Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Insight towards Nucleation Mechanism and Change in Morphology for Nanostructured Platinum Thin Film Directly Grown on Carbon Substrate via Electrochemical Deposition.

ABSTRACT: Nanocrystalline platinum with different morphologies is synthesized via electrochemical deposition technique. The nucleation mechanism and its structural effect over the electrodeposited Pt on carbon electrodes have been systematically studied. Powder X-ray diffraction, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy are employed to study nucleation, oxidation states, and Pt structure growth on a carbon electrode. This study reports significant development of Pt metal nanoparticles with different morphologies such as a sphere, flower, core-flower, and rod-like structure directly fabricated on carbon electrode while tuning the deposition parameters such as current density, time, temperature, pH during the deposition process. The proposed electrochemical route represents a superior fabrication procedure for large-scale electrode fabrication compared to a conventional method for preparing membrane electrode assemblies for fuel cell stacks.

SUBMITTER: Dhanasekaran P

PROVIDER: S-EPMC8124617 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Extended-Surface Thin-Film Platinum Electrocatalysts with Tunable Nanostructured Morphologies

Project description:Reducing platinum

| S-EPMC10466344 | biostudies-literature

Nucleation and strain-stabilization during organic semiconductor thin film deposition.

Project description:The nucleation mechanisms during solution deposition of organic semiconductor thin films determine the grain morphology and may influence the crystalline packing in some cases. Here, in-situ optical spectromicroscopy in reflection mode is used to study the growth mechanisms and thermal stability of 6,13-bis(trisopropylsilylethynyl)-pentacene thin films. The results show that the films form in a supersaturated state before transforming to a solid film. Molecular aggregates corresponding to subcritical nuclei in the crystallization process are inferred from optical spectroscopy measurements of the supersaturated region. Strain-free solid films exhibit a temperature-dependent blue shift of optical absorption peaks due to a continuous thermally driven change of the crystalline packing. As crystalline films are cooled to ambient temperature they become strained although cracking of thicker films is observed, which allows the strain to partially relax. Below a critical thickness, cracking is not observed and grazing incidence X-ray diffraction measurements confirm that the thinnest films are constrained to the lattice constants corresponding to the temperature at which they were deposited. Optical spectroscopy results show that the transition temperature between Form I (room temperature phase) and Form II (high temperature phase) depends on the film thickness, and that Form I can also be strain-stabilized up to 135?°C.

| S-EPMC5013491 | biostudies-literature

Micro-sized thin-film solar cells via area-selective electrochemical deposition for concentrator photovoltaics application.

Project description:Micro-concentrator solar cells enable higher power conversion efficiencies and material savings when compared to large-area non-concentrated solar cells. In this study, we use materials-efficient area-selective electrodeposition of the metallic elements, coupled with selenium reactive annealing, to form Cu(In,Ga)Se2 semiconductor absorber layers in patterned microelectrode arrays. This process achieves significant material savings of the low-abundance elements. The resulting copper-poor micro-absorber layers' composition and homogeneity depend on the deposition charge, where higher charge leads to greater inhomogeneity in the Cu/In ratio and to a patchy presence of a CuIn5Se8 OVC phase. Photovoltaic devices show open-circuit voltages of up to 525 mV under a concentration factor of 18 ×, which is larger than other reported Cu(In,Ga)Se2 micro-solar cells fabricated by materials-efficient methods. Furthermore, a single micro-solar cell device, measured under light concentration, displayed a power conversion efficiency of 5% under a concentration factor of 33 ×. These results show the potential of the presented method to assemble micro-concentrator photovoltaic devices, which operate at higher efficiencies while using light concentration.

| S-EPMC7479101 | biostudies-literature

Electrochemical Self-Assembly of Nanostructured CuSCN/Rhodamine B Hybrid Thin Film and Its Dye-Sensitized Photocathodic Properties.

