Evaluation of the miniplate-anchored Forsus Fatigue Resistant Device in skeletal Class II growing subjects: A randomized controlled trial.
Ontology highlight
ABSTRACT: Objectives
To evaluate the use of direct miniplate anchorage in conjunction with the Forsus Fatigue Resistant Device (FFRD) in treatment of skeletal Class II malocclusion.Materials and methods
Forty-eight females with skeletal Class II were randomly allocated to the Forsus plus miniplates (FMP) group (16 patients, age 12.5 ± 0.9 years), Forsus alone (FFRD; 16 patients, age 12.1 ± 0.9 years), or the untreated control group (16 subjects, age 12.1 ± 0.9 years). After leveling and alignment, miniplates were inserted in the mandibular symphysis in the FMP group. The FFRD was inserted directly on the miniplates in the FMP group and onto the mandibular archwires in the FFRD group. The appliances were removed after reaching an edge-to-edge incisor relationship.Results
Data from 46 subjects were analyzed. The effective mandibular length significantly increased in the FMP group only (4.05 ± 0.78). The mandibular incisors showed a significant proclination in the FFRD group (9.17 ± 2.42) and a nonsignificant retroclination in the FMP group (-1.49 ± 4.70). The failure rate of the miniplates was reported to be 13.3%.Conclusions
The use of miniplates with the FFRD was successful in increasing the effective mandibular length in Class II malocclusion subjects in the short term. The miniplate-anchored FFRD eliminated the unfavorable mandibular incisor proclination in contrast to the conventional FFRD.
SUBMITTER: Elkordy SA
PROVIDER: S-EPMC8117684 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Bone-anchored maxillary protraction (BAMP) is effective for skeletal Class III malocclusion. However, infection, screw and plate loosening, and device failures occur with conventional plates. This pilot prospective study analyzed the feasibility of individualized BAMP using preoperative simulation and 3D titanium printing in patients referred by the orthodontic department for four BAMP miniplates. Preoperative cone beam computed tomography data were analyzed using CAD/CAM software to fabricate the individualized 3D-printed BAMP device. The customized plates were printed using selective laser sintering and inserted onto the bone through an adjunct transfer jig. The accuracy of preoperative simulation and actual placement of the BAMP device were tested by superimposing simulated positioned digital images and postoperative computed tomography data. The growth modification effect depended on superimposition of lateral cephalograms and comparative changes in SNA, SNB, ANB, and Wits. Two male patients were finally included in the study. BAMP decreased the ANB difference (-4.56 to -1.09) and Wits appraisal (-7.52 to -3.26) after 2 years. Normal measurement indices for sagittal and vertical growth indicated successful growth modification. The mean accuracy between preoperative simulation and actual surgery was 0.1081 ± 0.5074 mm. This treatment modality involving preoperative simulation and 3D titanium printing for fabricating and placing customized BAMP devices precisely at planned locations is effective for treating skeletal Class III malocclusion.
| S-EPMC8619151 | biostudies-literature
Project description:ObjectivesTo establish the three-dimensional facial soft tissue morphology of adolescent and adult females in the Guangdong population and to study the morphological characteristics of hyperdivergent skeletal class II females in Guangdong compared with that of normodivergent class I groups.Materials and methodsThe 3dMDface system was used to capture face scans of 160 patients, including 45 normal and 35 hyperdivergent skeletal class II adolescents (aged 11-14 years old) and 45 normal and 35 hyperdivergent skeletal class II adults (aged 18-30 years old). Thirty-two soft tissue landmarks were mapped, and 21 linear, 10 angular and 17 ratio measurements were obtained by 3dMDvultus analysis software. Data were assessed with a t-test of two independent samples between the normal adolescent and adult groups and between the normal and hyperdivergent skeletal class II groups.ResultsThe linear measurements of the Guangdong adult females were larger than those of the adolescents in both Class I and Class II groups. However, the angular and ratio measurements had no significant difference. The vertical linear measurements were higher and the sagittal and transverse linear measurements were smaller in the hyperdivergent class II group (p < 0.05). The soft tissue ANB angle, chin-lip angle, and mandibular angle were significantly larger and the soft tissue facial convexity angle and nasal convexity angle were significantly smaller in the hyperdivergent class II group (p < 0.05). Additionally, there were significant differences in the ratio measurements between the hyperdivergent class II groups and the control groups (p < 0.05).ConclusionsThe three-dimensional facial morphology of Guangdong adolescent and adult females was acquired. The facial soft tissue measurements of the adults were higher in the three dimensions except for the facial convexity and proportional relationships which were similar, suggesting that the growth pattern remained the same. The three-dimensional facial soft tissue features of hyperdivergent skeletal class II were characterized by the terms "long, convex, and narrow". Three-dimensional facial measurements can reflect intrinsic hard tissue characteristics.
