Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Refinery wastewater treatment via a multistage enhanced biochemical process.

ABSTRACT: Petroleum refinery wastewater (PRWW) that contains recalcitrant components as the major portion of constituents is difficult to treat by conventional biological processes. An effective and economical biological treatment process was established to treat industrial PRWW with an influent COD of over 2500 mg L^-1 in this research. This process is mainly composed of internal circulation biological aerated filter (ICBAF), hydrolysis acidfication (HA), two anaerobic-aerobic (A/O) units, a membrane biological reactor (MBR), and ozone-activated carbon (O₃-AC) units. The results showed that, overall, this system removed over 94% of the COD, BOD_5, ammonia nitrogen (NH₄⁺-N) and phosphorus in the influent, with the ICBAF unit accounting for 54.6% of COD removal and 83.6% of BOD₅ removal, and the two A/O units accounting for 33.3% of COD removal and 9.4% of BOD₅ removal. The degradation processes of eight organic pollutants and their removal via treatment were also analyzed. Furthermore, 26 bacteria were identified in this system, with Proteobacteria and Acidobacteria being the most dominant. Ultimately, the treatment process exhibited good performance in degrading complex organic pollutants in the PRWW.

SUBMITTER: Wang C

PROVIDER: S-EPMC8119716 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Adsorption-Enhanced Ceramic Membrane Filtration Using Fenton Oxidation for Advanced Treatment of Refinery Wastewater: Treatment Efficiency and Membrane-Fouling Control.

Project description:With the development of the refining industry, the treatment of refinery wastewater has become an urgent problem. In this study, a ceramic membrane (CM) was combined with Fenton-activated carbon (AC) adsorption to dispose of refinery wastewater. The effect of the combined process was analyzed using excitation-emission matrix (EEM), ultraviolet-visible (UV-vis) and Fourier transform infrared spectroscopies (FTIR). Compared with direct filtration, the combined process could significantly improve the removal of organic pollution, where the removal rate of the COD and TOC could be 70% and the turbidity removal rate was above 97%. It was found that the effluent could meet the local standards. In this study, the membrane fouling was analyzed for the impact of the pretreatment on the membrane direction. The results showed that Fenton-AC absorption could effectively alleviate membrane fouling. The optimal critical flux of the combined process was increased from 60 to 82 L/(m2·h) compared with direct filtration. After running for about 20 d, the flux remained at about 55 L/(m2·h) and the membrane-fouling resistance was only 1.2 × 1012 m-1. The Hermia model revealed that cake filtration was present in the early stages of the combined process. These results could be of great use in improving the treatment efficiency and operation cycle of refinery wastewater.

| S-EPMC8467550 | biostudies-literature

Desulfurization wastewater treatment process

Project description:Desulfurization wastewater treatment process Raw sequence reads

| PRJNA687878 | ENA

Detoxification of wastewater treatment plant effluents by enhanced soil aquifer treatment

Project description:Soil Aquifer Treatment (SAT) is recognized as a cost-effective approach to reduce contaminants of emerging concern (CECs) from Wastewater Treatment Plant (WWTP) effluents. However, its efficiency in removing the associated biological effects is still poorly understood. Here, we evaluated the efficiency of three pilot SAT systems, two of them enhanced with reactive barriers containing different proportions of sand and organic materials, in removing toxicity associated to CECs. SATs were fed with secondary effluents from the Palamós WWTP (N.E. Spain) during two consecutive campaigns scheduled before and after the summer of 2020. Fifteen water samples were collected from the WWTP effluent, below the barriers and 15 m into the aquifer. Transcriptomic analyses of zebrafish embryos exposed to the corresponding water extracts revealed a wide range of toxic activities in the WWTP effluents. Results demonstrated that the associated responses were reduced by more than 70% by SAT, achieving control levels in some cases. Similar results were obtained when human HepG2 hepatic cells were tested for cytotoxic and dioxin-like responses. Toxicity reduction appeared to be partially determined by the reactive barrier composition and/or SAT managing and was correlated with the removal of CECs by SAT. In conclusion, SAT appears to be a very promising approach for efficiently reducing the effects of recalcitrant pollutants from WWTP secondary effluents on the environment and human health.

2024-11-01 | GSE240250 | GEO

Potential of Indigenous Strains Isolated from the Wastewater Treatment Plant of a Crude Oil Refinery.