Project description:Nanostructured hybrid thin films of CuSCN and rhodamine B (RB) are electrochemically self-assembled (ESA) by cathodic electrolysis in an ethanol/water mixture containing Cu2+, SCN-, and RB. By selecting the solvent, Cu2+/SCN- ratio, and the concentration of RB, we demonstrate several control parameters in the film formation. High loading of RB into the film has been achieved to reach a CuSCN:RB volume ratio of approximately 2:1. The RB solid could almost completely be extracted from the hybrid film by soaking the film in dimethylacetamide (DMA), leading to a large increase of the surface area. The crystallographic orientation of the nanostructure with respect to the substrate can be controlled. Efficient quenching of fluorescence of RB has been observed for the CuSCN/RB hybrid film, implying hole injection from RB excited state to CuSCN. Photoelectrochemical study on the porous crystalline CuSCN obtained after the DMA treatment and sensitized with RB revealed sensitized photocathodic action under visible light illumination, indicating the potential usefulness of the porous CuSCN electrodes for construction of tandem dye-sensitized solar cells.

| S-EPMC4120671 | biostudies-literature

A composite CdS thin film/TiO2 nanotube structure by ultrafast successive electrochemical deposition toward photovoltaic application.

Project description:Fabricating functional compounds on substrates with complicated morphology has been an important topic in material science and technology, which remains a challenging issue to simultaneously achieve a high growth rate for a complex nanostructure with simple controlling factors. Here, we present a novel simple and successive method based on chemical reactions in an open reaction system manipulated by an electric field. A uniform CdS/TiO2 composite tubular structure has been fabricated in highly ordered TiO2 nanotube arrays in a very short time period (~90 s) under room temperature (RT). The content of CdS in the resultant and its crystalline structure was tuned by the form and magnitude of external voltage. The as-formed structure has shown a quite broad and bulk-like light absorption spectrum with the absorption of photon energy even below that of the bulk CdS. The as-fabricated-sensitized solar cell based on this composite structure has achieved an efficiency of 1.43% without any chemical doping or co-sensitizing, 210% higher than quantum dot-sensitized solar cell (QDSSC) under a similar condition. Hopefully, this method can also easily grow nanostructures based on a wide range of compound materials for energy science and electronic technologies, especially for fast-deploying devices.

| S-EPMC4266500 | biostudies-literature

Thin Film Growth of 3D Sr-based Metal-Organic Framework on Conductive Glass via Electrochemical Deposition.

Project description:Integration of metal-organic frameworks (MOFs) as components of advanced electronic devices is at a very early phase of development and the fundamental issues related to their crystal growth on conductive substrate need to be addressed. Herein, we report on the structural characterization of a newly synthesized Sr-based MOF {[Sr(2,5-Pzdc)(H2 O)2 ] ⋅ 3 H2 O}n (1) and the uniform crystal growth of compound 1 on a conducting glass (fluorine doped tin oxide (FTO)) substrate using electrochemical deposition techniques. The Sr-based MOF 1 was synthesized by the reaction of Sr(NO3 )2 with 2,5-pyrazinedicarboxylic acid dihydrate (2,5-Pzdc) under solvothermal conditions. A single-crystal X-ray diffraction analysis revealed that 1 has a 3D structure and crystallizes in the triclinic P 1‾ space group. In addition, the uniform crystal growth of this MOF on a conducting glass (FTO) substrate was successfully achieved using electrochemical deposition techniques. Only a handful of MOFs have been reposed to grown on conductive surfaces, which makes this study an important focal point for future research on the applications of MOF-based devices in microelectronics.

| S-EPMC8812052 | biostudies-literature

Nanostructured thin film polymer devices for constant-rate protein delivery.