| S-EPMC8966193 | biostudies-literature
Project description:Treatment effects occurring during Class II malocclusion treatment with the clear aligner mandibular advancement protocol were evaluated in two growing patients: one male (12 years, 3 months) and one female (11 years, 9 months). Both patients presented with full cusp Class II molar and canine relationships. Intraoral scans and cone-beam computed tomography were acquired before treatment and after mandibular advancement. Three-dimensional skeletal and dental long-axis changes were quantified, in which the dental long axis was determined by registering the dental crowns obtained from intraoral scans to the root canals in cone-beam computed tomography scans obtained at the same time points. Class II correction was achieved by a combination of mandibular skeletal and dental changes. A similar direction of skeletal and dental changes was observed in both patients, with downward and forward displacement of the mandible resulting from the growth of the mandibular condyle and ramus. Dental changes in both patients included mesialization of the mandibular posterior teeth with flaring of mandibular anterior teeth. In these two patients, clear aligner mandibular advancement was an effective treatment modality for Class II malocclusion correction with skeletal and dental effects and facial profile improvement.
| S-EPMC10454533 | biostudies-literature
Project description:BackgroundThe evaluation of the facial profile of skeletal Class II patients with camouflage treatment is of great importance for patients and orthodontists. The aim of this study is to explore the key factors in evaluating the facial profile esthetics and to predict the posttreatment facial profile esthetics of skeletal Class II extraction patients.Methods124 skeletal Class II extraction patients were included. The pretreatment and posttreatment cephalograms were analyzed by a trained expert orthodontist. The facial profile esthetics of pretreatment and posttreatment lateral photographs were evaluated by 10 expert orthodontists using the visual analog scale (VAS). The correlation between subjective facial profile esthetics and objective cephalometric measurements was assessed. Three machine-learning methods were used to predict posttreatment facial profile esthetics.ResultsThe distances from lower and upper lip to the E plane and U1-APo showed the stronger correlation with profile esthetics. The changes in lower lip to the E plane and U1-APo during extraction exhibited the stronger correlation with changes in VAS score (r = - 0.551 and r = - 0.469). The random forest prediction model had the lowest mean absolute error and root mean square error, demonstrating a better prediction accuracy and fitting effect. In this model, pretreatment upper lip to E plane, pretreatment Pog-NB and the change of U1-GAll were the most important variables in predicting the posttreatment score of facial profile esthetics.ConclusionsThe maxillary incisor protrusion and lower lip protrusion are key objective indicators for evaluating and predicting facial profile esthetics of skeletal Class II extraction patients. An artificial intelligence prediction model could be a new method for predicting the posttreatment esthetics of facial profiles.
| S-EPMC10694895 | biostudies-literature
Project description:The purpose of this cross-sectional research was to explore the relationship of the mandibular dental and basal bone archforms between severe Skeletal Class II (SC2) and Skeletal Class III (SC3) malocclusions. We also compared intercanine and intermolar widths in these two malocclusion types. Thirty-three virtual pretreatment mandibular models (Skeletal Class III group) and Thirty-five Skeletal Class II group pretreatment models were created with a laser scanning system. FA (the midpoint of the facial axis of the clinical crown)and WALA points (the most prominent point on the soft-tissue ridge)were employed to produce dental and basal bone archforms, respectively. Gained scatter diagrams of the samples were processed by nonlinear regression analysis via SPSS 17.0. The mandibular dental and basal bone intercanine and intermolar widths were significantly greater in the Skeletal Class III group compared to the Skeletal Class II group. In both groups, a moderate correlation existed between dental and basal bone arch widths in the canine region, and a high correlation existed between dental and basal bone arch widths in the molar region. The coefficient of correlation of the Skeletal Class III group was greater than the Skeletal Class II group. Fourth degree, even order power functions were used as best-fit functions to fit the scatter plots. The radius of curvature was larger in Skeletal Class III malocclusions compared to Skeletal Class II malocclusions (rWALA3>rWALA2>rFA3>rFA2). In conclusion, mandibular dental and basal intercanine and intermolar widths were significantly different between the two groups. Compared with Skeletal Class II subjects, the mandibular archform was more flat for Skeletal Class III subjects.
