8-octanediol citrate)-click-HA (POC-Click-HA) and crosslinked urethane-doped polyester-HA (CUPE-HA) as an alternative to autologous tissue grafts in the repair of skeletal defects. CABP-HA disc-shaped scaffolds (65 wt.-% HA with 70% porosity) were used as bare implants without the addition of growth factors or cells to renovate 4 mm diameter rat calvarial defects (n = 72, n = 18 per group). Defects were either left empty (negative control group), or treated with CUPE-HA scaffolds, POC-Click-HA scaffolds, or autologous bone grafts (AB group). Radiological and histological data showed a significant enhancement of osteogenesis in defects treated with CUPE-HA scaffolds when compared to POC-Click-HA scaffolds. Both, POC-Click-HA and CUPE-HA scaffolds, resulted in enhanced bone mineral density, trabecular thickness, and angiogenesis when compared to the control groups at 1, 3, and 6 months post-trauma. These results show the potential of CABP-HA bare implants as biocompatible, osteogenic, and off-shelf-available options in the repair of orthopedic defects.
| S-EPMC4220725 | biostudies-literature
Project description:Porous hollow spherical and rod-like silica nanoparticles were obtained via a surfactant templating method adopting hydroxyapatite (HAp) nanoparticles as an etchable core material.
| S-EPMC6219700 | biostudies-literature
Project description:This work reports the synthesis of coaxial carbon@NiMoO4 nanofibers for supercapacitor electrode applications. Thin NiMoO4 nanosheets are uniformly coated on the conductive electrospun carbon nanofibers by a microwave assisted hydrothermal method to form a hierarchical structure, which increases the porosity as well as the conductivity of the electrode. The thickness of the NiMoO4 can be easily adjusted by varying the precursor concentrations. The high specific surface area (over 280 m2 g-1) and conductive carbon nanofiber backbone increase the utilization of the active pseudocapacitive NiMoO4 phase, resulting a high specific capacitance of 1840 F g-1.
| S-EPMC9086301 | biostudies-literature
Project description:BackgroundImplant loosening is associated with inflammatory bone loss induced by ultra-high molecular weight polyethylene wear debris. We hypothesized that a hydroxyapatite-bisphosphonate composite improves periprosthetic bone quality and osseous integration of an intramedullary implant even in the presence of ultra-high molecular weight polyethylene particles in an experimental rat femur model.MethodsA preliminary in vitro study determined the optimal concentration of zoledronate (50 microM) that would maximally decrease osteoclasts without harming osteoblasts. Hydroxyapatite-coated intramedullary nails were implanted bilaterally in the femora of sixteen rats (the control group), and hydroxyapatite-zoledronate-coated nails were implanted bilaterally in the femora of sixteen rats (the experimental group). Ultra-high molecular weight polyethylene particles were introduced into the femoral canal before implantation. Eight rats from each group were killed at six weeks, and the remaining rats were killed at six months. Periprosthetic bone mass was analyzed by dual x-ray absorptiometry and microcomputed tomography. Osseous integration was examined by biomechanical testing of pullout strength.ResultsThe mean bone area (and standard deviation) in the periprosthetic bone region was significantly greater (p < 0.0001) in the hydroxyapatite-zoledronate group (2.388 +/- 0.960 mm2) than in the control group (0.933 +/- 0.571 mm2). This difference was larger in the six-week group than in the six-month group (p = 0.03). The average peak pullout force for the treated femora (241.0 +/- 95.1 N) was significantly greater (p < 0.0001) than that for the controls (55.6 +/- 49.0 N). This difference was similar in the six-week and six-month groups. The energy required for nail pullout was significantly greater (p < 0.0001) for the treated femora (521.6 +/- 293.8 N-mm) than for the controls (142.2 +/- 152.1 N-mm). This difference in energy to pullout was similar in the six-week and six-month groups. Regression analysis demonstrated a high correlation between periprosthetic bone mass and peak pullout force for both the six-week (r = 0.766, p = 0.0005) and six-month (r = 0.838, p < 0.0001) groups.ConclusionsSurface modification of implants with hydroxyapatite-zoledronate improves periprosthetic bone quality and osseous integration.Clinical relevanceHydroxyapatite-based site-specific delivery of bisphosphonates may be one way of reducing ultra-high molecular weight polyethylene wear particle-induced periprosthetic osteolysis and implant loosening.
| S-EPMC2657477 | biostudies-literature
Project description:Bone is one of the most common sites of cancer metastasis, as its fertile microenvironment attracts tumor cells. The unique mechanical properties of bone extracellular matrix (ECM), mainly composed of hydroxyapatite (HA) affect a number of cellular responses in the tumor microenvironment (TME) such as proliferation, migration, viability, and morphology, as well as angiogenic activity, which is related to bone metastasis. In this study, we engineered a bone-mimetic microenvironment to investigate the interactions between the TME and HA using a microfluidic platform designed for culturing tumor cells in 3D bone-mimetic composite of HA and fibrin. We developed a bone metastasis TME model from colorectal cancer (SW620) and gastric cancer (MKN74) cells, which has very poor prognosis but rarely been investigated. The microfluidic platform enabled straightforward formation of 3D TME composed the hydrogel and multiple cell types. This facilitated monitoring of the effect of HA concentration and culture time on the TME. In 3D bone mimicking culture, we found that HA rich microenvironment affects cell viability, proliferation and cancer cell cytoplasmic volume in a manner dependent on the different metastatic cancer cell types and culture duration indicating the spatial heterogeneity (different origin of metastatic cancer) and temporal heterogeneity (growth time of cancer) of TME. We also found that both SW620 and MKN72 cells exhibited significantly reduced migration at higher HA concentration in our platform indicating inhibitory effect of HA in both cancer cells migration. Next, we quantitatively analyzed angiogenic sprouts induced by paracrine factors that secreted by TME and showed paracrine signals from tumor and stromal cell with a high HA concentration resulted in the formation of fewer sprouts. Finally we reconstituted vascularized TME allowing direct interaction between angiogenic sprouts and tumor-stroma microspheroids in a bone-mimicking microenvironment composing a tunable HA/fibrin composite. Our multifarious approach could be applied to drug screening and mechanistic studies of the metastasis, growth, and progression of bone tumors.
| S-EPMC6653063 | biostudies-literature
Project description:Biofabrication has been adapted in engineering patient-specific biosynthetic grafts for bone regeneration. Herein, we developed a three-dimensional (3D) high-resolution, room-temperature printing approach to fabricate osteoconductive scaffolds using calcium phosphate cement (CPC). The non-aqueous CPC bioinks were composed of tetracalcium phosphate, dicalcium phosphate anhydrous, and Polyvinyl butyral (PVB) dissolved in either ethanol (EtOH) or tetrahydrofuran (THF). They were printed in an aqueous sodium phosphate bath, which performs as a hardening accelerator for hydroxyapatite formation and as a retainer for 3D microstructure. The PVB solvents, EtOH or THF, affected differently the slurry rheological properties, scaffold microstructure, mechanical properties, and osteoconductivity. Our proposed approach overcomes limitations of conventional fabrication methods, which require high-temperature (>50 °C), low-resolution (>400 μm) printing with an inadequate amount of large ceramic particles (>35 μm). This proof-of-concept study opens venues in engineering high-resolution, implantable, and osteoconductive scaffolds with predetermined properties for bone regeneration.
| S-EPMC8164647 | biostudies-literature