Project description:Contamination of the environment with crude oil or other fuels is an enormous disaster for all organisms. The microbial communities for bioremediation have been an effective tool for eliminating pollution. This study aimed to determine individual cultures' and a strain mixture's ability to utilize alkanes (single alkanes and crude oil). The proper study of pure cultures is necessary to design synergistically working consortia. The Acinetobacter venetianus ICP1 and Pseudomonas oleovorans ICTN13 strains isolated from a wastewater treatment plant of a crude oil refinery can grow in media containing various aromatic and aliphatic hydrocarbons. The genome of the strain ICP1 contains four genes encoding alkane hydroxylases, whose transcription depended on the length of the alkane in the media. We observed that the hydrophobic cells of the strain ICP1 adhered to hydrophobic substrates, and their biofilm formation increased the bioavailability and biodegradation of the hydrocarbons. Although strain ICTN13 also has one alkane hydroxylase-encoding gene, the growth of the strain in a minimal medium containing alkanes was weak. Importantly, the growth of the mixture of strains in the crude oil-containing medium was enhanced compared with that of the single strains, probably due to the specialization in the degradation of different hydrocarbon classes and co-production of biosurfactants.

| S-EPMC10051678 | biostudies-literature

Phylogenetic and functional diversity of metagenomic libraries of phenol degrading sludge from petroleum refinery wastewater treatment system.

Project description:In petrochemical refinery wastewater treatment plants (WWTP), different concentrations of pollutant compounds are received daily in the influent stream, including significant amounts of phenolic compounds, creating propitious conditions for the development of particular microorganisms that can rapidly adapt to such environment. In the present work, the microbial sludge from a refinery WWTP was enriched for phenol, cloned into fosmid vectors and pyrosequenced. The fosmid libraries yielded 13,200 clones and a comprehensive bioinformatic analysis of the sequence data set revealed a complex and diverse bacterial community in the phenol degrading sludge. The phylogenetic analyses using MEGAN in combination with RDP classifier showed a massive predominance of Proteobacteria, represented mostly by the genera Diaphorobacter, Pseudomonas, Thauera and Comamonas. The functional classification of phenol degrading sludge sequence data set generated by MG-RAST showed the wide metabolic diversity of the microbial sludge, with a high percentage of genes involved in the aerobic and anaerobic degradation of phenol and derivatives. In addition, genes related to the metabolism of many other organic and xenobiotic compounds, such as toluene, biphenyl, naphthalene and benzoate, were found. Results gathered herein demonstrated that the phenol degrading sludge has complex phylogenetic and functional diversities, showing the potential of such community to degrade several pollutant compounds. This microbiota is likely to represent a rich resource of versatile and unknown enzymes which may be exploited for biotechnological processes such as bioremediation.

| S-EPMC3366876 | biostudies-literature

A cascade of a denitrification bioreactor and an aerobic biofilm reactor for heavy oil refinery wastewater treatment.

Project description:The performance of an efficient denitrification bioreactor-aerobic biofilm reactor cascade for heavy oil refinery wastewater treatment was investigated. Optimum operation parameters for denitrification were found as follows: (1) hydraulic retention time of 8 h; (2) C/NO3 --N molar ratio of 3.75 with acetate as the carbon source; (3) 20% (v/v) carrier filling ratio in the denitrification bioreactor. Under such optimal conditions, a volumetric removal of 0.82 kg N m-3 d-1 was obtained. As an alternative low-cost carbon source to acetate, secondary DAF effluent (COD/NO3 --N mass ratio of 5.4) was also detected and a stable activity of denitrification was achieved with adding 25% volume fraction of secondary DAF effluent. Effluent COD of the subsequent aerobic biofilm reactor further decreased satisfying the requirements of the current discharge standards. High-throughput sequencing results exhibited that Rhodocyclaceae and Comamonadaceae were the dominant denitrifiers in the denitrification reactor and Pseudomonas was the dominant microbe in the aerobic biofilm reactor.

| S-EPMC9061216 | biostudies-literature

Lignin Refinery Using Organosolv Process for Nanoporous Carbon Synthesis.