| S-EPMC4074102 | biostudies-literature
Project description:Background/aimsThe Anopress device is a new portable manometry system. The aim of this study is to formulate normative data using this new device by recording the anorectal function of asymptomatic subjects. Patient comfort was also assessed.MethodsAnorectal function was assessed in asymptomatic volunteers using the Anopress. All volunteers were examined in a standardized way in accordance with the study protocol. Normative values for the Anopress were obtained from the recorded data and patient comfort was assessed using a visual analogue scale.ResultsWe recruited 153 healthy volunteers. Eighty were female (23 parous; median age 39.5 [interquartile range {IQR}, 28.75-53.00]) and 73 were male (median age 40.5 [IQR, 29.00-52.25]). For the female cohort, the following normal range (2.5-97.5 percentile) values were recorded across the whole anal canal: resting pressure 40.0-103.0 mmHg; squeeze increment 35.0-140.6 mmHg; endurance 1.3-9.0 seconds; involuntary squeeze 41.1-120.8 mmHg; and strain pressure 22.1-77.9 mmHg. Similarly, the following male normal range (2.5-97.5 percentile) values were recorded across the whole anal canal: resting pressure 38.3-99.6 mmHg; squeeze increment 42.5-154.8 mmHg; involuntary squeeze 40.0-123.6 mmHg; endurance 2.0-10.0 seconds; and strain pressure 11.0-72.1 mmHg. The median visual analogue scale scores for discomfort during the measurement was 0.0 (IQR, 0.00-0.00).ConclusionsNormative values for the Anopress device have been calculated by this study. The Anopress appears to be a safe and well tolerated way of measuring pressures from the entire anal canal. Further comparisons with other standard and commonly used manometry tests are, however, required to verify its reliability.
| S-EPMC6034678 | biostudies-literature
Project description:Rationale: Ferroptosis is a regulated process of cell death caused by iron-dependent accumulation of lipid hydroperoxides (LPO). It is sensitive to epithelial-to-mesenchymal transition (EMT) cells, a well-known therapy-resistant state of cancer. Previous studies on nanomaterials did not investigate the immense value of ferroptosis therapy (FT) in epithelial cell carcinoma during EMT. Herein, we describe an EMT-specific nanodevice for a comprehensive FT strategy involving LPO burst. Methods: Mitochondrial membrane anchored oxidation/reduction response and Fenton-Reaction-Accelerable magnetic nanophotosensitizer complex self-assemblies loading sorafenib (CSO-SS-Cy7-Hex/SPION/Srfn) were constructed in this study for LPO produced to overcome the therapy-resistant state of cancer. Both in vitro and in vivo experiments were performed using breast cancer cells to investigate the anti-tumor efficacy of the complex self-assemblies. Results: The nano-device enriched the tumor sites by magnetic targeting of enhanced permeability and retention effects (EPR), which were disassembled by the redox response under high levels of ROS and GSH in FT cells. Superparamagnetic iron oxide nanoparticles (SPION) released Fe2+ and Fe3+ in the acidic environment of lysosomes, and the NIR photosensitizer Cy7-Hex anchored to the mitochondrial membrane, combined sorafenib (Srfn) leading to LPO burst, which was accumulated ~18-fold of treatment group in breast cancer cells. In vivo pharmacodynamic test results showed that this nanodevice with small particle size and high cytotoxicity increased Srfn circulation and shortened the period of epithelial cancer treatment. Conclusion: Ferroptosis therapy had a successful effect on EMT cells. These findings have great potential in the treatment of therapy-resistant epithelial cell carcinomas.