Project description:Herein long-term delivery of proteins from biodegradable thin film devices is demonstrated, where a nanostructured polymer membrane controls release. Protein was sealed between two poly(caprolactone) films, which generated the thin film devices. Protein release for 210 days was shown in vitro, and stable activity was established through 70 days with a model protein. These thin film devices present a promising delivery platform for biologic therapeutics, particularly for application in constrained spaces.

| S-EPMC3480309 | biostudies-literature

A Novel p-Type ZnCo<sub>x</sub>O<sub>y</sub> Thin Film Grown by Atomic Layer Deposition.

Project description:Reported herein is the atomic layer deposition (ALD) of novel ternary ZnCoxOy films possessing p-type semiconducting behavior. The preparation comprises of optimized ZnO and Co3O4 deposition in sub-cycles using the commercially available precursors cyclopentadienylcobalt dicarbonyl (CpCo(CO)2), diethylzinc (DEZ) and ozone (O3). A systematic exploration of the film's microstructure, crystallinity, optical properties and electrical properties was conducted and revealed an association with Zn/Co stoichiometry. The noteworthy results include the following: (1) by adjusting the sub-cycle of ZnO/ Co3O4 to 1/10, a spinel structured ZnCoxOy film was grown at 150 °C, with it exhibiting a smooth surface, good crystallinity and high purity; (2) the material transmittance and bandgap decreased as the Co element concentration increased; (3) the ZnCoxOy film is more stable than its p-type analog Co3O4 film; and (4) upon p-n diode fabrication, the ZnCoxOy film demonstrated good rectification behaviors as well as very low and stable reverse leakage in forward and reverse-biased voltages, respectively. Its application in thin film transistors and flexible or transparent semiconductor devices is highly suggested.

| S-EPMC9565241 | biostudies-literature

Highly Efficient Nanostructured Bi2WO6 Thin Film Electrodes for Photoelectrochemical and Environment Remediation.

Project description:Nanostructured Bi2WO6 thin film electrodes with enhanced solar energy conversion and photocatalytic properties have been fabricated using Aerosol-Assisted Chemical Vapor Deposition (AACVD). By conveniently controlling the deposition process parameters, Bi2WO6 electrodes were fabricated with nanoplates and hierarchical buckyball-shaped microsphere structures morphology. A detailed study has been conducted to correlate the structure and morphology with the photoelectrochemical (PEC) and photocatalytic dye degradation performance. The PEC investigations revealed that the hierarchical buckyball-shaped microsphere structured Bi2WO6 electrodes have shown the photocurrent density of 220 μAcm-2 while nanoplates have a photocurrent density of 170 μAcm-2 at 0.23 V (vs. Ag/AgCl/3M KCl) under AM1.5 illumination. The PEC characterization of Bi2WO6 electrodes also reveals that the photocurrent density and photocurrent onset potential is strongly dependent on the orientation and morphology, hence the deposition parameters. Similarly, the methylene blue (MB) and rhodamine B (RhB) photodegradation performance of Bi2WO6 electrodes also show a strong correlation with morphology. This finding provides an appropriate route to engineer the energetic and interfacial properties of Bi2WO6 electrode to enhance solar energy conversion and the photocatalytic performance of semiconductor materials.

| S-EPMC6566810 | biostudies-literature

Matrix-free LDI mass spectrometry platform using patterned nanostructured gold thin film.

Project description:A novel matrix-free LDI MS platform using a thin film of patterned nanostructured gold, capped with methyl- and carboxy-terminated self-assembled monolayers (SAMs) is presented. Calibration on the matrix-free LDI surface was performed using a peptide standard mixture available for MALDI analysis. MS analysis for limit of detection was performed using angiotensin I peptide. Peptide fragments from standard protein digests of bovine serum albumin, bovine catalase, and bovine lactoperoxidase were used to carry out peptide mass fingerprinting analysis. Sequence coverage of each protein digest and the number of detected peptide fragments were compared with conventional MALDI MS on a standard MALDI plate. Versatility of the nanostructured gold LDI substrate is illustrated by performing MS analysis on a protein digest using different enzymes and by small molecule MS analysis.

| S-EPMC2939187 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data