Project description:Porous carbon has been widely used for many applications e.g., adsorbents, catalysts, catalyst supports, energy storage and gas storage due to its outstanding properties. In this paper, characteristics of porous carbon prepared by carbonization of lignin from various biomasses are presented. Various biomasses, i.e., mangosteen peel, corncob and coconut shell, were processed using ethanol as an organosolv solvent. The obtained lignin was characterized using a Fourier transform infrared (FTIR) spectrophotometer and a viscosimeter to investigate the success of extraction and lignin properties. The results showed that high temperature is favorable for the extraction of lignin using the organosolv process. The FTIR spectra show the success of lignin extraction using the organosolv process because of its similarity to the standard lignin spectra. The carbonization process of lignin was performed at 600 and 850 °C to produce carbon from lignin, as well as to investigate the effect of temperature. A higher pyrolysis temperature will produce a porous carbon with a high specific surface area, but it will lower the yield of the produced carbon. At 850 °C temperature, the highest surface area up to 974 m2/g was achieved.

| S-EPMC7435991 | biostudies-literature

Tracking SARS-CoV-2 RNA through the Wastewater Treatment Process

Project description:Municipal sewage carries degraded and intact viral particles and RNA (ribonucleic acid)

| S-EPMC8043203 | biostudies-literature

Enhanced treatment of dispersed dye-production wastewater by self-assembled organobentonite in a one-step process with poly-aluminium chloride.

Project description:Organobentonite has been successfully applied in industrial wastewater treatment. However, the solid-liquid separation in wastewater treatment still needs improvement. This study presents an enhanced approach with high removal efficiency and short separation time for dispersed dye-production wastewater using self-assembled organobentonite in a one-step process with poly-aluminium chloride (PAC). The enhanced effects of PAC on wastewater treatment by organobentonite were comprehensively evaluated. Following the primary decontamination by the self-assembled organobentonite, the removal efficiency for dispersed dye-production wastewater was strengthened with PAC coagulation. The removal rates of TOC and organic pollutants were 55.0% and 63.5%, respectively, with the PAC-enhanced approach and were 1.3- and 1.6-fold higher, respectively, than those with the self-assembled organobentonite approach. The combination of PAC with self-assembled organobentonite was able to break the stability of the organobentonite suspension and enlarge the floc size, and thus reduce the solid-liquid separation time from 30 min to 10 min. Additionally, this enhanced approach could improve the biodegradability of wastewater with the BOD5/CODCr ratio increasing from 0.22 to 0.39, which was 4.1-fold higher than that of only organobentonite in a one-step process. Therefore, the PAC-enhanced approach could be a promising technology for wastewater pretreatment in practical industrial applications.

| S-EPMC5533790 | biostudies-literature

Multistage Polymerization Design for g-C3N4 Nanosheets with Enhanced Photocatalytic Activity by Modifying the Polymerization Process of Melamine.

Project description:Graphene-like g-C3N4 nanosheets (NSs) have been successfully synthesized with a modified polymerization process of melamine by cocondensation with volatile salts. Volatile ammonium salts such as urea-NH4Cl/(NH4)2SO4/(NH4)3PO4 were added with melamine to modulate the thermodynamic process during polymerization and optimize the structure formation in situ. The surface area, surface structure, and surface charge state of the obtained g-C3N4 NSs could be controlled by simply adjusting the mass ratio of the melamine/volatile ammonium salt. As a consequence, the g-C3N4 NSs exhibited much higher activity than bulk g-C3N4 for the photocatalytic degradation of target pollutants (rhodamine B, methylene blue, and methyl orange), and it also exhibited greater hydrogen evolution under visible light irradiation with an optimal melamine/volatile ammonium salt ratio. The as-prepared g-C3N4 NSs with melamine-urea-NH4Cl showed the highest visible light photocatalytic H2 production activity of 1853.8 μmol·h-1·g-1, which is 9.4 times higher than that of bulk g-C3N4 from melamine. The present study reveals that the synergistic effect of the enhanced surface area, surface structure, and surface charge state is the key for the enhancement of photocatalytic degradation and hydrogen evolution, which could be controlled by the proposed strategy. The result is a good explanation for the hypothesis that adding properly selected monomers can truly regulate the polymerization process of melamine, which is beneficial for obtaining g-C3N4 NSs without molecular self-assembly. Considering the inexpensive feedstocks used, a simple synthetic controlling method provides an opportunity for the rational design and synthesis, making it decidedly appealing for large-scale production of highly photocatalytic, visible-sensitizable, metal-free g-C3N4 photocatalysts.

| S-EPMC6811846 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data