| S-EPMC6735518 | biostudies-literature
Project description:Objective The aim of this article is to analyze and compare the presence of single-nucleotide polymorphisms (SNPs) of COL1A1 and FGFR2 in class II and class III Javanese populations.Materials and methods Cephalometric radiographs from total 63 patients of class II and III were analyzed. SNP analysis was performed based on both COL1A1 and FGFR2 sequences amplified from total DNA of patients' fresh blood. Principal component analysis was done to calculate the data and find the correlation of the cephalometric indicators influenced by each mutation. t-test and Mann-Whitney analysis were performed to check the significance of differences occurred in each studied parameter (p < 0.05).Result There were three COL1A1 SNPs found in class II and only two in class III, while three FGFR2 SNPs found in both classes. Class II phenotype seemed to be strongly influenced by Y-axis and mandibular plane angle, while class III by lower gonial angle and mandibular plane angle.Conclusion Based on this study, we suggest that rs2249492 of COL1A1 and rs2981582 of FGFR2 play important roles in class III, while rs2277632 of COL1A1 and rs2981582 of FGFR2 play important role in class II skeletal malocclusion in Javanese population.
| S-EPMC9949934 | biostudies-literature
Project description:ObjectivesThe AspireAssist System (AspireAssist) is an endoscopic weight loss device that is comprised of an endoscopically placed percutaneous gastrostomy tube and an external device to facilitate drainage of about 30% of the calories consumed in a meal, in conjunction with lifestyle (diet and exercise) counseling.MethodsIn this 52-week clinical trial, 207 participants with a body-mass index (BMI) of 35.0-55.0 kg/m2 were randomly assigned in a 2:1 ratio to treatment with AspireAssist plus Lifestyle Counseling (n=137; mean BMI was 42.2±5.1 kg/m2) or Lifestyle Counseling alone (n=70; mean BMI was 40.9±3.9 kg/m2). The co-primary end points were mean percent excess weight loss and the proportion of participants who achieved at least a 25% excess weight loss.ResultsAt 52 weeks, participants in the AspireAssist group, on a modified intent-to-treat basis, had lost a mean (±s.d.) of 31.5±26.7% of their excess body weight (12.1±9.6% total body weight), whereas those in the Lifestyle Counseling group had lost a mean of 9.8±15.5% of their excess body weight (3.5±6.0% total body weight) (P<0.001). A total of 58.6% of participants in the AspireAssist group and 15.3% of participants in the Lifestyle Counseling group lost at least 25% of their excess body weight (P<0.001). The most frequently reported adverse events were abdominal pain and discomfort in the perioperative period and peristomal granulation tissue and peristomal irritation in the postoperative period. Serious adverse events were reported in 3.6% of participants in the AspireAssist group.ConclusionsThe AspireAssist System was associated with greater weight loss than Lifestyle Counseling alone.
| S-EPMC5350543 | biostudies-literature
Project description:The aim of this pilot randomized controlled trial (RCT) was to evaluate the sagittal mandibular response induced by rapid maxillary expansion (RME) therapy in mixed dentition patients with class II malocclusion, comparing the effects of bonded RME and banded RME with a matched untreated class II control group.This RCT was designed in parallel with an allocation ratio of 1:1:1. The sample consisted of 30 children with a mean age of 8.1 ± 0.6 years who were randomly assigned to three groups: group 1 treated with bonded RME, group 2 treated with banded RME, and group 3 the untreated control group. All patients met the following inclusion criteria: early mixed dentition, class II molar relationship, transverse discrepancy ??4 mm, overjet ??5 mm, and prepubertal skeletal maturity stage (CS1-CS2). The expansion screw was activated one quarter of a turn per day (0.25 mm) until overcorrection was reached. For each subject, lateral cephalograms and plaster casts were obtained before treatment (T1) and after 1 year (T2). A randomization list was created for the group assignment, with an allocation ratio of 1:1:1. The observer who performed all the measurements was blinded to group assignment. The study was single-blinded in regard to statistical analysis.RME was effective in the correction of maxillary deficiency. Class II patients treated with both types of RME showed no significant improvement of the anteroposterior relationship of the maxilla and the mandible at both skeletal and occlusal levels. The acrylic splint RME had significant effects on reducing the skeletal vertical dimension and the gonial angle.The orthopedic expansion did not affect the sagittal relationship of class II patients treated in the early mixed dentition when compared with the untreated control group. Additional studies with a larger sample are warranted to elucidate individual variations in dento-skeletal mandibular response to the maxillary expansion protocol in class-II-growing patients.ClinicalTrials.gov NCT03159962 .
| S-EPMC5673058 | biostudies-literature